• Title/Summary/Keyword: 경도특성

Search Result 3,011, Processing Time 0.042 seconds

Effects of Ar gas composition on the surface properties of AISI316L stainless steel during low temperature plasma nitriding after low temperature plasma carburizing (AISI316L stainless steel에 저온 프라즈마 침탄처리 후 질화처리 시 Ar 가스조성이 표면특성에 미치는 영향)

  • Jeong, Gwang-Ho;Lee, In-Seop
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2007.11a
    • /
    • pp.159-160
    • /
    • 2007
  • 저온 플라즈마 침탄 처리 후 연속적인 공정으로 저온 플라즈마 질화를 실시하여 내식성과 표면경도를 향상시키는 처리에서 질화처리 시 Ar 가스가 표면특성에 미치는 영향을 조사 하였다. 모든 시편의 경도가 미처리재 보다 약4배 증가하였으며, Ar가스의 양이 증가할수록 N의 침투깊이가 깊어졌다. 전체 경화증의 두께는 거의 일정하였고, 경화층은 모재보다 내식성이 증가되어 단면조직사진에서 밝게 나타났다.

  • PDF

마이크로 구동 요소부품의 PECVD를 이용한 플라즈마 질화 공정의 기계적특성 연구

  • Lee, Sang-Min;Kim, Gang-Sam;An, Gyeong-Jun;Lee, Ji-Hwan
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.301-301
    • /
    • 2013
  • 구동형 부품(Actuated component)중의 하나인 LeadScrew는 이송장치를 구성하는 핵심 부품으로 소재로는 탄소강, 합금강, 스테인레스강 등이 주로 이용된다. 다양한 IT기기의 정밀 이송 및 고속 구동에 사용되며, 제품의 성능을 결정하는 중요 핵심 부품으로 사용되고 있다. IT기기용 구동 요소 부품은 정밀 가공성의 제약으로 내식성이 우수한 스테인레스강 소재보다는 일반적으로 소재비가 저렴하고 가공성이 우수한 탄소강 소재를 사용하게 되며, 위 소재를 사용하면 대기중의 수분등에 의한 부식환경에서 쉽게 부식되어 부식방지를 위한 표면처리 기술개발이 필요하다.또한, 구동형 부품은 부품 상호간의 심한 마찰 등과 같은 가혹한 조건에 노출되어, 부품의 내마모성 및 표면 경도등을 향상시켜 부품의 수명을 연장하고자 한다. 그러기 위해 선 표면경도, 내마모성, 내식성 등의 다양한 기능이 요구되며, 성능을 만족시키기 위해서 열표면처리 공정을 확인하고자 한다.본 연구에서는 냉간압조용 강선인 SWCH계열 표면에 PECVD 장치로 플라즈마 질화공정을 이용하여 동일조건(압력, Gas flow, Power)하에서 $500{\sim}550^{\circ}C$의 온도 범위 내에서 30~300 min의 시간 조건으로 실험을 진행하였다. 위 시험편으로 XRD를 통해 각 플라즈마 질화 공정 조건에 따른 상 변화를 확인하였고, 염수분무테스트를 통해 내식성을 확인하였다. 표면경도 및 단면경도를 통한 실용질화층을 확인하고, 마모테스트를 통하여 마찰계수를 확인하여 표면경도, 내마모성, 내식성을 충족하는 공정에 대한 실험을 진행하였다.

  • PDF

Materials for Spectacle lens cutting with Glass phase (유리상 첨가한 안경렌즈 절삭용 재료)

  • Lee, Young-II
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.6 no.1
    • /
    • pp.145-148
    • /
    • 2001
  • SiC composites were developed by incorporating glass phase into SiC, in the light of improving mechanical properties of material for spectacle lens cutting. Specimens for spectacle lens cutting with glass phase as sintering additives have been fabricated by hot-pressing at $1810^{\circ}C$ for 2 hr under a pressure of 25 MPa. The fracture toughness and hardness of hot-pressed specimens were characterized and compared with previous works. Typical hardness and fracture toughness of materials for spectacle lens cutting were 12 GPa and $5.1MPa{\cdot}m^{1/2}$ respectively.

  • PDF

The Study on the properties of CrTiAlN Thin Films with Si Contents Variation by Cathodic Arc Ion Plating (아크이온플레이팅법에 의한 CrTiAlSiN 박막의 Si 함량 변화에 따른 특성 연구)

  • Jo, Yong-Gi;Yu, Gwang-Chun;Jeong, Dong-Geun
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2012.11a
    • /
    • pp.110-110
    • /
    • 2012
  • 아크이온플레이팅법과 스퍼터링법을 이용하여 금형의 보호코팅으로서 CrTiAlSiN 박막을 합성하였다. 연구는 CrTiAlN 피막에 Si이 첨가됨에 따른 농도변화가 피막의 경도 및 내열성에 미치는 영향을 조사하였다. Si 함유량 변화에 따른 특성의 변화에 대해 XRD, TGA, 경도분석, 윤활성의 분석을 통해 조사하였으며, 함성된 피막은 기존 CrN 박막 대비 내열성이 우수하게 향상되었으며 경도의 향상과 낮은 윤활성을 보였다.

  • PDF

저방사화 Cr-Mn-W-V계 스테인리스강의 미세 조직 특성 및 부식 저항성에 미치는 질소첨가와 소둔 열처리의 영향

  • 장현영;박용수;김영식
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1995.05b
    • /
    • pp.591-596
    • /
    • 1995
  • 핵융합로 제1벽재로서 주목받고 있는 저방사화 Cr-Mn-W계 오스테나이트 스테인리스강에 소량의 V을 첨가하고 그 기본 조성에 시그마상의 생성억제와 합금의 고온강도 향상에 효과가 있는 질소함량을 변화시켜 미세 조직 특성 및 부식 저항성에 미치는 영향을 살펴보았다. 질소함량의 변화에 의한 영향과 더불어 소둔열처리 온도의 영향도 살펴보았다. 부식저항성 평가를 위해서는 양극분극시험, 침지시험, Huey시험을 행하였으며, 기계적 성질 평가를 위해서는 경도시험 및 인장 시험을 행하였다 그 결과 질소량이 증가할수록 오스테나이트상이 안정화되어 그 양이 증가하며 고용강화에 의해 경도치도 함께 증가함을 알 수 있었다 경도치는 또한 소둔온도가 증가함에 의해 감소함을 알 수 있었다. 한편 소둔온도가 증가할수록 페라이트량이 증가함을 확인하였다. 부식저항성은 질소량이 증가할수록 소둔온도가 증가할수록 향상됨을 알 수 있었다.

  • PDF

지하수 개발에 따른 자료 획득 및 이용에 관한 연구

  • Son Ju-Hyeong;Jeong Sang-Yong;Kim Sun-Yeong;Park Sang-Ju;Gwon Sun-Gyu
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2005.04a
    • /
    • pp.90-93
    • /
    • 2005
  • 경상남도 합천군과 창녕군 생활용수 지하수 관정 개발시 지하수 굴착공종으로부터 얻어진 구간별 지층자료와 대수층 수질 자료를 획득하여 이용하는 방법을 연구하였다. 지층정보를 파악하기 위하여 지하수공 굴착심도 10m마다 슬라임을 채취하였으며, 대수층 관통시에 지하수 시료를 구간별로 채수하여 전기전도도 및 수질시료를 분석하였다. 경도가 높은 지역의 경우, 음용수 수질기준치에 적합한 지하수를 개발하기 위해서 대수층별 전기전도도를 분석측정하여 경도를 간접적으로 파악함으로써 지하수 굴착심도 결정에 이용하였다. 그리고 대수층 구간별 불소 농도를 파악하였으며, 불소 농도가 높은 대수층 구간에서는 하부대수층 메움 등을 실시하였다. 대수층의 수질검사결과에서 기준치를 초과하는 우려 인자들(불소, 경도, 증발잔류물, 질산성 질소, 철, 알루미늄, 아연 등)에 대한 수질기준 초과 가능성을 대비한 양수시험 모니터링을 설계함으로써 지하수공의 수질 특성 파악이 가능하였다. 양수시험과정에서 탁도가 시간에 따라 기준치 이하까지 감소하는 일반적인 경향과 기준치 이상에서 더 이상 감소하지 않는 경향에 대한 원인을 분석할 수 있었다.

  • PDF

폴리카보네이트 특성 향상을 위한 Al-Si-N 박막의 제작 및 크랙 방지

  • Song, In-Seol;An, Se-Hun;Lee, Geun-Hyeok;Jang, Seong-U;Kim, Dong-Hwan;Han, Seung-Hui
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2015.08a
    • /
    • pp.168.1-168.1
    • /
    • 2015
  • 자동차 산업분야에서 차량 경량화의 한 수단으로, 자동차용 유리를 무게가 가볍고 고강도 투명 고분자 소재인 폴리카보네이트로 대체하고자 하는 연구가 이루어지고 있다. 하지만, 폴리카보네이트의 낮은 내 마모 특성과 자외선에 의한 열화 및 변색 현상은 해결해야 할 문제점으로 지적되고 있다. 본 연구에서는, 폴리카보네이트의 내마모 특성을 향상시키기 위해 HIPIMS+ (High Power Impulse Magnetron Sputtering+) 방법을 이용하여 투과율이 확보되고, 고경도 특성을 갖는 Al-Si-N 박막을 증착하였다. 고속증착을 하기 위해 Target에 인가되는 Power를 올리게 되었는데, 열팽창 계수가 큰 고분자 물질인 폴리카보네이트 시료의 온도가 상승하여 증착된 박막과의 열팽창 계수 차이에 의해 박막에 Crack이 형성되는 문제가 발생하였다. 증착되는 Al-Si-N 박막의 공정 압력에 따른 Stress 제어 방법 및 폴리카보네이트 시료의 온도 상승을 막기 위한 알루미늄 구조체를 이용함으로써 박막의 Crack 형성을 억제하고자 하였다. 박막의 Stress를 확인하기 위하여 AFM (Atomic Force Microscope)과 OM (Optical Microscope)을 이용하여 분석하였고, 박막의 경도는 Knoop ${\mu}$-hardness tester를 사용하여 측정하였다. Al-Si-N 박막 경도는 Si at.%/(Al at.% + Si at.%) 비율이 16%에서 33 GPa의 경도를 갖는 것을 확인하였다. UV-Vis Spectrometer를 이용하여 투과율을 측정한 결과, 400-700 nm 파장의 가시광 영역 평균 투과율은 80%로 측정되었다.

  • PDF

비대칭 마그네트론 스퍼터링 장치에 의한 Ti 나노금속 함량에 따른 탄소박막의 물리적, 전기적 특성

  • Park, Yong-Seop;Lee, Jong-Deok;Hwang, Hyeon-Seok;Hong, Byeong-Yu
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.02a
    • /
    • pp.444-444
    • /
    • 2012
  • 본 연구에서는 흑연(graphite)과 티타늄(titanum; Ti) 타겟이 양쪽에 부착되어 있는 비대칭 마그네트론 스퍼터링 장치를 이용하여 Ti가 도핑되어진 탄소(a-C:Ti) 박막을 증착하였다. 흑연 타겟의 파워는 고정하고 Ti 타겟 파워를 증가시켜 탄소 박막내에 Ti의 함량을 증가시켰으며, Ti 금속 함량에 따른 탄소박막의 경도와 마찰계수, 표면의 거칠기, 접촉각 등의 물리적 특성과 비저항 등 전기적 특성을 고찰하였으며, XPS와 라만등을 이용하여 a-C:Ti 박막의 구조적 특성을 고찰하여 Ti 금속 함량에 따른 구조적 특성과 물리적 특성, 전기적 특성과의 관계를 규명하였다.

  • PDF

Study on the Hardness Measurement of Earthenware : Focusing on the Cup of the Baekje (토기의 경도측정법 연구: 백제시대 배(杯)류를 중심으로)

  • Moon, Eun-Jung;Kang, Hee-Jun;Kim, Su-Kyoung;Lee, Han-Hyoung;Hong, Jong-Ouk;Hwang, Jin-Ju
    • Journal of Conservation Science
    • /
    • v.25 no.4
    • /
    • pp.431-438
    • /
    • 2009
  • We have investigated the suitable measuring method and condition on the hardness testing for the earthenwares excavated from Poongnap mud castle in Hanseong Baekje period. The earthenwares which used on hardness testing have been classified according to Mohs hardness and external form and color. The Ultrasonic and Equotip testing method have used to the hardness testing on the surface of the earthenwares and the Rockwell and Micro-vickers testing methods have used to the hardness testing on the cross section of the earthenwares. As the results, the two methods applied to the surface of the earthenwares were very hard on the precise measurement and the measuring values were incompatible with the tendency classified according to Mohs hardness and external form and color. On the testing for the cross section of earthenware, the Rockwell-superficial hardness testing method was more suitable for the soft texture earthenware and highest reproducibility of the measuring value obtained at the test load and indentor are 15kgf and 1/16 “iron ball, respectively. The Micro-Vickers hardness testing method was suitable for the hard texture earthenware and highest reproducibility and accuracy of the measuring value obtained at the test load is 100gf. This results show strong possibility of progress on the classifying and comparing study for hardness of the earthenware and therefore active studies are expected on the field.

  • PDF

Correlations between quality indices and consumer acceptance in environment-friendly 'Campbell early' grapes (친환경 포도의 품질 인자와 소비자 기호도의 상관성 분석)

  • Lee, Da Uhm;Bae, Jeong Mi;Ku, Kyung Hyung;Choi, Jeong Hee
    • Food Science and Preservation
    • /
    • v.23 no.7
    • /
    • pp.1058-1064
    • /
    • 2016
  • This study investigated the correlation between physicochemical (color, soluble solids content (SSC), pH, titratable acidity (TA), and firmness) and sensory (appearance, taste, odor, and texture) characteristics of environment-friendly 'Campbell early' grapes to identify quality indices. For analysis, samples of similar-sized grapes were collected from five orchards. The results showed that the physicochemical characteristics of CIE $L^*$, CIE $a^*/b^*$, SSC, pH, TA, and firmness and the sensorial characteristics of color intensity, freshness of stem, odor, sourness, sweetness, and elasticity were different among groups. Correlation analysis results showed that an increase in sweetness and firmness and a decrease in sourness were associated with an increase in overall acceptance. Sourness and sweetness were positively correlated with CIE $L^*$ (r=0.88) and firmness (r=0.95), individually. In the principal component analysis results, component F1 and F2 explained 44.35% and 33.77%, respectively, of the total variance (78.12%). F1 represented firmness, sweetness, elasticity, hardness, grape odor, color intensity, sweet odor, sourness, and damage degree. F2 represented CIE $L^*$, TA, CIE $a^*$, CIE $a^*/b^*$, SSC/TA, SSC, and peel thickness. The results showed that consumer acceptance of 'Campbell early' grapes can be determined by assessing physicochemical attributes of firmness, CIE $L^*$, TA, CIE $a^*$, CIE $a^*/b^*$, SSC/TA, and SSC and various sensorial attributes including sweetness, fruit elasticity, fruit hardness, grape odor, and color intensity.