• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.969-977
• /
• 2022

Currently, in Korea, aerial photogrammetry is being studied for cadastral boundaries and numerical maps. Since the announced value of cadastral survey is closely related to ownership, the accuracy and reliability of the published value should be emphasized above all else. However, although aerial photogrammetry has great advantages in economic feasibility and surveying efficiency, it has many limitations when extracting the boundary of cadastral survey based on the acquired image. In order to improve these limitations, in this study, an aerial target was applied to obtain reliability improvement. Therefore, in order to examine the usefulness of aerial photogrammetry for cadastral survey application, cadastral boundary extraction and accuracy comparison analysis were conducted.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.143-152
• /
• 2010

These days, we can't confirm cadastre information about stereoscopic digital map that was consist of 2 dimensions and more difficult to understand of detailed parcel boundary, area, land using for 3 dimensions. An each local government providing three-dimensional that are connected to an aerial photograph with cadastre maps. Satisfaction is high for citizens but, this service additional cost for purchase of an aerial photograph order to provide of it. So far, in various ways are under study about three dimensions using Google Earth which is possible to provides 3 dimensional information by real time for individual parcel situation. The purpose of this study was analyzed an accuracy of overlapping between cadstre maps and an image on Google Earth Web in the each different coordinates system. Also, this paper could be provided for use possibility of 3 dimensions information service with an indicator of using or a guideline of direction for local government which provide 3 dimensions information oneday.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.1
• /
• pp.23-30
• /
• 2015

A shoreline mapping is essential for describing coastal areas, estimating coastal erosions and managing coastal properties. This study has planned to map the 3D shorelines with the airborne LiDAR(Light Detection and Ranging) data and the KOMPSAT-2 imagery, acquired in Uljin, Korea. Following to the study, the DSM(Digital Surface Model) is generated firstly with the given LiDAR data, while the NDWI(Normalized Difference Water Index) imagery is generated by the given KOMPSAT-2 imagery. The classification method is employed to generate water and land clusters from the NDWI imagery, as the 2D shorelines are selected from the boundaries between the two clusters. Lastly, the 3D shorelines are constructed by adding the elevation information obtained from the DSM into the generated 2D shorelines. As a result, the constructed 3D shorelines have had 0.90m horizontal accuracy and 0.10m vertical accuracy. This statistical results could be concluded in that the generated 3D shorelines shows the relatively high accuracy on classified water and land surfaces, but relatively low accuracies on unclassified water and land surfaces.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.545-552
• /
• 2017

Aeolian dunes are typical sand dunes which are maintained and developed by interactions of earth surface, wind and vegetation. Developing a model which can predict the changing phenomena of these sand dunes is vital in enhancing the efficiency of understanding and management of terrains such as land degradation. In the existing models, however, there is lack of studies on the long - term behaviors of the sand dunes and application to actual topography. Therefore, this study applied the wind-vegetation model considering vegetation to the actual topography and analyzed the applicability of the wind-vegetation model by analyzing the long-term behaviors and comparing them with actual data. Through analysis, study found out that use of wind-vegetation model and data from unmanned aerial vehicle is effective in analyzing the changes of actual dune topography. Except for the boundary, the error of about 1m was generated compared with the change of the actual dune topography.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.441-448
• /
• 2011

Lately, digital restitution was became common using digital aerial photos. Therefore, we can obtain three-dimensional data. As a plotting-maker is checked by naked eye, plotting original data is very useful for making reliable three-dimensional data including contour and elevation point layers. In this study, we want to make precise and accurate digital elevation model using plotting original data. Contour and elevation point layers was extracted in digital map and break line was extracted in plotting original data. And then, compared both of results. For comparison, we selected slight slope and complex topography area like a residence area, mountain and agricultural land. We extracted break line deleting layer until obtaining ideal digital elevation model. As the results, We could extract contour, elevation points, eight road and two boundary layers using break lines. And We could obtain precise elevation model. Editing break lines, the distortion of digital elevation model could be minimized in the complex and sharp slope area.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.958-962
• /
• 2008

하천유황, 하상재료, 하도지형의 자연적 또는 인위적 변화에 의한 장 단기적 하상변동의 해석 및 예측은 하천계획 및 관리를 위해 필수적이다. 특히, 제방 축조 등의 인위적 정비로 충적층 발달이 미약한 우리나라 하천은 상대적으로 종단형의 변화가 중요한 문제로 등장하였다. 하천의 이수, 치수 및 환경기능에 복합적으로 영향을 미치는 장기적인 하상변동 예측을 국가하천 형산강에 대해여 HEC6 모형과 GSTARS 모형을 이용하여 수행하였다. 본 연구에서는 $2006{\sim}2007$년 동안 형산강에서 직접 실측한 유량-유사량, 하상토, 하천측량자료를 GSTARS와 HEC6 모형에 적용하여 장기 하상변동을 모의하고 그 결과 값을 비교 분석하였다. 수위표 지점인 형산교(모아), 강동대교(안강), 국당2교(부조), 신형산교(대송)를 내부경계조건으로, HEC-RAS를 통하여 조도계수 값을 보정하였으며 유량 값은 유황곡선을 통하여 연간유입량을 각 날짜별로 구성하였다. 모형의 검증은 Laursen (1963), Laursen (Modified by Maddden, 1985), Laursen (Modified by Copeland, 1990), Yang (1973) 공식을 이용하여 최심하상고 변화량 제곱근 오차가 가장 작은 공식을 선정하였다. 2006년 형산강에서 실측된 하천측량자료를 이용하여 14년간 장기하상을 모의해 본 결과 형산강 유역에서는 Laursen (Modified by Copeland, 1990, HEC6)와 Laursen (1958, GSTARS)공식이 가장 작은 오차를 나타내었으며 HEC6와 GSTARS는 하상변동의 경향을 잘 나타내었다. 형산강의 전반적인 하상변동 경향은 상류지역은 전반적으로 하상이 저하하였고 하류지역은 하상이 상승하였다. 또한 하류부는 하상이 안정화를 이루고 있어 변화가 적은 것으로 판단된다. 하지만 검증 기간 동안의 골재채취와 보의 설치 등의 외부 여건과 신뢰성 있는 유입유량을 반영하지 못하였기 때문에 보다 나은 결과를 얻기 위해서는 지속적인 유량-유사량의 관측과 자료의 보완 및 정밀 조사 분석이 필요하다.

• Spatial Information Research
• /
• v.17 no.1
• /
• pp.89-102
• /
• 2009

The information of ocean topology is the fundamental source which is necessary for understanding the ocean, producing nautical charts and delimiting maritime boundaries. An echo sounder is being used generally to collect undersea bathymetric data, but an indirect method such as geophysical data acquired by satellites is being used recently. In this study, the outputs of ocean surveying for the production of the Basic Maps of the Sea in 1996 and 1997 in the East Sea and the bathymetric data produced by geophysical data are compared and analyzed. The study areas are Ulleung Plateau, Ulleung Basin and the southern area of Ulleung Basin which have different geophysical characteristics. Through this study, we found that the bathymetric data acquired by an indirect method using satellite is similar to the field surveying results in general configuration of ocean floor and average depth. However, the minimum square error is about 100m in 1700m depth, and it has been observed a local error up to 1000m. In addition, it has been found that the detailed undulation of ocean topology is shown on the gravity data which is acquired by the research vessel.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2000

In the recent day, the necessity and the effective usage are increased rapidly, and it is applied in many other fields as well as in the field of ortho-photo map. In this study, we extract each objects on the aerial image and automatically classify graphic information to produce digital map using only digital ortho-image without particular drawing devices for producing digital map. For this purpose, we have applied a lot of the image processing techniques and fuzzy theory, classified outline and lane of road and building, and had each layer according to each feature. Especially, in the case of the building, the outer vector lines extracted by pixel unit at the building were very complex, but we have developed the program to be expressed by I-dimensional linear type between building corners. In the result of this study, we could not extract and recognize all of the object on the image all together, but we have got the error within 50cm using semi-automatic technique. Therefore, this method will be used effectively in producing 1/5,000 digital map.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.407-414
• /
• 2008

This study introduces an automatic image matching algorithm that can be applied for the scale different image pairs consisting of the satellite pushbroom images and the aerial frame images. The proposed method is based on several image processing techniques such as pre-processing, filtering, edge thinning, interest point extraction, and key-descriptor matching, in order to enhance the matching accuracy and the processing speed. The proposed method utilizes various characteristics, such as the different geometry of image acquisition and the different radiometric characteristics, of the multi-sensor images. In addition, the suggested method uses the sensor model to minimize search area and eliminate false-matching points automatically.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.443-452
• /
• 2008

To deduce 3D linear information which express shapes of buildings out of airphoto by fusion of airphoto and LiDAR data, this research went through 2 process. First, research made LiDAR data into projected data of 2D based on airphoto. For this, the virtual points were added to solve the visual problem of building boundary area which has poor information because the attribute in LiDAR data. Research construct irregular triangular nets from modified LiDAR data and judge visual triangular nets out of image. Through this, research can make reference to information of triangular nets in each image pixel. Second, 3D information was extracted from stereo images segments by combining extracted information of visible region and 2D irregular triangular nets. Matching way based on TIN for segments from stereo images was used. Matching condition based on TIN can improve about 20% of edge matching accuracy compared to existing quadrilateral condition of epipolar geometry.