• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.218-219
• /
• 2003

광결합 현상은 근접한 도파로에서 발생하며 각 도파로의 에너지를 다른 도파로로 전이시킨다. 이러한 특성은 광스위치, 광변조기, 광필터 및 광결합／분리기에 널리 사용된다. 이중에서 많이 사용되는 소자중 하나가 방향성 결합기이며 크게 입력부, 접근부, 결합부로 나눌 수 있다. 이때 광결합 현상은 결합부뿐만 아니라 접근부에서도 발생하기 때문에 소멸비는 나빠지게 된다. 본 논문에서는 접근부의 입사각에 따른 소멸비 변화와 이에 대한 조건을 분석하였다. (중략)

• Korean Journal of Materials Research
• /
• v.6 no.2
• /
• pp.158-165
• /
• 1996

열증착기(thermal evaporator)로 증착시킨 Cu를 상온에서 3.5M CuCl2+0.5M HCI+0.5MKCI 용액을 사용하여 습식각하고 2일간 대기중 노출시킨 후 X-선 광전자 분광기를 이용하여 표면의 결합상태를 관찰하였다. 그 결과 습식식각된 Cu 표면에서는 C, O, Ci 및 Cu가 존재함을 알 수 있었다. 표면원소에 대한 오제이 전자 스펙트라(Auger electron spectra)와 광전자 스펙트라(photoelectron spectra)의 정량적인 비교를 통하여 표면의 모든 결합상태를 확인할 수 있었고 그 상대적인 양까지도 얻어낼 수 있었다. 식각된 Cu의 표면에는 Cu-Cu, 2Cu-O, Cu-Ci, Cu-2(OH), 및 Cu-2Cl의 결합상태가 존재함을 알 수 있었고, CuLMMAuger line spectrum의 관찰을 통하여 계산된 각 결합의 정량적인 비교를 검증할 수 있었다. 따라서 chemical shift가 거의 관찰되지 않아 결합상태 분리가 불가능한 식각된 구리표면의 정량적 결합상태는 각 결합상태의 상대적 비교를 통하여 얻어질 수 있음을 알 수 있었다.

• Journal of the Korean Vacuum Society
• /
• v.3 no.3
• /
• pp.355-359
• /
• 1994

Cd1-xCoxIn2Se4(X=0.50) 결정을 수직 Bridgman 방법으로 성장시키고 성장된 결정의 결정구조 및 XPS 특성을 연구하였다. 성장된 결정은 pseudocubic 구조이고 격자상수는 a=5.778$\AA$으로 주어졌다. Cd1-xCoxIn2Se4 결정의 각 성분원소인 cadmium cobalt indium 그리고 selenium에 대한 XPS spectrum으 로부터 결합에너지와 결합상태를 조사하였다. Cd1-xCoxIn2Se4결정과 결합하지 안는 각 성분원소인 cadium cobalt imdium 그리고 selenium에 대한 core level의 XPS spectrum과 비교하면 각 성분원소상 이의 결합에 의한 chemical shift 현상 때문에 core level의 결합에너지가 0.10~4.87 eV 차이가 있다. Cd1-xCoxIn2Se4 결정에서 Co 2P3/2 core level의 주 peak와 statellite peak와의 결합에너지 차이로부터 cadmium과 치화된 cobalt는 Co2+ ion으로 Td symmetry 점에 위치함을 알 수 있다.

• Information Systems Review
• /
• v.13 no.3
• /
• pp.123-139
• /
• 2011

This paper researches the value of domestic telecommunication bundle products. Customers evaluate each telecommunication products differently according to their attributes. The attributes affecting the customer value of telecommunication bundling can be categorized in 3 ones as follows; corporate image, service feature, and service price. Also authors analyze the difference of importancy that customers consider when they evaluate each products, and propose the optimal scenario for bundling. In conclusion, other two companies A, C excluding B should invest more resources into the portion that strengthen the attributes of company image, and service feature to upgrade their 'corporate image', and 'service feature'. According to 6-scenarios analysis on the bundle products, the QPS expansion of company A was the most advantageous position, but if companies B, C expand DPS made use of their strengths, they can prevent from decreasing additivity rapidly with sequential scenario. The above results show that one company may have equable power in each area, but if another company having strengths in special areas makes up for its weakness and differentiates gradually it can contribute to strengthen its competitiveness. This contributed much more theoretical and practical than the existing researches. Supposing that additivity index evaluated by consumers can be changed by efforts of companies, this scenario planning is the result of study showing that the investment and publicity of each company have to be considered as its characteristic of each product at the same time.

• Korean Journal of Optics and Photonics
• /
• v.10 no.2
• /
• pp.120-127
• /
• 1999

We discussed two main types-conformal and non-conformal (powered) - of holographic combiner. A theoretical model based on the Kogelnik's coupled wave theory was used to illustrate bandwidth and efficiency properties. Also we showed numerical values for the aberrations that are induced by a wavelength shift from construction to reconstruction and found optimum coordinates to reduce the chrolatic aberation of construction beams using aberration balancing techniques. The holographic combiner manufactured in conformal type with 60$^{\circ}$ incidence angle at 514.5 nm had narrow angular bandwidth (FWHM) of 4.1" and spectral bandwidth of 11.4 nm, while non-conformal one with 50$^{\circ}$, 30$^{\circ}$ incidence angle at 514.5 nm showed spectral and angular bandwidth of 10.7 nm and 5.5$^{\circ}$, respectively.vely.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.93-99
• /
• 1998

A novel four-channel narrowband wavelength demultiplexer using integrated four vertical directional coupler structures is proposed and theoretically investigated. Four ridge waveguide with different ridge width are vertically coupled to a strip-loaded waveguide which results four different wavelengths filtered out to each ridge waveguide. In order to reduce the side-lobes, the coupling coefficients are varied along the propagation direction. The spectral responses of channels were found to be quite uniform. An average channel spacing of 7 nm with power coupling efficiency of ~90%, 3-dB passband width of 2 nm, and 20 dB side-lobe suppression ratio was achieved.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.54-62
• /
• 1998

The crosstalks of two-waveguide & three-waveguide directional couplers are analyzed. Advantages and disadvantages for each coupler are compared and discussed. Based on the relationship between the coupled mode and the normal mode, the mathematical expressions are derived in terms of the crosstalks for each directional coupler. Numerical techniques such as the finite-difference method and the beam propagation method are employed to testify the validity of the derived equations. The calculation results show that two-waveguide directional coupler is superior to any types of three-waveguide couplers from the practical viewpoint of the crosstalk and the coupling length.

• Journal of the Korean Chemical Society
• /
• v.37 no.9
• /
• pp.787-792
• /
• 1993

Semiempirical MNDO calculations are employed to study relation properties on bridging OH group with Al-O(P-O) bond length and Al-O-P bond angle of structural characteristics using birdging $(OH)_3AlOP(OH)_3$ and $(OH)_3AlOHP(OH)_3^+$ model culster. We know that the O-H bond dissociation energy of bridging OH group is increased with increasing Al-O(P-O) bond length and decreasing Al-O-P bond angle. The bridging OH group is formed into enlarged Al-O(P-O) bond length and shortened Al-O-P bond angle in bridging oxygen atom by a hydrogen migration. The negative net charge of bridging oxygen atom is increased with longer Al-O-P bond angle, while the positive net charge is decreased with longer Al-O-P bond angle.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.37-42
• /
• 2013

In this paper, we propose a compensation method of a non-ideal antenna array and a computationally efficient estimation method of the direction of arrival (DOA) for the antenna array. For DOA estimation, an antenna array is essential. By using the phase difference between the output signals of antennas, we can derive the DOA. In practice, however, mutual coupling between the elements of an antenna array change the beam pattern of each element and degrade the performance of DOA estimation. In the proposed method, we first estimate the DOA for the mid-subarray of the array, where all elements undergo relatively same coupling effect. We use the estimation of signal parameters via rotational invariance techniques (ESPRIT) algorithm to estimate the DOA. Then, we expand the array based on the estimated DOA by compensating the coupling effect. Simulation results show that the proposed method is effective when jamming to noise power ratio (JNR)is relative low.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.38-45
• /
• 2005

This research was investigated on the increase in strength capacity among different five wood-to-wood connections. Group using small diameter bolts with equal area loss has the highest increase in strength capacity, secondly the group inserted plywood, thirdly the group used glued bolt, and lastly the group inserted rubber plate. These groups showed at least 10% increase in strength capacity more than existing connection groups. Therefore, these results can be applied to develop the new highly efficient connection. To select suitable connection configuration and materials, however, economical advantage and increase in strength capacity and the difficulty should be considered by the additional works.