• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.22-30
• /
• 2009

Due to high levels of integration and complexity, the Network-on-Chip (NoC) approach has emerged as a new design paradigm to overcome on-chip communication issues and data bandwidth limits in conventional SoC(System-on-Chip) design. In particular, exponentially growing of energy consumption caused by high frequency, synchronization and distributing a single global clock signal throughout the chip have become major design bottlenecks. To deal with these issues, a globally asynchronous, locally synchronous (GALS) design combined with low power techniques is considered. Such a design style fits nicely with the concept of voltage-frequency-islands (VFI) which has been recently introduced for achieving fine-grain system-level power management. In this paper, we propose an efficient design methodology that minimizes energy consumption by VFI partitioning on an NoC architecture as well as assigning supply and threshold voltage levels to each VFI. The proposed algorithm which find VFI and appropriate core (or processing element) supply voltage consists of traffic-aware core graph partitioning, communication contention delay-aware tile mapping, power variation-aware core dynamic voltage scaling (DVS), power efficient VFI merging and voltage update on the VFIs Simulation results show that average 10.3% improvement in energy consumption compared to other existing works.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.4-4
• /
• 2000

일반적인 액체추진제 로켓엔진의 연소는 분사제트의 미립화, 액적의 증발, 기상 추진제의 혼합, 화학반응 등, 일련의 물리적 과정들로 이루어지고, 여기서 특성속도 효율은 크게 분사특성 및 연소의 두 단계에서 결정되게 된다. 액체추진제 로켓엔진에 사용되는 여러 분무형태 중, 동축형 분사기에서는 액상과 기상 제트의 운동량 차에 의해 미립화가 이루어지며, 분무 액적들의 전개와 더불어 분사기 출구를 포함한 전 영역에서 연소가 발생되므로 매우 복잡한 물리적 특성들을 포함하게 된다. 본 연구에서는 기상 연료-액상 산화제의 동축형 분무연소를 JANNAF의 방법을 사용하여 수식화 하였으며, 이를 바탕으로 분무특성과 연소성능 예측을 위한 프로그램을 작성, 분사조건에 의한 분무특성과 그에 따른 연소성능을 계산하였다. 연속, 운동량, 에너지 및 혼합비 방정식의 지배방정식들을 바탕으로 기상 유동을 수식화 하였으며, 별도로 액적의 소산 및 연소과정을 모사하기 위한 별도의 수식들이 추가되었고, 이 식들을 결합하여 액적의 크기, 분포를 포함하는 액체 제트의 미립화 정도를 공간적으로 계산하였다. 미립화 모델의 검증을 위하여 계산 결과를 Reitz의 실험과 Giridharan의 모델 등과 비교하였으며 잘 일치하는 경향을 나타내었다. 또한 동축형 분사기에서의 분무 특성을 예측하기 위해 액체 산소, 기체 수소를 추진제 조합으로 하는 동축형 분무 연소장에서의 제트 길이, 액적의 크기, 액체 제트의 속도를 계산하였다. 계산 결과 액체 제트의 접촉길이는 분사공의 지름이 증가할수록 웨버수가 증가되므로 짧아지는 것으로 관찰되었으며 액적의 크기도 분사공의 지름이 증가할수록 작아지는 경향을 나타내었다. 액체 제트의 속도는 처음에는 일정하게 유지되다가 운동량을 보존하기 위해 가스로부터 운동량을 받아 점차 가속되어지는 것으로 나타났다.본 규격은 키, 총장, 어깨길이, 등길이, 머리길이, 머리둘레, 진동둘레, 목둘레, 가슴둘레, 허리둘레, 배둘레, 엉덩이둘레, 앞품, 뒤품, drop치를 포함하고 있고, 각 규격에서 호칭간 치수 간격도 함께 제시하고 있다. 본 연구 결과에서 보듯, 현행 8규격의 무진복의 각 호칭간 적정 허용범위를 고려해 합리적인 치수체계를 정립한다면 치수에 대한 적합도가 상당히 증가할 뿐 아니라 생산비용도 상당히 감축할 것으로 생각된다.나타났다. 4) 호감적 서비스능력 차원에서 세 독립변수간에 유의한 3원 상호작용이 존재하는 것으로 나타나( $F_{2,228}$=15.62, P<.001) 20대에 적합한 의복 착용시( $F_{2,228}$=3.98, P<.05)와 60대에 적합한 의복 착용시( $F_{2,228}$=16.55, P<.001) 점포유형과 격식차림간에는 유의한 상호작용이 존재하는 것으로 나타났다. 5) 호감을 구성하는 세 요인들이 구매의도에 미치는 영향을 조사한 결과 호감적 인상차원은 29%(P<.001), 호감적 서비스능력차원은 6%(P<.001)의 구매의도를 설명해 주는 것으로 나타났다. 본 연구결과 노년 소비자에게 호감을 주는 판매원의 외모는 구매의도에 영향을 주어 실버의류산업의 이익증대와 밀접한 연관을 갖는 서비스품질의 중요한 요인으로 밝혀졌다.중요한 요인으로 밝혀졌다.로운 단백질 EPSPS가 다른 여러 식물에 이미 존재하고 있는 단백질로서 우리가 이미 이러한 식품을 섭취할 때 이 단백질도 같이 섭취해오고 있었다는 점, 둘째. 이 단백질이 소화액 분해 실험에서 짧은 시간내에 분해가 되었다는 점, 셋째. 재조합 된 콩과 자연 콩이 성분 분석에서 차이를 나타내지 않았다는 점, 네 번째. 쥐를 통한 다양섭취 실험에서 아무런 이상 반응이 없었

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.2
• /
• pp.109-120
• /
• 2004

INTRODUCTION: The build-up method has been used for application of porcelain powder on the metal framework to make final tooth shape conventionally. This method takes time and need skill to mimic final shade and shape of porcelain fused to metal crown. The purpose of this study was to develop standard shape and shade laminating porcelain forms to reduce build-up time. METHODS: To make tooth form porcelain paste, several liquid organic compounds were added to conventional feldspathic porcelain. The amount of additives and rheologic property were tested to find out best composition. Comparison of mixing methods to reduced porosity, proper heating schedule, and measurement of shrinkage amount and residual organic materials were performed to set-up standard procedures. Finally, biaxial flexural strength and color of preformed laminated paste porcelain were compared with those of porcelain which fabricated by the conventional build-up method. RESULTS: There was no significant difference in physical properties and color stability between two fabrication methods after various testing methods. Conclusion: This new build-up method can be applied to fabricate the PFM crown and bridge without any loss of strength and optical properties.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.224-232
• /
• 1999

Latent heat storage system using micro-encapsuled phase change material is effective method for floor heating of house and building. The temperature profile in capsule block and flow rate of hot water are important parameters for the development of heat storage system. In the present study, a mathematical model based on 3-D, non-steady state, Navier-Stokes equations, scalar conservation equations and turbulence model ($\kappa$-$\varepsilon$), is used to predict the temperature profiles in capsule and the velocity vectors in hot water pipe. The multi-block grids and fine grids embedding are used to join the circle in hot water pipe and square in capsule block. The phase change process of the capsule is quite complex not only because the size of phase change material is very small, but also because phase change material is mixed with the cement to form thermal storage block. In calculation, it's assumed that the phenomena of phase change is limited only the thermal properties of phase change material and the change of boundary is not happened in capsule. The purpose of this study is to calculate the temperature profiles in capsule block and velocity vectors in hot water pipe using the numerical calculation. Two kinds of thermal boundary condition were considered, the first (case 1) is the adiabatic condition for the both outside surfaces of the wall, the second (case 2) is the case in which one surface is natural convection with atmosphere and another surface is adaibatic. Calculation results are shown that the temperature profile in capsule block for case 1 is higher than that for case 2 due to less heat loss in adaibatic surface. Specially, in the domain of near Y=0, the difference of temperature is greater in case 1 than in case 2. The detailed experimental data of capsule block on the temperature profile and the thermal properties such as specific heat and coefficient of heat transfer with the various temperature are required to predict more exact phenomena of heat transfer.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.6
• /
• pp.213-222
• /
• 1998

Covering polmer mortar as a filter for permeable polymer concrete on the base polymer concrete is nessary for good permeability from infiltration continuously. Therefore, three covering polymer mortars on the optimum base polymer concrete were cast immediatly following on the casting of the base polymer concrete. They are tested for compressive and flexural strengths, adhesion in tension, hardening shrinkage and permeability, and the effects of the mix proportioning factors on the properties of the permeable polymer concrete are discussed. From the test results, increase in the compressive strength and decrease in the coeffiecient of permeability of base polymer concrete are clearly obserbed with increasing filler-binder ratio. The base polymer concretes having a compressive strength of 9.4~28.3MPa and a coefficient of permeability of 0.12~1.93 cm/s can be produced in the consideration of the mix proportioning factors. Binder and filler contents in mix proportions had a great influence on the permeability of polymer concretes. The mechanical properties of permeable polymer concretes covered with polymer mortar using crushed stone are superior to other filters, and hardening shrinkage is the smallest in filters. It is apparent that adhesion between the base polymer concrete and polymer mortar is affected by the degree of hardening shrinkage. From this study, proper mix proportions can be recommended in the consideration of properties of the permeable polymer concrete.

• Microbiology and Biotechnology Letters
• /
• v.33 no.4
• /
• pp.267-273
• /
• 2005

To develop effective and powerful probiotic, Saccharomyces cerevisiae strains producing cellulolytic enzymes were genetically brooded. For the production of exoglucanase, the plasmid pVT-TExo (8.8 kb) was constructed, in which Thermomonosporafusca exoglucanase gene (E3) was under the control of ADHl promoter, and introduced into S. cerevisiae SEY2102. When the transformant, S. cerevisiae SEY2102/pVT-TExo, was cultivated on YPD medium, the total expression level of avicelase reached about 190 unit/l. The secretion efficiency and plasmid stability were about $50\%\;and\;91\%$, respectively. Recombination exoglucanase enzyme bound to avicel better than Clostridium endoglucanase (CelA) and Trichoderma endoglucanase (C4) enzymes. The mixing ratio of E3 and CelA displaying the best synergistic hydrolysis for avicel was observed at 4:1. The mixture of endoglucanase (CelA) and exoglucanase (E3) resulted in 3.2-fold increase of avicelase activity and 2.5-fold enhanced production of sugar production from avicel, compared to the single enzyme treatment.

• Journal of Conservation Science
• /
• v.19
• /
• pp.67-72
• /
• 2006

The chemical compositions and lead isotope ratio of Poong-Tag(wind bell) bell excavated from Wanggyeong site, Gyeongju have analyzed by ICP and TIMS. The analysis result of chemical composition of Poong-Tag shows that it consists of 92:4 ratio of Cu:Sn. Other 8 minor elements(Pb, Zn, Fe, Ag, Ni, As, Sb and Co) show the concentration of below 0.2% respectively. This result means that Poong-Tag have made using highly purified Cu and Sn ore. For the study of provenance of raw material with the lead isotope ratio, the origin of the raw material of Poong-Tag can not be presumed owing to beyond the scope. The observation result of microstructure of Poong-Tag show the dendrite structure made through casting process. The chemical composition, microstructure, and lead isotope ratio of Poong-Tag excavated from Wanggyeong site, Gyeongju can be used as fundamental data to compare with other Poong-Tag of different regions and periods.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.141-154
• /
• 2016

The gilt-bronze decorated bamboo mudguards with heavenly horse design excavated in 1973 at Cheonma Tomb of Shilla are the unprecedented relics in Korean history as it has its original structure. Although the bamboo mudguards were excavated in not only Cheonma Tomb, but also in Geumgwanchong and Geumryeongchong, all of them remains into pieces. In addition, there are no exact data related with its structure and manufacturing technique. The report deals with the manufacturing technique of the bamboo mudguards with heavenly horse design excavated in Cheonma Tomb through the naked eye's observation, X-Ray Fluorescence, and Transmission X-rays analysis etc. Bamboo mudguards basically have the three divided structure with central-focus structure of a radiation style. And the mudguards consists of Bratticing gilt-bronze, fabric, and bamboo plates together, as ornamental fringe of 4 plates. The surface of the gilt bronze plates was decorated with a variety of workmanship and pendant. Bamboo plates have a waved pattern by using about three hundred bamboo bark. Two types of textiles were mainly found in the textile plates, and the leather were partially found. In order to combine all plates together, gilt-bronze bottonhead, pendant decoration, and ornamental fringe were used. It would be helpful to study bamboo mudguards during 5th-6th centuries in Shilla period and basis investigations of Geumgwanchong and Geumryeongchong excavations.

• Korean Journal of Food Science and Technology
• /
• v.48 no.4
• /
• pp.341-346
• /
• 2016

The AMY2B gene, encoding human pancreatic ${\alpha}$-amylase isozyme (HPA II), was expressed in Pichia pastoris, and the effects of chloride ions on HPA II activity toward starch substrates were investigated. As seen with chloride ion-dependent ${\alpha}$-amylases-including HPA I, the isozyme of HPA II-chloride ions increased enzyme activity and shifted the optimal pH to an alkaline pH. The activity enhancement by chloride was more significant at pH 8 than that at pH 6, suggesting that the protonation state of the general acid/base catalyst of HPA II was important for the hydrolysis of starches at an alkaline pH because of the increase in its $pK_a$ by chloride ions. The turnover values for cereal starches as the substrates markedly increased in the presence of chloride by up to 7.2-fold, whereas that for soluble starch increased by only 1.7-fold. Chloride inhibited substrate hydrolysis at high substrate concentrations, with $K_i$ values ranging from 6 to 15 mg/mL.

• Korean Journal of Psychosomatic Medicine
• /
• v.2 no.1
• /
• pp.69-79
• /
• 1994

The authors investigated the relationship between the response to the external stimulation and ability of verbal behavior in the patients with somatoform disorder who have pain. The subjects consisted of 34 patients(male 10, female 24) and 37 normal controls(male 19, female 18). Pressure pain thesholds were measured by algometer and alexithymia was assessed by Toronto Alexithymia Scale(TAS). Somatization Scale of SCL-90R and Parental Bonding Instrument were also used. It was shown that 82.4% of the patients had chronic somatic complaints. The mean values of TAS, degree of somatic symptoms and pressure pain thresholds were significantly higher in the patient group than in the normal controls. 44.1% of the patients was considered alexithymia group and there was no correlation between scores of alexithymia and value of pressure pain thresholds. In conclusion, the patients with somatoform disorder who had pain were dull in pain perception to external physical stimulation. This result suggested that their low perception of pain could be closely related with chronicity of illness. And the Poverty of verbal expression of inner emotion was suggested to be one of the factors affecting somatization and difficulty in psychotherapy.