• Geophysics and Geophysical Exploration
• /
• v.12 no.2
• /
• pp.208-214
• /
• 2009

Using the GNSS data and tilt-meter data of Boeun (BOEN) and Goesan (GSAN) GNSS stations, we have calculated the differential distance vector variation with the calculation time span set to 1 hour and 3 hour and differential tilt vector variation along time and derived an indicator of similarity between the two variations along time. The similarity such calculated is rather lower than high. But as the existence of a circular type movement of the antenna's phase center's location due to the tilt's variation of the antenna tower because of the sunlight's diurnal change is certain, we recommend to take such diurnal variation of antenna's location into consideration when the correction error in DGNSS or the measured data at reference stations in VRS (Virtual Reference System) is broadcast.

• The Journal of Engineering Geology
• /
• v.22 no.2
• /
• pp.157-171
• /
• 2012

The slope design of an open-pit mine must ensure slope stability and economic feasibility. The overall slope angle of the pit is therefore the main factor of concern because of limited support or reinforcement options available in such a setting. This study examines the optimal measurement system for monitoring the behavior of the slope in an open-pit mine using displacement measurement, data analysis, and numerical simulations for a coal mine at Pasir, Indonesia. The area of slope to be managed is extensive and the maximum displacement, as calculated by numerical analysis, is about 3,000 mm. The displacement data, measured by inclinometer and GPS, were analyzed, and the applicability of SSR (slope stability radar) was reviewed in comparison with other monitoring systems.

• Journal of the Korean Geographical Society
• /
• v.35 no.4
• /
• pp.503-518
• /
• 2000

분수계는 지형적 실체이며, 지역의 지형 연구 분야에서 자연적 경계로서 설정된다. 분수계는 수계, 산계, 유역등의 지형 요소들과 연관된다. 분수계의 지형 형성과 기능은 경사의 법칙, 구조의 법칙, 그리고 계층의 법칙으로 설명될 수 있다. 분수계는 구조적 형성과정과 기후적 삭박과정을 통하여 변화한다. 지형분수계는 능선분수계, 하천 분수계, 폐쇄 분수계, 세탈 분수계, 문턱 분수계, 세포형 분수계 등으로 유형화 될 수 있다. 지하수 분수계는 대개 지형의 기복을 반영하지만, 지역의 지질구조, 암서, 파쇄대 등으로 인하여 지형 분수계와 일치하지 않을 수 있다. 분수계의 법칙의 예외로서 설명되는 분수계의 일반적 단면은 선형이 아닌 대상 혹은 지대로서 나타난다. 분수계를 물의 흐름을 분리하는 곳으로 볼 때, 지형분수계는 지표면의 고도에 의해서 결정되며, 지하수 분수계는 지형, 지질 구조, 선구 조적 지형 요소들의 배열, 지층의 방향을 고려하여 결정된다.

• Defense and Technology
• /
• no.7 s.257
• /
• pp.44-51
• /
• 2000

자세계는 상승, 하강 및 선회시 항공기 경사 상태를 각(Degree)으로 지시해 주는 장치이다. 이 자세정보들은 항공기의 선회시, 착륙시, 그리고 폭격하기 위해 표적에 접근할 때 매우 중요하다. 자세계는 기본적으로 항공기 기축에 수직인 회전축을 가진 3축 자이로 축에 대한 항공기 자세 즉, 피칭각 및 롤링각을 지시한다.

• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.70-78
• /
• 1997

3Y-TZP/SUS316 Functionally Graded Material (FGM) was fabricated by slip casting method. Alumina mold was used to overcome problems of gypsum mold in slip casting process, and the optimal dispersion con-ditions of 3Y-TZP/SUS316 binary slurries was determined using electrokinetic sonic amplitude and a viscometer, and observing sedimentation behavior. The properties of the specimens casted by gypsum mold and alumina mold were compared in terms of changes in shrinkage rate, drying and sintering conditions, and microstructure. It was found that the specimens obtaine from the alumina mold showed a clean surface, easier thickness control of each layer, and higher productivity. Especially, no degradation was observed in the SUS316 prepared using alumina mold. Thus it is desirable to use porous alumina mold rather than gyp-sum mold for the slip casting of 3Y-TZP/SUS316-FGM.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.1
• /
• pp.85-97
• /
• 2003

This study was aimed at suggest a proper logging method of mountain forest using geographic information system(GIS) based on digital terrain model(DTM) in the National Forest at Mt. Kumsan in Namhae-gun, Gyungsangnam-do, which has about 2,948 ha in area. The areal percentage of 201 to 250m in the elevation was about 15.5%, elevation of 251 to 300m was 14.5%, and 78.75% for higher than 400m. The accumulated areal percentage of below 30% in the gradient was 17.2%, and 81.0% for steeper than 60%. The area for tractor skidding was 17.2%(511.7ha), the area for tractor attached winch skidding was 63.8%(1,896.3ha) and 18.4%(545.5ha) for cable yarding. It is important to choose the proper logging machines for timber harvesting. In general, the selection of logging operation system was affected several major environmental factors like as terrain conditions(slope gradient, slope length) and stand factors. The rate of middle slope gradients in terrain conditions showed higher than that of steep slope gradients in this area. Therefore, it considered that the logging operation system in this area could apply to tractor+winch operating machine according to terrain conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.1
• /
• pp.106-114
• /
• 2006

Uses of geosynthetics as a reinforcing material for earth structures have ever increased due to their excellent economy. fine external appearance. and easy construction. In the current practice of geosynthetics. however, the lacks of the standardized method of evaluating the soil/geosynthetics friction properties and the inconsistency of conventional design methods develop confusion to the civil engineers. The purpose of site monitoring of the retaining wall reinforced by geogrids was to evaluate the applicability of existing design methods to, and performance of. CHAMSTONE wall system. Full scale field performance during and after construction was monitored by incorporating instrumentation including strain gauges on the geogrid and soil pressure cells. The difference of the reinforcing effects of geosynthetics embedded in the soil will be also investigated by comparing of the line and curve types of retaining wall reinforced by geogrids with block type facings.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.182-182
• /
• 2016

표면영상유속계는 영상분석을 이용하여 홍수시 하천 수표면 유속을 측정하는 비접촉식 유속측정장치이다. 때문에 안전하고 편하게 홍수시 유속을 측정할 수 있으나, 실제 적용상 몇 가지 문제가 있다. 하나는 야간과 악천후에는 영상 촬영이 어렵다는 점이고, 다른 하나는 영상과 실세계와의 좌표변환을 위한 참조점 측량이 반드시 필요하다는 점이다. 본 연구에서는 열영상 카메라를 이용하여 첫 번째 문제를 해결하고, 방향센서(경사계)를 이용하여 두 번째 문제를 해결하여, 언제든지 유속측정이 가능한 실시간 표면영상유속계를 개발하였다. 열영상카메라는 별도의 조명장치없이도 주야간 영상 촬영이 가능하다. 또한 안개의 영향을 받지 않으며, 저유속시 생기는 수면파의 움직임도 잡아낼 수 있는 장점이 있다. 또한, 방향센서를 이용하여 참조점을 이용하지 않고, 좌표변환 관계를 구성할 수 있도록 카메라 모형(camera model)을 구성하였다. 이 카메라 모형에 필요한 외부 변수는 하천수표면과 카메라와의 높이 및 카메라의 두 가지 경사각뿐이다. 여기에 일반적인 카메라 보정에 이용하는 방법으로 구한 카메라 내부 변수를 결합하면 된다. 이렇게 개발한 열영상 표면영상유속계는 실험 수로와 하천 현장에 적용한 결과, 종전보다 훨씬 적용이 간편하며, 매우 높은 정확도로 유속을 측정할 수 있었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.117.1-117.1
• /
• 2007

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1619-1620
• /
• 2006

This paper deals with a new two dimensional clinometer based on dual axis micromachined accelerometers. The clinometer is a small and low-cost product, which is mainly developed to help golfers read easily the tilt of a putting green. First, this paper proposes the principle of two dimensional clinometer and also a calibration method to improve accuracy with respect to the offset voltage and sensitivity of a accelerometer. Experimental results show that the proposed clinometer can provide useful information on the tilt of an inclined plane.