• Geotechnical Engineering
• /
• v.8 no.1
• /
• pp.7-18
• /
• 1992

This paper is a basic study of three by finite element method. Plate and medium. Plate is discretized 4 node p melt. At the interface between plate a melt is adopted for considering plate Measured vertical displacement out by plate foundation interaction finite zion is followed as ; 1. as being interface element adopts dation interaction finite element 2. As being interface element and platefoundation interaction finite 3. As being interface element adopte Therefore, post processing that as.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.06a
• /
• pp.8-10
• /
• 2018

자동차에서 전장부품이 차지하는 비중이 증가하고 있다. 그런데 전장부품이 증가하면서 전자제어장치의 오작동으로 인한 사고 및 인명손실의 위험이 커졌다. 자동차 환경에서 발생하는 진동, 열기, 습기, 전자파를 차단하여 전장부품의 안정성을 확보와 위험을 최소화하기 위해 자동차 OEM에서는 Conformal Coating 기술을 적용하는 것이 일반적이다. Conformal Coating된 PCB 회로의 신뢰성을 높이기 위해서는 코팅 과정에서 발생하는 기포를 억제해야 한다. 그럼에도 불구하고 기포가 발생한 경우에는 해당 PCB를 폐기하는 것이 중요하다. 본 논문에서는 코팅된 PCB에서 발생한 기포를 자동으로 검사하기 위한 전처리 과정으로서 검사 소자의 경계면과 평탄면 영역을 추정/분할하는 영상처리 알고리즘을 제안한다. 코팅 기포의 특성이 소자의 경계면과 평탄면에서 매우 다르게 나타나므로 효율적인 기포 검출을 위해서 영역 분할은 필수적인 전처리 과정이다.

• The KIPS Transactions:PartB
• /
• v.19B no.3
• /
• pp.201-208
• /
• 2012

Accurately segmenting lumen border in intravascular ultrasound images (IVUS) is very important to study vascular wall architecture for diagnosis of the cardiovascular diseases. After each of IVUS image is transformed to a polar coordinated image, initial points are detected using wavelet transform. Then, lumen border is initialized as the set of important points using non parametric probability density function and smoothing function by removing outlier initial points occurred by noises and artifacts. Finally, polynomial curve fitting is applied to obtain real lumen border using filtered important points. The evaluation of proposed method was performed with related method and the proposed method produced accurate lumen contour detection when compared to another method in most types of IVUS images.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10b
• /
• pp.628-630
• /
• 2004

정렬되지 않은 3차원 측정 점들로부터 이들을 근사하는 표면을 재구성하는 방법을 제안하였다. 제안된 방법은 경계면 축소포장 방식에 의한 표면 재구성 방법 (shrink-wrapped boundary face : SWBF)으로, 측정 점으로부터 경계셀과 경계면을 구해 초기 메쉬를 생성하고 이를 연속적으로 축소하는 방식에 의해 표면을 재구성한다 제안된 방법은 기존의 표면 축소포장 방식의 메쉬 생성 방법의 문제점인 물체의 토폴로지에 대한 제악이 없이 어떠한 형태의 표면 재구성에도 적용이 가능하며, 기존 방법이 축소 단계에서 각 메쉬 정점에 대한 최단거리 측정점을 찾는 전역 탐색을 해야 하는데 비해 지역 탐색만으로 최적의 측정 점을 찾을 수 있으므로 처리 시간 측면에서도 우월하다. 실험을 통해 제안된 표면 재구성 알고리즘이 측정 점들간의 관계를 알 수 없는 정렬되지 않은 3차원 정들에 대한 표면 재구성에 매우 안정적이고 효과적임을 확인할 수 있었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5B
• /
• pp.591-594
• /
• 2008

Present study aims at the development of a reasonable boundary condition for a structure over inclined seabed in case of the numerical model with quadrilateral mesh system. The technique for the inclined impermeable/permeable boundary in the quadrilateral mesh is newly proposed. The new technique and LES-WASS-3D model (Hur and Lee, 2007) have been used for the investigation of the dynamics of fluid field, and validated through the comparison with a typical stair-type boundary condition. 3-Dimensional numerical model with Large Eddy Simulation is called LES-WASS-3D, and is able to simulate directly interaction of WAve Structure Sea bed/Sandy beach.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.9
• /
• pp.995-1005
• /
• 2005

The study with laboratory sandbox model has been carried out to address potential use of reclaimed water, as a countermeasure artificially recharging the coastal aquifer, to effectively prevent from seawater intrusion due to overexploitation. It also investigated plausibility for either preserving or recovering the freshwater interface facing with seawater intrusion. To do this, we assessed hydraulic properties in artificial aquifer seawater/freshwater interface) depending upon the variation of extraction, storage and injection of reclaimed water. The variation of interface between freshwater and seawater were visualized by Surfer 8(Golden Software, USA) according to given experimental conditions. The interface between seawater and freshwater has been sensitively influenced by the change of extraction rate, where seawater zone migrated much faster into freshwater zone even though extraction rate became decreased. However, decreasing recharge rate could slow down moving of saline water zone toward freshwater zone. When the recharge was solely introduced into the sand box model, saline water intrusion was retarded than those of recharge and extraction working together. And also, the level of salinity of saline water was diluted by artificial recharge. It finally revealed that the artificial recharge would hydraulically avoid seawater intrusion while the freshwater sources could be conservatively utilized.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.5
• /
• pp.404-411
• /
• 2007

new domain/boundary decomposition method is suggested to perform efficient finite element analyses of contact problems. A penalty method is used for connecting an interface or contact interfaces with neighboring subdomains that satisfy continuity conditions. As a result, the derived effective stiffness matrices are always positive definite, and computational efficiency can be improved to a considerable degree. Moreover, any complex-shaped domain can be divided into independently modeled subdomains without considering the conformity of meshes along the interface. Using a computer code based on the present method, these advantageous features are confirmed through a set of numerical examples.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.1
• /
• pp.121-129
• /
• 1996

본 연구에서는 대기 습도변화에 의한 콘크리트 보수체(기층 콘크리트/보수 모르터)의 파괴현상을 조사하기 휘해서 보수체내의 비정상적인 습도분포를 계산하였다. 계산된 습도분포에 의해서 기층과 보수층 경계면 부위의 습도차이가 보수층 두께(0.5~2.5cm)와 보수작업전 기층 콘크리트 표면의 습윤처리시간(0~72hr)을 주요 변수로 하여 조사되었고, 이는 주로 시멘트 모르터로 보수된 접촉면이 없는 보수체에서 수행되었다. 계산 및 조사결과 보수층 두께가 감소하고 습윤 처리시간이 증가할수록 경계면 부위의 습도차이는 감소하는 경향을 보였고, 특히 보수후 습도차이가 음수값이 될 때의 시간을 하나의 수식으로 표시하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.12
• /
• pp.1165-1172
• /
• 2009

The laminar boundary layer along a streamwise corner formed by two flat plates intersecting at right angle is measured by using Particle Image Velocimetry(PIV) technique. The free stream velocity ranges from 2.96m/s to 3.0m/s. The angle of incidence of the corner is set to 1.2 degree providing slightly favourable pressure gradient to ensure a laminar flow in the corner region. A round shape leading edge is used and the length of the model is about 1000mm. In the bisector plane, the measurement data show separation type velocity profiles having an inflection point which is a typical characteristic of laminar corner boundary layers. As the distance away from the bisector plane increases, velocity profiles are found to change into the Blasius profile. The change completes around half length of the boundary layer thickness in the bisector plane away from the bisector plane along the plate. In the bisector plane, the growth characteristic of the boundary layer thickness and the approximate similarity of velocity profiles are confirmed from the measurement data.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.6
• /
• pp.515-522
• /
• 2017

In this paper, an isogeometric analysis for multipatch problem is investigated, in which two or more geometries are connected at the interface in a conforming or non-conforming conditions. To express higher continuity at the patch interface, two approaches such as Nitsche based method and master-slave method are formulated for the linear elasticity problem and discretized using the isogeometric approach using NURBS basis functions. A short comparison between two approaches in formulations reveals the pros and cons of them with the applicability in the isogeometric multipatch problem. In addition, a NURBS based stress recovery is adopted to express a better stress continuity through the post-processing. Numerical examples indicate the effectiveness of Nitsche method in the non-conforming patch, following the exact solution well. For the stress concentration problem with the conforming patch, introduced two methodologies show comparative results, meanwhile the NURBS based stress recovery presents an improved smooth stress contour in the whole domain including the patch interface.