• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.207-212
• /
• 1996

We propose an extended additional layer method (EALM) of calculating the coupling coefficient of arbitrary shaped diffraction gratings. In EALM, to determine the unperturbed field distribtution, a grating region is replaced by a new uniform layer whose dielectric constant is the average value of the dielectric constant of a grating region in both longitudinal and transverse directions. Using this method, we calculate the coupling coefficient for a five-layer distributed feedback structure device with trapezoidal and triangular gratings. The validity of this method is established by comparing the results calculated by partitioning the grating region up to five uniform layers.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.352-353
• /
• 2019

자기유도 무선전력 전송 (Inductive Power Transfer, IPT) 시스템에서 송 수신패드의 결합계수 k는 송신패드와 수신패드의 이격거리에 따라 가변된다. 송 수신패드의 결합계수에 따라 IPT 컨버터의 동작특성이 바뀌기 때문에, 일반적인 스위칭 주파수 제어 방법으로는 IPT 컨버터의 정상 동작 영역이 제한된다. 본 논문에서는 송 수신패드의 결합계수 계수에 따라 풀브릿지 구조의 IPT 컨버터 1차 측을 풀브릿지 또는 하프브릿지로 제어하여 동작 가능한 결합계수 범위를 확장할 수 있는 제어 방법을 제안하고, LCCL-S 구조의 IPT 컨버터에 적용하여 실험을 통하여 제어 방법의 타당성을 검증한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.10
• /
• pp.1019-1025
• /
• 1991

An analytic method of computation of the coupling coefficients between a microstripline and a die-lectric resonator is showen in this paper. The relationships among the substrate material, the ground plane, the diele-lents. The theoretically computed values of Qext are compared with the experimentally measured values of Qext in there is no dieletric spacer between them, As a result, the reflection coefficients with the dielectric spacer between the dieletric resonator and the substrate are decreased more than the reflection coefficients without the didlectric spacer between them.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1073-1078
• /
• 2012

This paper presented the extraction solution for the coupling coefficient at the magnetically coupled wireless power transmission(WPT) system through the analysis of its equivalent circuit considering the loss. The conventional extraction solution using coupled mode theory is generalized employing the extracted solution considering the load resistance. Consequently, the measuring process of extracting coupling coefficient becomes convenient since the even/odd mode analysis is not necessary. Furthermore, the coupling coefficient obtained from the induced extraction method was in excellent agreement with the coupling coefficient obtained using the ratio of magnetic flux passing through the two loops. The extraction of the accurate coupling coefficient at the magnetically coupled WPT is an essential work to analyze and optimize the WPT system.

• Korean Journal of Optics and Photonics
• /
• v.10 no.4
• /
• pp.348-353
• /
• 1999

Ray-optics approach based on the rigorous coupled wave theory, called by the rigorous ray-optics method (RROM), is developed for the calculation of couling coefficients of waveguide grating devices. The coupling coefficients of several grating structures, such as rectangular, sinusoidal, triangle, and trapezoidal shapes, are determined by the RROM, and they are compared with those obtained by conventional methods of the ray-optics method (ROM) and the coupled mode method (CMM). In the case of rectangular gratings, the coupling coefficients is evaluated in detail by various depths and duty-cycles of the grating. We have found that the RROM gives more exact solutions for the coupling coefficients of even arbitrary shapes of diffractive waveguide grating devices than the other conventional methods.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.116-117
• /
• 2019

본 논문은 수치 해석적 연산을 통해 자계결합형 무선전력전송 시스템의 자계결합계수의 연산 방법을 제안하였다. 한 변의 길이가 각각 20cm, 10cm인 정사각 루프타입 공진기 간의 자계 결합계수를 산출하고, 이를 시뮬레이션을 통해 추출된 값과 비교하여 제안된 연산 방법의 타당성을 검증하였다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.6
• /
• pp.90-95
• /
• 1997

In designing a resonant circuit of the inverter which puts induction heating with high frequency to the load, an inductance L of the circuit, the coupling coefficient of a transformer transfering the output power to load, and the coupling coefficient of load circuit heating with coil affect to the output power of a resonant circuit, the circuit Q and the frequency. Those characteristics of the circuit are analyzed through Thevenan's equivalent circuit of the coupling coefficient type which is derived from the T-type equivalent circuit of a transformer. On this equivalent circuit, the impedance of a transformer referred to its primary side is not only proportional the square of turn ratio, nZ, but also the square of coupling coefficient, K2 This paper proposed a more accurate fundamental method to design a resonant circuit of the inverter by using the Thevenan's equivalent circuit.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.417-422
• /
• 2023

This paper presents various methods for implementing 3-dB coupler using a broadside slot coupled lines and analyze its characteristics. The ideal coupler of the tandem structure is analyzed on the premise that both the reflection coefficient and the isolation coefficient of the first and second coupler connections are zero. However, since the reflection and isolation coefficients of most couplers are not zero, the S-parameter cascade calculation method was used to check how to the characteristics of the coupler change due to this. In order to confirm that these characteristics appear, a 3-dB coupler was fabricated with one stage and two and three stages of a tandem structure using a broadside slot coupled lines at a center frequency of 2 GHz, and it was confirm that the characteristics of tandem coupler change due to the non-zero reflection coefficient and isolation coefficient of the connection part of the coupler.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.194-197
• /
• 2001

본 논문에서는 결합창으로 결합을 구현한 유전체 공진기 필터의 결합창 특성을 해석하였다. 결합창의 특성을 결합계수로 표현하였으며, 간단한 표현식으로 유도하였다. 결합창의 크기를 변화시키면서 해석 방법을 적용하여 결합계수를 계산하였고, 측정결과와 비교하여 해석의 유효성을 증명하였다. 본 논문에서 제안한 방법은 적용이 간단할 뿐 아니라, 결합창의 제작 및 측정오차 범위에서 정확한 결과를 보였다. 본 논문에서 제안한 방법은 유전체 공진기 필터의 설계 및 유전체 공진기와 Varactor diode로 이루어지는 동조필터가 동조주파수 대역에서 일정한 통과대역폭을 가지기 위한 최적화된 결합창의 설계적용이 가능하다.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.135-136
• /
• 2013

본 논문에서는 결합 인덕터를 이용한 풍력/태양광용 컨버터를 제안한다. 입력의 전류리플을 최대로 감소할 수 있도록 최적화된 결합계수를 선정하였고 인덕터의 결합계수를 조절하기 위한 코어의 구조뿐만 아니라 공극의 길이, 턴 수를 조절하여 결합 인덕터의 설계와 제작을 수행하였다. 본 논문의 풍력과 태양광용 컨버터에 있어서 각각의 인덕터 2개를 적용하는 것과 단일의 결합 인덕터를 적용 하는 것에 대해 비교검증의 실험을 수행하였다. 또한 결합계수의 변화에 따라 입력 전류의 리플이 최소화되는 값을 실험을 통해 확인하고 타당성을 입증하였다.