• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.95-103
• /
• 2009

An efficient symbol time synchronization scheme for IEEE 802.11n MIMO-OFDM based WLAN systems using cyclic shift diversity (CSD) preamble is proposed. CSD is used to prevent unintentional beamforming when the same preamble signal is transmitted through transmit antennas. However, it is difficult to find a proper starting-point of the OFDM symbol with the conventional algorithms because of time offset by multi-peaks which are result from cross-correlation of received CSD preamble with a known short training symbol. In addition, the performance of symbol time sync. is affected by AGC and packet detection position. In this paper, an optimal symbol time synch. algorithm which is composed of the boundary detection scheme between LTS and OFDM symbols, the verification scheme for enhancement of boundary detection accuracy, and the SNR-varying threshold estimation scheme is proposed. Simulation result show that the proposed algorithm has performance gains of 4.3dB in SNR compared to the conventional algorithms at the rate of 1% sync. failure probability for $2{\times}2$ MIMO-OFDM system and 18dB at 0.1% when maximum frequency offset exists. It also can be applied to $4{\times}4$ MIMO-OFDM system without any modification. Hence, it is very suitable for MIMO-OFDM WLAN systems using CSD preamble.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.7
• /
• pp.567-578
• /
• 2015

Single droplet-wall collision heat transfer characteristics on a heated plate above Leidenfrost temperature were experimentally investigated considering the effects of impact velocity. The collision characteristics of the droplet impinged on the heated wall and the changes in temperature distribution were simultaneously measured using synchronized high-speed video and infrared cameras. The surface heat flux distribution was obtained by solving the three-dimensional transient heat conduction equation for the heated substrate using the measured surface temperature data as the boundary condition for the collision surface. As the normal impact velocity increased, heat transfer effectiveness increased because of an increase in the maximum spreading diameter and a decrease in the vapor film thickness between the droplet and heated wall. For We < 30, droplets stably rebounded from a heated wall without breakup. However, the droplets broke up into small droplets for We > 30. The tendency of the heat transfer to increase with increasing impact velocity was degraded by the transition from the rebounding region to the breakup region; this was resulted from the reduction in the effective heat transfer area enlargement due to the breakup phenomenon.

• The Journal of the Petrological Society of Korea
• /
• v.19 no.4
• /
• pp.269-281
• /
• 2010

The compiled recent precise age data for the plutonic intrusions of Korean peninsula display that the Jurassic igneous activities occurred on the Yeongnam massif since ca. 200 Ma close to the boundary between Triassic and Jurassic. Since then the igneous activities propagated toward further north through time. The Jurassic igneous activities over the Okcheon belt and its vicinity areas began at about 180 Ma when igneous activities of the Yeongnam massif had been almost over. The igneous activities within the Gyeonggi massif located further north started at somewhat later period ca. 170 Ma. Jurassic igneous activities over the Okcheon belt and its vicinity areas ended a little earlier than the Gyeonggi massif area. Such timing differences upon geographic positions within the Korean peninsula seem to reflect variations in distance to the trench, in the direction of subduction, and/or in subduction angle. Therefore precise understanding of the variations in emplacement ages of Jurassic plutons within Korean peninsula can be a important clue to reconstruct the paleogeography and tectonic environment of the northeast Asia during the Jurassic.

• Science of Emotion and Sensibility
• /
• v.13 no.1
• /
• pp.235-242
• /
• 2010

Emotion science is one of the rapidly expanding engineering/scientific disciplines which has a major impact on human society. Such growing interests in emotion science and engineering owe the recent trend that various academic fields are being merged. In this paper we review the recent techniques in the measuring the emotion related elements and applications which include animal model system to investigate the neural network and behaviour, artificial nose/neuronal chip for in-depth understanding of sensing the outer stimuli, metabolic controlling using emotional stimulant such as sounds. In particular, microfabrication techniques made it possible to construct nano/micron scale sensing parts/chips to accommodate the olfactory cells and neuron cells and gave us a new opportunities to investigate the emotion precisely. Recent developments in the measurement techniques will be able to help combine the social sciences and natural sciences, and consequently expand the scope of studies.

• 한국데이터정보과학회:학술대회논문집
• /
• 2006.04a
• /
• pp.267-278
• /
• 2006

The purpose of this research is to identify differences between characteristics of purchase behavior of outdoor wear consumers, demographic variables and mountain climbing related variables. The subjects of surveys are selected among men and women consumers having experiences of purchasing outdoor wear in ages from 20's to over 50's who live in the vicinity of Busan. Data and information collected are analyzed by using SPSS Program. Results from the analysis of purchasing purpose indicates that they buy outdoor wear conducive to two similar reasons; that is, "only to exercise and enjoy mountain climbing" and "either to wear it in time of climbing mountain or everyday life," and results from the analysis of purchase frequency reveals that '$1\sim2$ times'a you is the highest. Results from analysis of preference of brand of outdoor wear reveals that Kolon Sport is followed by the North Face and K2.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.4
• /
• pp.41-49
• /
• 2008

H.264/AVC supports variable block motion compensation, multiple reference images, 1/4-pixel motion vector accuracy, and in-loop deblocking filter, compared with the existing compression technologies. While these coding technologies are major functions of compression rate improvement, they lead to high complexity at the same time. For the H.264 video coding technology to be actually applied on low-end / low-bit rates terminals more extensively, it is essential to improve tile coding speed. Currently the deblocking filter that can improve the moving picture's subjective image quality to a certain degree is used on low-end terminals to a limited extent due to computational complexity. In this paper, a performance improvement method of the deblocking filter that efficiently reduces the blocking artifacts occurred during the compression of low-bit rates digital motion pictures is suggested. In the method proposed in this paper, the image's spatial correlational characteristics are extracted by using the variable block information of motion compensation; the filtering is divided into 4 modes according to the characteristics, and adaptive filtering is executed in the divided regions. The proposed deblocking method reduces the blocking artifacts, prevents excessive blurring effects, and improves the performance about $30{\sim}40%$ compared with the existing method.

• Journal of the Korean association of regional geographers
• /
• v.13 no.3
• /
• pp.301-320
• /
• 2007

In Korean academic societies, old maps has not yet been properly investigated in terms of their genealogy, classification, detailed place names, historical backgrounds and the other aspects. With publication of the bibliographies and papers on old maps reserved in museum and library, the scope of research enlarged gradually its scope from 1970s. In 1980s, with the development of theoretical geography, scientific analysis were applied to investigate the projection method of Daedongyeo-jido. The 1990s proved a prominent decade for researches. The photo-copies of old maps enabled researchers to investigate the in-depth comparative study. The more important thing is that old maps became to be powerful instrument in the research of historical geography, such as territorial disputes and marine name(東海). And county old maps compiled by region became to be regional-cultural contents of local areas. Important issues in old map research in Korean academic societies are about Cheonha-do which is unique old world map in Korea, grid-system projection in old county maps and the genealogy of Daedongyeo-jido(manuscript and block print edition). This study shows that bibliography of all old maps preserved in each library and museum should be standardized. This could enable the exchange of information of old maps between institutes. The more important thing is that conciliation of human, social and natural sciences should be applied in the research of old maps.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.545-556
• /
• 2015

This study is to project the future snowfall and to assess heavy snowfall vulnerable area in South Korea using ground measured snowfall data and RCP climate change scenarios. To identify the present spatio-temporal heavy snowfall distribution pattern of South Korea, the 40 years (1971~2010) snowfall data from 92 weather stations were used. The heavy snowfall days above 20 cm and areas has increased especially since 2000. The future snowfall was projected by HadGEM3-RA RCP 4.5 and 8.5 scenarios using the bias-corrected temperature and snow-water equivalent precipitation of each weather station. The maximum snowfall in baseline period (1984~2013) was 122 cm and the future maximum snow depth was projected 186.1 cm, 172.5 mm and 172.5 cm in 2020s (2011~2040), 2050s (2041~2070) and 2080s (2071~2099) for RCP 4.5 scenario, and 254.4 cm, 161.6 cm and 194.8 cm for RCP 8.5 scenario respectively. To analyze the future heavy snowfall vulnerable area, the present snow load design criteria for greenhouse (cm), cattleshed ($kg/m^2$), and building structure ($kN/m^2$) of each administrative district was applied. The 3 facilities located in present heavy snowfall areas were about two times vulnerable in the future and the areas were also extended.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.2
• /
• pp.444-475
• /
• 2013

This study explores the trajectories of institutionalization for technology transfer both in the U.S. and Korea, particularly focusing on two universities: Korea Advanced Institute of Science and Technology (KAIST), and the University of California (UC). By comparing the diverging paths of the two universities in setting up institutions, this paper examines the limits of and lessons for technology transfer policies both to Korean government and universities in Korea. The University of California was involved in designing rules and codes, on one hand, to stimulate its members' engagements with technology transfer activity and, on the other hand, to keep its academic integrity since, no later than, the 1960s. The efforts and consequences range from its rules of patenting system to its codes of conducts. Through making rules formal and resolving conflicts on technology transfer activity, the U.S., and the University of California have decreased uncertainties for its members' engagements with industries. By contrast, KAIST has not built up such range of rules or codes due to its shorter experience and its constraining legal contexts. Korea introduced the legal format of the US Bayh-Dole Act in 2002, and its central government has led the initiatives for technology transfer, not allowing much latitude for its universities. This study implies a set of policy recommendations to the Korean government and KAIST: to build entrepreneurial universities, the government should give greater latitude to universities, so universities should be more rigorously engaged in developing their own rules and routines; the government, rather, should focus on providing bridging R&D funds like the Small Business Innovation Research (SBIR), so researchers could draw on resources to move their basic research into next phases; KAIST would be better to promote its members to engage with industries, and introduce conduct codes that allow its academics to engage in industrial activity, rather than building up its commercialization facilities.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1706-1710
• /
• 2007

하천의 교각주위에는 국부세굴현상과 이에 따른 퇴적현상이 나타난다. 특히 교각주위에서의 국부세굴특성은 교량의 안전성과 관련하여 중요한 문제가 되므로 세굴의 크기를 감소하기 위한 대책이 필요하다. 교각주위에서의 국부세굴현상은 교각부 인근에 형성되는 말발굽형 와류가 중요한 역할을 하고 있는 것으로 알려져 있다. 따라서 교각주위에서의 수류변화를 적절히 제어함으로서 세굴특성을 감소하고자 하는 연구가 행해져 오고 있으며, 교각에 원환(collars)을 설치하거나 조도를 증가시킴으로 세굴감소 대책을 제안하고 있다(Zarrati et al, 2006). 본 연구에서는 교각주위에서의 세굴을 감소하기 위해 원주교각의 표면을 파상형(riblet type)으로 하였으며, 파상형교각의 기본개념은 원주교각 전면에 나타나는 하강류를 파상형 원주내로 흡수하여 세굴작용을 감소시키고자 하는 것이다. 이같은 형식은 원주형 교각에 원환을 설치하는 방법이 대표적이며 하상과 교각사이 경계부에 수평방향의 단일 파형(single riblet type)을 설치한 Sato et al(1993)의 연구가 있다. 이들의 결과에 의하면 원형교각과 비교하여 초기 세굴감소 효과가 있음을 확인하였으나 시간경과에 따라 세굴이 점차 증가하고 있는 바 그 원인으로서 세굴이 진행되면서 하상면과 단일 파형과의 간격이 확대하여 단일파형내로의 흐름흡수 효과가 감소하기 때문으로 보고되었다. 따라서 여기서는 이같은 문제를 해결하기 위해 다단의 오목 및 볼록 파상형(concave/convex riblet type) 원주교각에 대한 국부세굴 특성을 검토하였다. 또한 원주형의 교각에서는 단일원주보다는 원주군으로 설치되는 경우가 대부분이며 이때 교각의 직경(D)에 대한 교각 사이 간격$(L_d)$의 비$(L_d/D)$에 따른 전면교각에서의 수류변화의 영향이 후면교각에 작용하여 상호 복합적인 흐름 및 세굴특성을 나타내므로 이와 같은 복렬형 원주군의 세굴특성을 파상형 원주교각에 적용하여 국부세굴의 크기 변화를 해석하였다. 따라서, 교각주위에서의 수류특성 및 세굴의 변동은 원주군 및 교각파상의 크기와 간격 등과 같은 구조물의 배열조건과 Froude 수, 수심 등의 수리학적 조건에 따라 달라지므로 이의 조건을 체계적으로 변화시켜 가면서 교각주위에서의 국부세굴 및 세굴 감소특성을 검토하였다. 실험결과 오목 및 볼록 파상형 원주 주위에서의 세굴크기는 원형원주와 비교하여 전체적으로 감소하는 것으로 확인되었으며 특히 오목형 $B/\acute{h}=3$에서는 세굴경감효과가 탁월하여 70%이상 감소하는 것으로 확인되었으나 볼록형 $B/\acute{h}=5$에서는 세굴촉진특성이 나타나고 있는 것으로 나타났다. 따라서, 파상형 원주에서는 하강류나 와류를 파상형의 내부로 유도하여 세굴의 크기를 조절할 수 있는 최적의 파상이 존재하고 있는 것으로 예측되었다.