• Archives of design research
• /
• v.13 no.1
• /
• pp.209-218
• /
• 2000

The purpose of this study was to improve the curriculum for industrial design department in the junior colleges. In order to achieve the purpose, two methodologies were carried out. First is job analysis of the industrial designers who have worked in the small & medium manufacturing companies, second is survey for the opinions of professors in the junior colleges. Some results were as follows: 1. The period of junior college for industrial designers is 2 years according to present. But selectively 1 year of advanced course can be established. 2. The practice subjects same as computational formative techniques needed to product development have to be increased. In addition kinds of selection subjects same as foreign language, manufacturing process, new product information and consumer behavior investigation have to be extended. 3. The next subjects need to adjust the title, contents and hours. (1) The need of 3.D related subjects same as computer modeling, computer rendering, 3.D modeling was high. The use of computer is required to design presentation subjects. (2)The need of advertising and sale related subjects same as printing, merchandise, package, typography, photography was low, the need of presentation techniques of new product development was high. (3) The need of field practice, special lecture on practice and reading original texts related subjects was same as at present, but these are not attached importance to form. As the designers feel keenly the necessity of using foreign language, the need of language subject was high.

• Journal of the Korean earth science society
• /
• v.43 no.3
• /
• pp.405-429
• /
• 2022

Detrital zircon LA-MC-ICP-MS U-Pb dating of the Cretaceous Gurye Group, Gurye Basin, was carried out. Gurye Group consists of Supyeongri, Geumjeongri, Togeum, and Obongsan formations in ascending order, and five samples were collected for age dating. Based on the dating results, the lowermost Supyeongri and the uppermost Obongsan formations show narrow age ranges. Only Precambrian and Late Cretaceous zircons were found in the Supyeongri and Obongsan formations, respectively. However, the upper and lower Geumjeongri, and Togeum formations show wide age ranges from the Precambrian to Cretaceous. The youngest detrital zircon U-Pb ages of each formation except the Supyeongri Formation, which lacks Cretaceous zircon, were calculated to be ca. 107.4 Ma in the lower Geumjeongri Formation, ca. 104.6 Ma in the upper Geumjeongri Formation, ca. 97.7 Ma in the Togeum Formation, and ca. 88.5 Ma in the Obongsan Formation. Such results indicate that the depositional age of the Gurye Group can be constrained from the Lower Cretaceous Albian to the Upper Cretaceous Coniacian. Based on the distribution of the detrital zircon ages from each formation, the source area of the Gurye Group is interpreted to have been extended from the adjacent Youngnam Massif to the Okcheon Belt throughout the basin evolution. The increase of the Cretaceous zircon with time is thought to reflect the slab roll-back of the proto-Pacific plate during the Cretaceous.

• Composites Research
• /
• v.34 no.1
• /
• pp.35-46
• /
• 2021

This paper aims to reduce weight by replacing the reinforcements of the B-pillar used in vehicles with CFRP(Carbon Fiber Reinforced Plastics) and GFRP(Glass Fiber Reinforced Plastics) from the existing steel materials. For this, it is necessary to secure structural stability that can replace the existing B-pillar while reducing the weight. Existing B-pillar are composed of steel reinforcements of various shapes, including a steel outer. Among these steel reinforcements, two steel reinforcements are to be replaced with composite materials. Each steel reinforcement is manufactured separately and bonded to the B-pillar outer by welding. However, the composite reinforcements presented in this paper are manufactured at once through compression and injection processes using patch-type CFRP and rib-structured GFRP. CFRP is attached to the high-strength part of the B-pillar to resist side loads, and the GFRP ribs are designed to resist torsion and side loads through a topology optimization technique. Through structural analysis, the designed composite B-pillar was compared with the existing B-pillar, and the weight reduction ratio was calculated.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.257-267
• /
• 2001

This paper presents a design for a single-layer feeder waveguide array using $\pi$-junctions with the inductive wall. The feed structure consists of a single waveguide placed on the same layer as radiating waveguide and is characterized by the unit divider, called a $\pi$-junction. This $\pi$-junction with an inductive wall splits part of the power into two branchs waveguide through one coupling window, and can excite densely arrayed waveguide at equal phase and amplitude. The power dividing characteristics of the cascade of $\pi$ -junctions are analyzed by Galerkin's method of moments. The numerical results show reasonable agreement with the experimental results. From the optimum simulation results based on the feeder waveguide using $\pi$-junction, we obtained the scattering matrices of the feeder divided power at 3.95 GHz.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1016-1021
• /
• 2011

The enhancement for cooling performance of heat sink is surely necessary to guarantee the performance of electronic products. So in this paper, the cooling performances of the aluminum heat sink with pulsating heat pipe(PHP) were investigated experimentally and numerically. The pulsating heat pipe was used as a heat spreader. Working fluid of PHP was R-22. Heat inputs were 30W, 60W, 80W and 100W, respectively. Heat sink was tested for forced convection conditions with air velocity of 1 ~ 4m/s. And CFD simulations were conducted for two different heat sinks. The results showed that the cooling performance of heat sink with pulsating heat pipe was higher than that of conventional heat sink. Therefore, the pulsating heat pipe can be a good tool to improve cooling performance of heat sink.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.6
• /
• pp.637-647
• /
• 2014

In pressurized water reactors, the upper head of the reactor pressure vessel (RPV) contains numerous control rod drive mechanism (CRDM) nozzles. These nozzles are fabricated by welding after being inserted into the RPV head with a room temperature shrink fit. The tensile residual stresses caused by this welding are a major factor in primary water stress corrosion cracking (PWSCC). Over the last 15 years, the incidences of cracking in alloy 600 CRDM nozzles have increased significantly. These cracks are caused by PWSCC and have been shown to be driven by the welding residual stresses and operational stresses in the weld region. Various measures are being sought to overcome these problems. The defects resulting from the welding process are often the cause of PWSCC acceleration. Therefore, any weld defects found in the RPV manufacturing process are immediately repaired by repair welding. Detailed finite-element simulations for the Korea Nuclear Reactor Pressure Vessel were conducted in order to predict the magnitudes of the repair weld residual stresses in the tube materials.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.4
• /
• pp.363-372
• /
• 2012

In this study, a new information-based hybrid modeling framework is proposed. In the hybrid framework, a conventional mathematical model is complemented by the informational methods. The basic premise of the proposed hybrid methodology is that not all features of system response are amenable to mathematical modeling, hence considering informational alternatives. This may be because (i) the underlying theory is not available or not sufficiently developed, or (ii) the existing theory is too complex and therefore not suitable for modeling within building frame analysis. The role of informational methods is to model aspects that the mathematical model leaves out. Autoprogressive algorithm and self-learning simulation extract the missing aspects from a system response. In a hybrid framework, experimental data is an integral part of modeling, rather than being used strictly for validation processes. The potential of the hybrid methodology is illustrated through modeling complex hysteretic behavior of beam-to-column connections.

• Economic and Environmental Geology
• /
• v.38 no.4 s.173
• /
• pp.421-434
• /
• 2005

Abstract Based onthe characteristics of Carlin-type gold deposit in Nevada district, a potential in Korea is evaluated to the Yemi area where is structurally controlled by folds and trust fault. The fault of high angles are combined with a more permeable rocks such as the Yemi breccia and laminated silty limestone. The pattern of enrichment factors for Tl, Sb, As, Ag, Pb, Zn, Cu, Mo and W of limestones in the southern area are geochemically similar with those reported from the Carlin-type Bold deposit. Moreover, the oxygen and carbon isotopes show a hydrothermal alteration is widely developed in this area. According to the result of geophysical interpretation, stable isotope, alteration mineralogy, geochemical study, and geological structure, this mineralized zone may be extended to the M direction, so a detailed systematic exploration is required to identify this alteration zone.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.1
• /
• pp.40-48
• /
• 2016

Micro-vibration induced by on-board appendages that have mechanical moving parts has always been treated as an useless objective that has to be isolated, in order to comply with a high-resolution mission requirement of the observation satellite. In this study, we proposed a tuned mass damper energy harvester combined with a conventional passive vibration isolator for exhibiting dual functions of both electrical energy harvesting and micro-vibration isolation. The feasibility of the proposed dual-function complex system has been demonstrated through the comparison with numerical simulations, based on the results of basic characteristic tests, and experiments of the harvested power and micro-vibration.

• Composites Research
• /
• v.34 no.1
• /
• pp.47-50
• /
• 2021

In this paper, the Curing process for Epoxy Molding Compound (EMC) Package was developed by comparing the performance of the EMC/Cu Bi-layer package manufactured by the conventional Hot Press process system and Carbon Nanotubes (CNT) Heater process system of the surface heating system. The viscosity of EMC was measured by using a rheometer for the curing cycle of the CNT Heater. In the EMC/Cu Bi-layer Package manufactured through the two process methods by mentioned above, the voids inside the EMC was analyzed using an optical microscope. In addition, the interfacial void and warpage of the EMC/Cu Bi-layer Package were analyzed through C-Scanning Acoustic Microscope and 3D-Digital Image Correlation. According to these experimental results, it was confirmed that there was neither void in the EMC interior nor difference in the warpage at room temperature, the zero-warpage temperature and the change in warpage.