• Journal of the Korean Vacuum Society
• /
• v.16 no.1
• /
• pp.46-51
• /
• 2007

The HFMX((High Flux Macromolecular X-ray crystallography) beamline at Pohang Accelerator Laboratory uses beams from a multi-pole wiggler. Two horizontal and vertical slits relevant to high heat-load are installed at its front-end. In order to treat high heat-load with reducing beam scattering, the horizontal slit has two Glidcop blocks with a grazing incidence angle of $10^{\circ}$ of a grazing-incidence knife-edge configuration. The blocks adjust the slit gap by being translated along guides by two actuating bars, respectively. Water flowing through holes, drilled along the actuating bars, cools the heat-load of both blocks. The vortical slit has the same structure as the horizontal slit except its installation direction with respect to the vacuum chamber and its grazing incidence angle. By virtue of a pair of blocks translating on guides, no alignment between both blocks is required and the installed slits show stable operating performance. The cooling performance of the two slits has been also shown to be acceptable. In this paper, the detailed explanation for the design of the two slits is presented and their operating performance is discussed.

• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.41-49
• /
• 2003

This study examined the relations between degree of posterior dental compensation and skeletal discrepancy in Class III malocclusion. The pretreatment lateral cephalogras and dental casts of 87 skeletal Class III adults were selected to provide a random sampling of skeletal Class III malocclusion. Skeletal discrepancy was described with ANB angle, Wits appraisal, SN-Mn plane angle, FMA and ratios of basal arch width. Degree of posterior dental compensation was described with maxillary intermolar angle, mandibular interolar angle and sum of intermoloar angle. The relationships between skeletal discrepancy and degree of posterior dental compensation were analyzed with simple correlation analysis, stepwise multiple regression analysis. The results were as follows 1. A strong association was found between the variation in the anteroposterior measure, ANB angle and the variation of posterior dental compensation measures, sum of intermolar angle and mandibular intermolar angle in skeletal Class III malocclusion. 2. There was no statistically significant relationship between the variation in the vertical measures and the variation of posterior dental compensation measures in skeletal Class III malocclusion. 3. There was no statistically significant relationship between the variation in the anteroposterior and vortical measures and degree of basal arch width discrepancy.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.335-343
• /
• 2019

Overtopping discharge for sea dike having low mound and high wave wall (LMHW sea dike) is investigated with hydraulic experiments in this study. Vertical, Flare and Bullnose type wave walls are selected and Tetrapods (double layer) and Accropode (one layer) are adopted for armour layers of the front slope. The results of the hydraulic experiments are compared to the overtopping formulas for armoured rubble slopes and vertical sea dikes suggested by EurOtop Manual. Predicted overtopping discharges are underestimated as the roughness efficiency factors (γ_f) of armour blocks suggested by EurOtop are adopted when the overtopping formula for armoured rubble slopes sea dike is used. Meanwhile the predicted overtopping discharges agree well with the hydraulic experiments when the modified roughness efficiency factors redefined by multiplying efficiency factor of the heights of armoured crest berm and wave wall (γ_AR) are adopted. Return wall effects on a vertical wall (Kortenhaus et al., 2003; Pearson et al., 2004a) and the effects on a smooth dike slope (Van Doorslaer et al., 2015) in EurOtop Manual are investigated for Flare and Bullnose type wave walls. As a results of the comparison between experimental results and 2 formulas, return wall effect on a smooth dike was more valid for LMHW sea dike.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.4
• /
• pp.1-8
• /
• 1985

Stability analysis of the embankment as to water level varation is the most important problem in the safety of the slope because the stress of embankment inside varies as to drawdown of seepage line. Especially when the water level is rapidly drawdown, because the flow direction of the free surface changes the toe of embankment, the factor of safety comes to small, therefore the embankment is dangered. For the purpose of studing these phenomena, the experimental models are built with sand in the laboratory. In the experimental consideration, the falling seepage line and the shape of failure are measured. This paper intends to study the failure slip surface, the relationship between the factor of safety and drawdown velocity, and hydraulic gradient. The results of the experimental study are summarized as follows; 1. Owing to the drawdown of free surface, sliding failure occurred in the upstream fill, the height of failure is 5~10, 9~15, and 13~21(cm) in each model. 2. In consideration of the distribution of pore water pressure Table-5 shows each factor of safety. In the relationship between the drawdown velocity and the factor of factor it's velocity should be limited to 0.21~0.28 (cm/sec), according to each models. In the relationship between the factor of safety and the hydraulic gradient within the upstream slope, it's gradient must be below 0.36~0.43.

• The korean journal of orthodontics
• /
• v.33 no.5 s.100
• /
• pp.339-350
• /
• 2003

The purpose of this study was to investigate the micro-implant height and anterior hook height to prevent maxillary six anterior teeth from lingual tipping and extruding during space closure. We manufactured maxillary dental arch form, bracket and wire, using the computer aided three-dimensional finite element method. Bracket was $.022'{\times}.028'$ slot size and attached to tooth surface. Wire was $.019'{\times}.025'$ stainless steel and $.032'{\times}.032'$ stainless steel hook was attached to wire between lateral incisor and canine. Length of hook was 8mm and force application points were marked at intervals of In. Four micro-implants were implanted on alveolar bone between second premolar and first molar. The heights of them were 4, 6, 8, 10mm starting from wire. We analyzed initial displacement of teeth by various force application point applying force of 150gm to each micro-implant and anterior hook. The conclusions of 4his study are as the following : 1. When the micro-implant height was 4m and the anterior hook height was 5mm and below, anterior teeth were tipped lingually. When the anterior hook height was 6mm and above, anterior teeth were tipped labially. 2. When the micro-implant height was 6mm and the anterior hook height was 6mm and below, the anterior teeth were tipped lingually. When the anterior hook height was 6m and above, the anterior teeth were tipped labially. But lingual tipping of anterior teeth decreased and labial tipping Increased when the micro-implant height was 6mm, compared with 4mm micro-implant height. 3. When the micro-implant height was 8mm and the anterior hook height was 2mm, the anterior teeth were tipped lingually. When the anterior hook height was 3mm and above, labial tipping movement of the anterior teeth increased proportionally. 4. When the micro-implant height was 10mm and the anterior hook height was 2mm and above, labial tipping of the anterior teeth increased proportionally. 5. As the anterior hook height increased, aterior teeth were tipped more labially. But extrusion occurred on canine and premolar area because of the increase of wire distortion. 6. Movement of the posterior teeth was tipped distally during maxillary six anterior teeth retraction using micro-im plant because of the friction between bracket and were Based on the results of this study, we could predict the pattern of the tooth movement according to position of micro-implant and height of anterior hook. It seems that we can find the force application point for proper tooth movement in consideration of inclination of anterior anterior teeth, periodontal condition, overjet and overbite

• Korean Journal of Agricultural Science
• /
• v.13 no.2
• /
• pp.219-226
• /
• 1986

A study was conducted to provide direct comparisons of the effect of variations in herbage use, grazing and social behaviour upon the flat, slope and forest grassland with a total 30 Korean Native Cattle and 5 Korean Native Goats under 4-year old grassland established by intensive sowing method in Daecheon. The results obtained are summarized as follows; 1. Relative intake index, dry matter intake per animal and dry matter digestibility by Korean Native Goats in flat, slope and forest grassland were 35.2%-462g-63.7%, 35.0%-459g-63.0% and 29.8%-391g-62.1%, respectively. 2. Grazing time by Korean Native Cattle was not different among the grassland types, but ruminating time was increased in slope grassland, whereas in forest grassland was decreased. Resting time was increased in forest grassland, whereas in slope grassland was decreased. Walking time was increased in flat grassland, but loafing time was increased in forest grassland. The number of rumination, chews per bolus and defecation number were decreased in forest grassland. The number of drinks, total drinking water and walking distance were increased in slope grassland. 3. Animal distance, occupied area per animal and sub group formation by Korean Native Cattle in flat, slope and forest grassland were $3.4m-11.9m^2-3.6head$, $3.56m-11.0m^2-3.7head$ and $3.70m-14.6m^2-3.4head$, respectively. The order of grazing movement was similar to the pear-shaped grazing formation, but the relations of dominance between first grazer and last grazer upon different grassland types was not clear.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.10 no.1
• /
• pp.35-40
• /
• 2011

Purpose: This study was performed to evaluate the diagnostic usefulness of ankle stress radiograph for evaluation of chronic lateral ankle instability. Materials and Methods: Among patients undergoing the modified-Brostrom procedure, 42 cases with complete rupture of the anterior talofibular ligament were enrolled in this study. Sixty Korean adults (120 cases) were recruited as the control group. Radiologic measurement of talar tilt and anterior talar translation was performed through stress radiographs using Telos device. We obtained the normal range of Korean adults, and used as a standard value for judgment of mechanical instability. We analyzed the sensitivity, specificity, positive and negative prediction value of ankle stress radiograph. Results: On ankle stress radiograph, normal range of talar tilt angle and anterior talar translation was below $8.3^{\circ}$, below 7.6mm. Talar tilt angle on varus stress radiograph showed 57% of sensitivity, 97% of specificity, 89% of positive and 86% of negative prediction value. Anterior talar translation on anterior drawer stress radiograph showed 69% of sensitivity, 97% of specificity, 91% of positive and 90% of negative prediction value. Conclusion: Ankle stress radiograph had a good specificity, positive and negative prediction value for the evaluation of mechanical instability. However it underestimated the mechanical instability of ankle joint. It must be remembered that normal stress radiograph does not exclude ankle instability.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1996.10a
• /
• pp.156-161
• /
• 1996

컴퓨터의 공학적용과 더불어 천해파의 산정은 파향선식(Ray Equation)에 근간을 두어 격자상에서 이를 산정하는 방법이 이용되어 왔는데 수심이 복잡하여 파향선이 서로 교차되는 경우, 파의 중복에 따른 영향이 반영되지 못한다. Dobson이 제시한 모형이 이러한 파향선법중에서 가장 보편적으로 적용되어 왔다. 이러한 한계를 극복할 만한 접근이 꾸준히 전개되어, Berkhoff (1972)에 의해서 완경사 방정식이 유도되기에 이르렀고 천수, 굴절, 회절, 반사등 파랑의 제 현상을 반영할수 있는 모델이 수립되기 시작하였다. (중략)

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.3 no.4
• /
• pp.62-69
• /
• 1989

휴대용 전기톱을 비롯한 학습 기계장치, 자동차 연동장치, 각종 화학 분석장치 및 산업용 로봇 시스템등의 전기설비에 광범위하게 응용되고 있는 고유 불안정 도립진자 시스템의 동적 안정화 제어기 설계기법이 소개된다. 복잡한 비선형 동특성을 고려한 수학적 모델링과 C. D. Johnson에 의해 제시된 외란 적응 제어 이론을 적응하여, 최적 레귤레이터형 안정화 제어기를 설계하였으며, 컴퓨터 시뮬레이션 및 실험결과가 만족스럽게 나타났다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2009.04a
• /
• pp.321-322
• /
• 2009

항공기에 장착되어 1개 지점을 수직 및 경사각도로 5면에서 촬영하는 항공용 다각촬영 카메라를 비롯한 항공용 멀티센서는 항공기라는 공간상의 제약으로 인해 다양한 각도로 센서를 고정하기에 어려움이 있다. 또한 항공기 운항 중 기류변화등으로 인해 촬영예상 지역을 벗어나 촬영되기 쉽다. 이에 항공용 센서의 자세를 연직방향으로 유지 시켜주는 기존 항공용 마운트를 활용할 수 있으면서, 다양한 각도로 센서를 고정할 수 있는 장치를 개발하였다.