• Journal of Food Hygiene and Safety
• /
• v.32 no.4
• /
• pp.321-328
• /
• 2017

Fusarium graminearum is a mycotoxigenic plant pathogen, which could remain in harvested barley grains and produces mycotoxins at preferable conditions during storage. To elucidate the factors affecting contamination of Fusarium and Fusariotoxin in hulled barley during storage, three hulled barley grain samples were collected from Jeolla province. Moisture content of each sample was adjusted to 14% and 20%, respectively, then stored in two warehouses where temperature was controlled differently: one controlled below $12^{\circ}C$, and the other with no control. While monitoring temperature and relative humidity of warehouses hourly, grain moisture content, Fusarium occurrence, and mycotoxin level was analyzed at 1, 3, 6, and 12 month after storage. The average monthly temperature and relative humidity ranged $3{\sim}29^{\circ}C$, and 58~70% in warehouse without temperature control, whereas $3{\sim}13^{\circ}C$ and 62~74% in warehouse controlled below $12^{\circ}C$. Grain moisture content of the samples decreased in both warehouses except 14% samples which increased in the warehouse with temperature control. Fusarium frequency of the contaminated grains decreased continuously in the warehouse without temperature control. But in the warehouse below $12^{\circ}C$, Fusarium decreasing rate was slower because of high grain moisture content. In most samples, nivalenol was detected more in the warehouse without temperature control after 12 month but there was little difference after 1, 3, and 6 month. Therefore, it will be efficient to store hulled barley in the warehouse controlled below $12^{\circ}C$ to reduce Fusarium contamination when the barley is not dried properly. In addition, when storage period exceeds 12 month, it is recommended to store hulled barley in a warehouse controlled below $12^{\circ}C$ to reduce nivalenol contamination.

• Korean Journal of Ecology and Environment
• /
• v.41 no.2
• /
• pp.216-227
• /
• 2008

To understand eutrophication in the upper regions of brackish Lake Sihwa with a limited water exchange, temporal and spatial distributions of pollutants in water and sediment were investigated from March to October in 2005 and 2006. Also, pollution levels of water and sediment were estimated by trophic state index (TSI) and sediment quality guideline (SQG). Total nitrogen (TN), total phosphorus (TP), organic matter (COD), and chlorophyll $\alpha$ (Chl-$\alpha$) concentrations in the surface waters were largely varied temporally and spatially, and the variations were highest in the middle areas where strong halocline was formed. Chl-$\alpha$ concentrations in the middle area were very high in April (>$900\;{\mu}g\;L^{-1}$) when algal blooms (red tides) occurred. The relationships between TN and Chl-$\alpha$ (r=0.31), and TP and Chl-$\alpha$ (r=0.65) indicated that the algal growth was primarily affected by phosphorus rather than nitrogen. The distribution of COD was similar to that of Chl-$\alpha$, indicating that the autochthonous organic matters may be a more important carbon source, especially in the middle areas. The brackish water regions were classified as eutrophic or hypertrophic based on their TSI values ($69{\sim}76$). In addition, the content of nutrients (especially TP) in surface sediments were classified as severe polluted state, except the upper areas. Major causes of the eutrophication observed were probably due to high nutrients loading from watersheds, the phosphorus release from anaerobic sediment, and long retention time by the limited water exchange through the sluice gates.

• Journal of Animal Environmental Science
• /
• v.16 no.2
• /
• pp.153-160
• /
• 2010

Recently, the treatment of dead poultry has become more important issue because, the infected poultry, which was buried under the ground, causes environmental contaminations such as steep water and reek occurrence, etc. Therefore, in this study, we investigated the type of treatment and the composting methods influencing to the characteristics on decomposition and fermentative disinfection of dead poultry with poultry manure and sawdust. The results of the port tests showed that amputated poultry treated by the cut-sterilization were not only more decomposed, with less smell compared to the non-treated poultry carcass. When we treated thermophilic microorganism such as bacillus in this amputated poultry, the temperature of treated poultry increased much fester, the fermentation temperature didn't rise and not maintained constantly for long time due to the small size of the fermentation port. On the other hand, we did fermentation test by the layered disposal method with more poultry. In this experiment, the temperature of fermented poultry rose to $54^{\circ}C$ in a day and maintained around $55^{\circ}C$ during four weeks period. With less odor outside the experiment room. further. Also, we inoculated AI virus, ND virus in the excrement for studying the effect of fermentative disinfection. The result of the test revealed that AI virus was destructed within 60 minutes and ND virus was destructed within 30 minutes at the temperature of $56^{\circ}C$. Therefore, the investigations revealed scope of composting method for steam sterilized infected poultry in the originated area mixed with poultry manure, sawdust by thermophilic microorganism could increase the effectiveness of fermentative disinfection and decrease the environmental contamination.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.1
• /
• pp.43-50
• /
• 2005

The purpose of this study is to discuss the ways to consistently feed high quality corn silage(CS). This study evaluated the effect of the corn silage, after a certain time has elapsed, on the chemical composition and fermentation characteristics after feedout during the winter feeding period of the CS. Six samples of CS from four dairy farms(E1, E2, E3, and L1 ) were taken in order to feed the milking cows over a winter feeding Period from November of 2002 until February of the following year, 2003(six samples were taken at the fellowing dates in the following order: sample one was taken on the 23rd Nov. 2002, sample two on the 5th of Dec. 2002, 3rd sample on the 23rd of Dec. 2002, 4th sample on the 7th of Jan. 2003, 5th sample on the 22nd of Jan. 2003, and the 6th sampling was carried out on the 6th of Feb. 2003) at the three sampling sites after the opening of the trench silos at intervals of 15 days. In the dry matter contents of CS, there wasn't any specific tendency according to the elapsed time in the range of 21.3~$27.3\%$ at all low dairy farm(E1, E2, E3, and L1). And the average dry matter contents were 24.1, 25.9, 23.6, and $20.4\%$. Considering the Proper amount of the dry matter of CS during the ripen yellow stage, the appropriate moisture content was $33\%$ (NRC, 1989), and these dry matter contents were all low. A consistent tendency was not found in the contents of CS. The average of CP contents were 10.2, 8.0, 8.5, and $9.8\%$ at the E1, E2, E3, and L1 farms, and there were significant differences. The TDN contents of CS were not different among forms according to the time elapsed. The pH, according to the time elapsed after opening of the CS, there were no differences at each of E1, E2, E3, md L1 farms. Average pH were 3.5, 3.9, 3.6, and 4.1, md all of them were in normal range. In the lactic acid contents of CS, a consistent tendency was not found among four farms. But according to the time elapsed. there was a goat difference from 1.13~$7.8\%$ The acetate, propionate, and butyrate contents of CS were very low. In this study, there was no significant difference in the CS's chemical composition and fermentation characteristics according to the elapsed time at all four dairy farms. Considering the proper dry matter contents of CS during the ripen yellow stage, the appropriate dry matter content was $33\%$, and dry matter contents of few farms were all low. To enhance the quality of corn silage should be ensiled com at proper dry matter content range from 28 to $35\%$ Therefore, content of the corn plant should be always be closely monitored prior to beginning harvest.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.2
• /
• pp.132-137
• /
• 2011

BACKGROUND: This experiment was carried out to evaluate the effect of potassium fertigation on the growth and yield of fourteen years-old 'Campbell Early' grapevine (Vitis labrusca L.) on a sandy loam soil. METHODS AND RESULTS: Potassium application (125 kg/ha/yr) was top-dressed as 30% of annual potassium application in all treatments and the remainders were drip-irrigated with 0 (0% of total K, K0 level of the remainder), 25 (17.5% of total K, K1/4 level of the remainder), 50 (35% of total K, K1/2 level), and 100mg/L (70% of total K, K1 level) in the intervals of 2 times a week for 12 weeks and the effect of K drip fertigation was compared to control treatment in which the K remainder was applied with surface application as additional fertilizer. The growth of stem diameter, leaf number and shoot length were highest in K1/2 (50 mg/L K), but K of mineral contents was lowest in K0. Yield of grapevine was no difference in 2008, but significantly higher K1/2 than other treatments in 2009. However, fruit quality (color degree, brix, acid contents) was no difference among the treatment. CONCLUSION(s): From the results, It is expected that K1/2 levels of fertigation based on soil testing could be more efficient to get optimum yield and save potassium fertilizer than control (surface application) treatments when grapevine was drip-irrigated at open field condition.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.221-232
• /
• 1999

Dry matter yield and ear percent are commonly considered the most important factors for evaluating silage corn(Zea mays L.) hybrids for silage production. But quality of stover as well as forage production in important in identification of hybrids. The objective of this study was to evaluate nutritional value of stover, ear and whole plant from eight corn hybrids for silage at two dates of planting. In content of fiber components(ADF, NDF, ADL, hemicellulose and cellulose) from stover, ear and whole plant samples, optimum planting corn was lower than late planting one(P<0.01). Differences(P<0.01) in the content of fiber components in stover and whole plant were observed among the corn hybrids. Differences between different planting dates in TDN and $NE_1$ were detected in the stover and whole plant samples(P<0.05). Differences among the corn hybrids in TDN and $NE_1$ were also observed in stover, ear and whole plant samples. TDN and $NE_1$ of 'G4624', 'P3352' and 'P3394' for whole plant were higher than those of the other corn hybrids. ln vitro dry matter digestibility(IVDMD) at optimum planting date was higher than that of late(P<0.05), and there also were significant differences among the corn hybrids. Correlation coefficients for whole plant IVDMD with NDF, ADF, hemicellulose, and cellulose were $-0.82^{**}$, $-0.71^{**}$, $-0.63^{**}$, and $-0.69^{**}$, respectively. Results of this study indicate that optimum planting of corn resulted in increased quality of silage corn. Differences among corn hybrid, particularly, in nutritive value of stover and whole plant were also observed. Therefore, the nutritional value of stover and whole plant may be important in assessing the corn hybrids for silage.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.203-210
• /
• 1999

Of all the nutrients in liquid manure, N has the greatest potential both for the environment and for increasing forage yields. This experiment was carried out to determine the effect of different types and N rates of liquid manure on mineral content and nitrate-N of oats(Avena sativa L.), soil chemical characteristics in Suweon. Seven treatments consisting of chemical fertilizer $120kg\;N\;ha^{-1}$, liquid cattle manure 120, 240 and $360kg\;N\;ha^{-1}$, liquid swine manure 120, 240 and $360kg\;N\;ha^{-1}$ were arranged in a randomized complete block design with three replications. Compared with the plot of chemical fertilizer, increasing liquid manure N rates increased mineral contents of oats. Nitrate-N contents of oats were ranged from 1,881 to $2,605mg\;kg^{-1}$ in all treatments, which was orderly ranked as chemical fertilizer>liquid cattle manure $360kg\;N\;ha^{-1}$> liquid swine manure $240kg\;N\;ha^{-1}$. Contents of exchangeable cation of the soil were appeared to be higher with increasing liquid manure N rates. Amount of total-N and inorganic-N in soil affected by increasing liquid manure N rates, and there was the highest at liquid swine manure $360kg\;N\;ha^{-1}$ among the treatments. Nitrate-N concentration in infiltration water was not remarkably variable during the experimental period. Based on the results of this experiment, it is suggested that the amount of nitrogen in soil was orderly ranked as liquid swine manure $360kg\;N\;ha^{-1}$, followed by liquid swine manure $240kg\;N\;ha^{-1}$.

• Korean Journal of Food Science and Technology
• /
• v.43 no.6
• /
• pp.723-728
• /
• 2011

This study was performed to test the effect of Sargassum sagamianum extract (SSE) on shelf-life and improved quality in bread with 0.25, 0.5 and 0.75% added SSE. Bread with added SSE had reduced total microbial counts by 2 log cycles and mold cell counts by 3 log cycles. No changes in moisture content or pH occurred from days 3 to 9. In addition, bread with SSE had a lower yield of malonaldehyde than that of the control as shown by the TBARS assay. Yellowness increased in bread with added SSE, whereas lightness and redness decreased. In the sensory evaluation, taste, total preference, inner shape, and color of the bread containing 0.25 and 0.5% SSE were preferred. These results suggest that the adding 0.25 and 0.5% SSE to bread improved shelf-life and quality.

• Journal of Hospice and Palliative Care
• /
• v.18 no.4
• /
• pp.294-305
• /
• 2015

Purpose: The purpose of this study is to provide baseline data for the development of an educational program for hospice care for college students. Methods: A survey was conducted at three universities in B city with 143 students from September 5, 2014 through September 26, 2014. The data were analyzed by the SPSS 18 program. This study was approved by IRB. Results: The college students' spiritual well-being was at a medium level. Their attitudes to death were neutral, and perception of hospice care was at a medium level. Most of the participants (93.0%) had no training in hospice care. The participants' awareness of the purpose of hospice care was at a relatively high level. Their awareness of the need for hospice care was at a moderate level. The participants' spiritual well-being and their attitudes to death showed a weak but positive correlation (r=0.179, P=0.030). The relationship between their spiritual well-being and awareness of hospice care were positively correlated (r=0.203, P=0.015). Conclusion: The participants' perception of hospice care was low. Most of them had no experience of hospice care education. Also, the higher the spiritual stability was, the higher the participants' perception of the purpose and the necessity of hospice care was. And their perception of the hospice care varied depending on their family relationship, satisfaction with school life, and cognition of hospice care. Therefore, we need consider these variables to develop a hospice education program to enhance college students' attitudes to death and their perception of hospice care.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.49-59
• /
• 1984

Optimizing investigation of characteristics of underwater welding by a gravity type arc welding process was experimentally carried out by using six types of domestic coated welding electrodes for welding of domestic marine structural steel plates (KR Grade A-1, SWS41A, SWS41B,) in order to develop the underwater welding techniques in practical use. Main results obtained are summarized as follows: 1. The absorption speed of the coating of domestic coated lime titania type welding-electrode became constant at about 60 minutes in water and it was about 0.18%/min during initial 8 minutes of absorption time. 2. Thus, the immediate welding electrode could be used in underwater welding for such a short time in comparison with the joint strength of in-atmosphere-and on-water-welding by dry-, wet-or immediate-welding-electrode. 3. By bead appearance and X-ray inspection, ilmenite, limetitania and high titanium oxide types of electrodes were found better for underwater-welding of 10 mm KR Grade A-1 steel plates, while proper welding angle, current and electrode diameter were 6$0^{\circ}C$, above 160A and 4mm respectively under 28cm/min of welding speed. 4. The weld metal tensile strength or proof stress of underwater-welded-joints has a quadratic relationship with the heat input, and the optimal heat input zone is about 13 to 15KJ/cm for 10mm SWS41A steel plates, resulting from consideration upon both joint efficiency of above-100% and recovery of impact strength and strain. Meanwhile, the optimal heat input zone resulting from tension-tension fatigue limit above the base metal's of SWS41A plates is 16 to 19KJ/cm. Reliability of all the empirical equations reveals 95% confidence level. 6. The microstructure of the underwater welds of SES41A welded in such a zone has no weld defects such as hydrogen brittleness with supreme high hardness, since the HAZ-bond boundary area adjacent to both surface and base metal has only Hv400 max with the microstructure of fine martensite, bainite, pearlite and small amount of ferrite.