• Journal of Food Hygiene and Safety
• /
• v.20 no.4
• /
• pp.258-266
• /
• 2005

Licorice Extract and Erythritol, food additives used in korea, are widely used in foods as sweetener. Its application for use in food is regulated by the standard and specification for food additives but official analytical method far determination of these sweetener in food has not been established. Accordingly, we has been carried out to set up analytical method of the glycyrrhizic acid in several foods by the way of thin layer chromatography and high performance liquid chromatography glycyrrhizic acid is qualitative anaylsis technique consists of clean-up with a sep-pak $C_{18}$ cartridge, separation of the sweeteners by Silica gel 60 F254 TLC plate using 1-butanol:4Nammonia solution:ethanol (50:20:10) as mobile solvent. Also, the quantitative analysis for glycyrrhizic acid, was performed using Capcell prk $C_{18}$ column at wavelength 254nm and DW:Acetonitrile (62:38 (pH2.5)) as mobile phase. and we has been carried out to set up analytical method of the erythritol in several foods by the way of high performance liquid chromatography. erythritol is qualitative anaylsis technique consists of clean-up with a DW and hexane. The quantitative analysis for erythritol, was performed using Asahipak NH2P-50 column, Rl and DW:Acetonitrile (25:75) as mobile phase. The glycyrrhizic acid results determined as glycyrrhizic acid in 105 items were as follows; N.D$\∼$48.7ppm for 18 items in soy sauce, N.D$\∼$5.3ppm for 12 items in sauce, N.D$\∼$988.93ppm for 15 items in health food, N.D$\∼$180.7ppm for 26 items in beverages, N.D$\∼$2.6ppm for 8 items in alcoholic beverages repectively and ND for 63 items in the ethers. The erythritol results determined as erythritol in 52 items were as follows; N.D$\∼$155.6ppm for 13 items in gm, N.D$\∼$398.1ppm for 12 items in health foods repectively and ND for 45 items in the others.

• Korean Journal of Agricultural Science
• /
• v.6 no.2
• /
• pp.166-184
• /
• 1979

In order to prevent the water loss in the irrigation canal constructed on the sandy gravel layer or on the other highly permeable ground layer, lining has been practiced. Many studies have been done so far on the lining method to prevent the water loss in the irrigation canal and recently studies on the lining with plastic film or polyethylene film were also reported. However, the plastic film or polyethylene film has low strength and is liable to break, and water loss from pin hole caused by contacting with sand or gravel is highly predicted. This study was then conducted to find proper lining and buring method in canal construction of polypropylene mat after coated with vinyl, as one way to overcome the shortcoming frequently observed when plastic or usual polyehtylene film were used. Eventhough rather longer periods of experiments are needed to attain reliable and accurate results on the variation of durability, the durability of asphalt coated area, or on the damage due to freeze after burial or exposure of polypropylene mat, the experiemental results obtained during one year of period are summarized as follows: 1. The curvature at the area between canal bottom and side slope had increased stability and saved consruction cost. The relationship among the variation of curvature, the reduction of polypropylene mat and the reduced amount of soil cutting at each side slope was presented in Fig. 7 through 9. 2. The depth of covering material to protect polypropylene mat was desired to be over 30cm, considering the water depth, side slope, canal cleaning practices, traffic, or back pressure of irrigation period. 3. In order to increase the canal stability and to prevent slope erosion, sandy soil was required, to be placed under ground, and coarse gravel should cover the surface area of canal. 4. The studies on the stability of side slope in the canal should consider the passive area on the bottom and the slope should be about 1 to 2, considering the slope stability, allowable velocity and tractive force. 5. When compared with earth lining, the lining with polypropylene mat coated with vinyl was responsible to save 28% and 37% of canal lining cost, when the soil carrying distances were 500 and 700m. respectively. 6. The water interception was almost completely attained when the polypropylene mat coated with vinyl was used for lining. But further studies were assumed to be necessary for the use of asphalt since the strength of polypropylene mat connected with asphalt will vary with duration.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.528-534
• /
• 2008

Purpose: Marginal fit is one of the important components for the successful prosthodontic restoration. Poor fitting margin of the restoration causes hypersensitivity, secondary caries, and plaque accumulation, which later result in prosthodontic failure. CAD/CAM zirconia all-ceramic restorations, such as $LAVA^{(R)}$ (3M ESPE, St.Paul, MN) and $EVEREST^{(R)}$ (KaVo Dental GmbH, Biberach, Germany) systems were recently introduced in Korea. It is clinically meaningful to evaluate the changes of the marginal fit of the CAD/CAM zirconia systems before and after build-up. The purposes of this study are to compare the marginal fit of the two CAD/CAM all-ceramic systems with that of the ceramometal restoration, before and after porcelain build-up Material and methods: A maxillary first premolar dentiform tooth was prepared with 2.0 mm occlusal reduction, 1.0 mm axial reduction, chamfer margin, and 6 degree taperness in the axial wall. The prepared dentiform die was duplicated into the metal abutment die. The metal die was placed in the dental study model, and the full arch impressions of the model were made. Twenty four copings of 3 groups which were $LAVA^{(R)}$, $EVEREST^{(R)}$, and ceramometal restorations were fabricated. Each coping was cemented on the metal die with color-mixed Fit-checker $II^{(R)}$ (GC Cor., Tokyo, Japan). The marginal opening of each coping was measured with $Microhiscope^{(R)}$ system (HIROX KH-1000 ING-Plus, Seoul, Korea. X300 magnification). After porcelain build-up, the marginal openings of $LAVA^{(R)}$, $EVEREST^{(R)}$,and ceramometal restorations were also evaluated in the same method. Statistical analysis was done with paired t-test and one-way ANOVA test. Results: In coping states, the mean marginal opening for $EVEREST^{(R)}$ restorations was $52.00{\pm}11.94\;{\mu}m$ for $LAVA^{(R)}$ restorations $56.97{\pm}10.00\;{\mu}m$, and for ceramometal restorations $97.38{\pm}18.54\;{\mu}m$. After porcelain build-up, the mean marginal opening for $EVEREST^{(R)}$ restorations was $61.69{\pm}19.33\;{\mu}m$, for $LAVA^{(R)}$ restorations $70.81{\pm}12.99\;{\mu}m$, and for ceramometal restorations $1115.25{\pm}23.86\;{\mu}m$. Conclusion: 1. $LAVA^{(R)}$ and $EVEREST^{(R)}$ restorations in comparison with ceramometal restorations showed better marginal fit, which had significant differences (P < 0.05) in coping state and also after porcelain build-up . 2. The mean marginal opening values between $LAVA^{(R)}$ and $EVEREST^{(R)}$ restorations did not showed significant differences after porcelain build-up as well as in coping state (P > .05). 3. $EVEREST^{(R)}$, $LAVA^{(R)}$ and ceramometal restorations showed a little increased marginal opening after porcelain build-up, but did not show any statistical significance (P > .05).

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.5
• /
• pp.736-745
• /
• 1996

Background : It is known that pulmonary rehabilitation improves dyspnea and exercise tolerance in patient with chronic lung disease, although it does not improve pulmonary function. But there is a controversy whether this improvement after pulmonary rehabilitation is due to increased aerobic exercise capacity. We performed this study to evaluate the effect of pulmonary rehabilitation for 6 weeks on the pulmonary function, gas exchange, exercise tolerance and aerobic exercise capacity in patients with chronic lung disease. Methods : Pulmonary rehabilitations including education, muscle strengthening exercise and symptom-Umited aerobic exercise for six weeks, were performed in fourteen patients with chronic lung disease (COPD 11, bronchiectasis 1, IPF 1, sarcoidosis 1 ; mean age $57{\pm}4$ years; male 12, female 2). Pre- and post-rehabilitaion pulmonary function and exercise capacity were compared. Results: 1) Before the rehabilitation, FVC, $FEV_1$ and $FEF_{25-75%}$ of the patients were $71.5{\pm}6.4%$. $40.6{\pm}3.4%$ and $19.3{\pm}3.8%$ of predicted value respectively. TLC, FRC and RV were $130.3{\pm}9.3%$, $157.3{\pm}13.2%$ and $211.1{\pm}23.9%$ predicted respectively. Diffusing capacity and MVV were $59.1{\pm}1.1%$ and $48.6{\pm}6.2%$. These pulmonary functions did not change after pulmonary rehabilitation. 2) In the incremental exercise test using bicycle ergometer, maximum work rale ($57.7{\pm}4.9$) watts vs. $64.8{\pm}6.0$ watts, P=0.036), maximum oxygen consumption ($0.81{\pm}0.07$ L/min vs. $0.96{\mu}0.08$ L/min, P=0.009) and anaerobic threshold ($0.60{\pm}0.06$ L/min vs. $0.76{\mu}0.06$ L/min, P=0.009) were significantly increased after pulmonary rehabilitation. There was no improvement in gas exchange after rehabilitation. 3) Exercise endurances of upper ($4.5{\pm}0.7$ joule vs. $14.8{\pm}2.4$ joule, P<0.001) and lower extremity ($25.4{\pm}5.7$ joule vs. $42.6{\pm}7.7$ joule, P<0.001), and 6 minute walking distance ($392{\pm}35$ meter vs. $459{\pm}33$ meter, P<0.001) were significantly increased after rehabilitation. Maximum inspiratory pressure was also increased after rehabilitation ($68.5{\pm}5.4$ $CmH_2O$ VS. $80.4{\pm}6.4$ $CmH_2O$, P<0.001). Conclusion: The pulmonary rehabilitation for 6 weeks can improve exercise performance in patients with chronic lung disease.

• 한국사회복지학회:학술대회논문집
• /
• 2003.10a
• /
• pp.185-216
• /
• 2003

This study was aimed at investigating important factors influencing career success among regular workers. The current researcher scrutinized the degree to which variables and factors affect the career success and occupational turnover rates of the research participants. At the same tune, two hypothetical path models established by the researcher were examined using linear multiple regression methods and the LISREL. After examining the differences among the factors of career success, a comparison was made between the disabled worker group and the non-disabled worker group. A questionnaire using the 5-point Likert scale was distributed to a group of 374 workers with disabilities and 463 workers without disabilities. For the data analysis purpose, the structural equation model, factor analysis, correlation analysis, and multiple regression analysis were carried out. The results of this study ran be summarized as follows. First, the results of factor analysis showed important categories of conceptual themes of career success. The initial conceptual factor model did not accord with the empirical one. A three-factorial model revealed categories of personal, family, and organizational factor respectively. The personal factor was composed of the self-esteem and self-efficiency. The family factor was consisted of the multi-roles stress and the number of children. Finally, the organizational factor was composed of the capacity for utilizing resources, networking, and the frequency of mentoring. In addition, the total 10 sub areas of career success were divided by two important aspects; the subjective career success and the objective career success. Second, both research participant groups seemed to be influenced by their occupational types. However, all predictive variables excluding the wage rate and the average length of work years had significant impact on job success for the disabled work group, while all the variables excluding the frequency of advice and length of working years had significant impact on job success for the non-disabled worker group. Third, the turnover rate was significantly influenced by the age and the experience of turnover of the research participants. However, the number of co-workers was the strongest predictive variable for the worker group with disabilities, but the occupation choice variable for the worker group without disabilities. For the disabled worker group, the turnover rate was differently influenced by the type of occupation, the length of working years, while multi-role stress and the average working years at the time of turnover for the worker group without disabilities. Fifth, as a result of verifying the hypothetical path model, it showed that the first model was somewhat proper and could predict the career success on both research participant groups. In the second model, the Chi-square, the degree of freedom (($x^2=64.950$, df=61, P=0.341), and the adjusted Goodness of Fit Index (AGFI) were .964, and the Comparative Fit Index (CFI) were .997, and the Root Mean Squared Residual (RMR) was respectively. .038. The model was best fitted and could predict the career success more highly because the goodness of fit index in the whole models was within the allowed range. In conclusion, the following research implications can be suggested. First, the occupational type of research participants was one of the most important variables to predict the career success for both research participant groups. It means that people with disabilities require human development services including education. They need to improve themselves in this knowledge-based society. Furthermore, for maintaining the career success, people with disabilities should be approached by considering the subjective career success aspects including wages and the promotion opportunities than the objective career success aspects.

• Korean Journal of Organic Agriculture
• /
• v.7 no.1
• /
• pp.91-103
• /
• 1998

After the consumption of green vegetable juice by Korean increase rapidly, the ${NO_3}^-$ intake through green vegetable juice have been ignored to consider for the calculation of daily ${NO_3}^-$ intake. It is necessary to collect the basic data on the ${NO_3}^-$ content in green vegetable juice by different sorts, harvesting time and mixing rate of vegetable, manufacturers and storage conditions for the next calculation of daily ${NO_3}^-$ intake for Korean. Followings are the research results from monitoring and laboratory experiment related with ${NO_3}^-$ and vitamine C in green vegetable juice. The ${NO_3}^-$ content of angelica plaant(tomorrow's leaf) and kale were higher in spring than those in summer and autumm. The highest value of ${NO_3}^-$ content in tomorrow's leaf and kale were 4.85 and 2.94 times higher compare to the lowest value. The average ${NO_3}^-$ content in the midribs of tomorrow's leaf and kale were 7.5 and 2.1 times higher than those in leafblades. It indicate the green vegetable juice made from leadblade of tomorrow's leaf and kale might be better compare to those from midrib in terms of ${NO_3}^-$ content. The content of ${NO_3}^-$ and vitamine C as affected by the timecourse after juice making were decreased rapidly compare to those by storage temperature in case of carrot, kale and cucumber juice. It show the positive comelation between the content of ${NO_3}^-$ and vitamine C in carrot, kale and cucumber juice regardless of room temperature(${NO_3}^-$) or cold temperature(${NO_3}^-$). The content of ${NO_3}^-$ and vitamine C of green vegetable juice by P company were the highest among the manufactuers. The lower content of ${NO_3}^-$ and vitamine C of green vegecable juice by TW company and GB company compare to P company is due to dilution with water to produce the juice. The content of ${NO_3}^-$ of green vegetable juice which were available in market showed 143ppm in carrot juice, 506ppm in tomorrow's leaf juice, 669ppm in wild water celery juice, 985ppm in kale juice, whereas the content of vitamine C were 43ppm in carrot juice, 289ppm in wild water celery juice, 353ppm in kale juice and 768ppm in tomorrow's leaf juice. It was calculated that people take 253mg by tomorrow's leaf juice, 335mg by wild water celery juice, 483mg by kale juice if they drink 500ml of green vegetable juice perday, and it suggest to excess 1.16, 1.53 and 2.21 times respectively only by green vegetable juice consumption.

• The Korean Nurse
• /
• v.20 no.4 s.112
• /
• pp.50-59
• /
• 1981

간호학생들이 당연하고 있는 문제점 미래의 간호학생들이 교육문제를 논하기 위하여는 간호학생들이 가지고 있는 문제점을 파악하고 또 이해하는 것이 우선순위가 될 것이다. 간호학생들이 문제점에 대한 연구는 한국에서 뿐아니라 미국에서도 꽤 많이 시행되어져 왔으며 특히 간호학과정에서 중간 탈락되는 중퇴자들에 대한 연구들 중에 이러한 문제점에 대해서 언급한 것이 많다. 고등학교를 졸업하고 곧 대학과정에 진학한 학생들을 대상으로 조사 보고될 Munro의 자료에 의하면 전문대학과정에서 27$\%$, 대학과정에서는 41$\%$의 간호학생들이 간호학과정에서 중간 탈락하고 있음이 보고되고 있다. 이들이 중간탈락하는 데에는 여러 가지 이유가 있으나 그 중 ''간호학에 흥미를 잃어서''가 가장 큰 이유로 보고되고 있다. 이곳 한국사회에서도 역시 비슷한 현상을 보이고 있다. 그러나 대학입시경쟁과 대학내에서의 전과가 거의 허용되지 않는 특수여건이기 때문에 학교를 중간 탈락하는 율은 미국이 보고만큼 높지는 않으나 역시 ''간호학에 흥미를 잃는다''는 것이 간호학생들의 가장 큰 문제점으로 대두되고 있다. 최근 한국에서 시행된 간호학생들에 관한 연구(표 1 참조)에 의하면 간호학생들의 학문에 대한 만족도는 조사자의 35$\~$50$\%$정도에 불과하였고 더우기 이 비율은 고학년에 올라갈수록 더욱 감소되고 있는 경향을 보이고 있다. 한국에서 시행된 어느 연구보고에 의하면 간호학에 실망했다고 생각하는 학생이 전체의 67$\%$였으며, 다른 학교로 전과를 희망한 경험이 있다는 학생이 71$\%$나 되는 것으로 보고되고 있다. 그러나 왜 흥미를 잃게 되는지 그 이유에 대하여 설명해 주는 연구는 많지 않았다. 미국의 한 저자는 간호학생들이 간호학에 흥미를 잃게 되는 원인을 간호원의 역할에 대한 이해가 정확하지 못한 것과 졸업 후 진로기회에 대한 인식부족 때문이라고 추측하고 있다. 간호학에 흥미를 잃게 되는 이유는 크게 다음의 세 가지로 분류 요약될 수 있다. 첫째, 간호학을 전공으로 택한 동기이다. 간호학의 특수성으로 인하여 학생들이 간호학을 전공으로 택한 동기도 다른 전공분야보다는 훨씬 다른 여러 종류를 보이고 있다. 즉, 종교적 이유, 다른 사람들에게 봉사할 수 있는 직업이기 때문에, 쉽게 취업을 할 수 있어서, 결혼 후에도 직업을 가질 수 있기 때문에, 외국으로 쉽게 취업할 수 있어서 등이 간호학을 선택한 이유로 보고되고 있다. 흥미나 적성에 맞다고 생각하기 때문에 간호학을 택한 학생의 수는 다른 과에 비하여 훨씬 적다. 이러한 흥미나 적성 때문이 아닌 여러 가지 다른 이유들로 인하여 간호학을 택한 경우에 특히 간호학에 쉽게 흥미를 잃어버리는 것을 볼 수 있다. 간호학에 현실적인 개념을 가지고 있는 학생들일수록 추상적이고 현실적인 개념을 가지고 있는 학생들보다 더 간호학에 지속적인 흥미를 가지며 중간에 탈락하는 율이 훨씬 적다는 것이 많은 연구에서 보고되었다. 또한 흥미나 적성 때문에 간호학을 택하였다는 학생들이 다른 과로 전과를 희망하는 율이 낮다는 것도 보고되었다. 둘째, 교과내용자체나 실습에 대한 불만족이다. 간호학에 대한 체계적인 교과내용의 결여, 과중한 과제물, 임상실습에서의 욕구불만, 실습으로 인한 부담, 지식과 실습의 차이점에 대한 갈등 등이 주요 이유로 보고되고 있다. 대부분의 연구들이 이 교과목이나 실습에 대한 불만족, 특히 실습경험에서의 갈등을 학생들이 흥미를 잃는 가장 중요한 요인이 되는 것으로 보고하고 있다. 어느 한 연구에서는 응답자의 90$\%$가 임상실습에 만족하지 못한다고 응답하였으며 그들 중의 88$\%$가 실습감독에 문제가 있다고 생각한다고 보고하였다. 셋째, 교수들에 대한 불만족이다. 대부분의 연구들이 학년이 올라가면 갈수록 교수에 대한 신뢰도가 낮아지며 또한 그에 비례하여 간호학에 대한 만족도가 낮아진다고 보고하고 있다. 교육내용에 대한 전문지식의 결여, 학생들과의 인간적인 관계의 결여, 교수법에 대한 불만족 등이 교수에 대한 불만의 주요내용으로 보고되었다. 미래의 간호에 부응할 학생교육 계속적인 사회적 변동과 더불어 급격하게 변화하고 있는 일반인들의 건강에 대한 요구도와 앞에서 기술한 문제점 등을 감안할 때 학생들에게 동기를 부여하고 간호학에 확신감을 가질 수 있도록 준비시키므로써 간호환경에서 실망하기보다는 오히려 그것을 받아들여 변화하는 사회요구에 책임감을 느낄 수 있도록 교육시키는 것이 미래의 간호학생을 준비시키는데 가장 중요한 요인이라고 할 수 있겠다. 이러한 교육을 위하여 다음의 두가지 안을 제시한다. 1. 교수와 학생간의 관계-서로의 좋은 동반자 : 교수들이 학생에게 미치는 영향, 특히 학생들의 성취도에 대한 영향에 대하여는 이미 많은 연구가 시행되었다. Tetreault(1976)가 간호학생들의 전문의식에 영향을 미치는 요인에 대하여 연구한 바에 의하면 다른 어느 것보다도 교수의 전문의식여부가 학생들의 전문의식 조성에 가장 큰 영향을 미친다고 하였다. 또한 학생들이 교수에게 신뢰감을 가지고 있을때, 교수들이 전문가로서의 행동을 하는 것을 보았을때 비로서 배움이 증가된다고 하였다. Banduras는 엄격하고 무서운 교수보다는 따뜻하고 인간적인 교수에게 학생들이 더 Role Model로서 모방하려는 경향을 나타낸다고 보고 하였다. 그러면 어떻게 학생에게 신뢰받는 교수가 될 수 있겠는가? apos;학생들의 요구에 부응할 때apos;라고 한마디로 표현할 수 있을 것이다. Lussier(1972)가 언급한 것처럼 학생들의 요구에 부응하지 못하는 교육은 Piaget이 언급한 교육의 기본 목표, 즉 개인에게 선배들이 한 것을 그대로 반복하여 시행하도록 하는 것이 아니라 새로운 것을 시도할 수 있는 능력을 가지게 하는 목표에는 도달할 수 없으며 이러한 목표는 간호학에도 가장 기본이 되어야 할 기본목표이기 때문이다. 학생들이 현재 어떤 요구를 가지고 있으며 또 어떤 생각을 하고 있는지 계속 파악하고 있는 것이 학생요구에 부응하는 교육을 할 수 있는 기본조건이 될 것이다. 의외로 많은 교수들이 학생들을 이해하고 있다고 생각하고 있으나 잘못 이해하고 있는 경우가 많다. 표 2는 현 간호학생들이 생각하고 있는 가치관과 문제점을 파악하고 또 교수가 그 가치관과 문제점을 어느 정도 파악하고 있는지 알아보기 위하여 일개 4년제 대학 200여명의 학생과 그 대학에 근무하는 18명의 교수진을 대상으로 질문한 결과를 간략하게 보고한 것이다. 또한 여기에서 학생이 보고하는 가치관, 문제점, 교수에게 바라는 점이 교수가 이해하고 있는 것과 차이가 있다는 것도 보여주고 있다. 우리가 학생들의 요구를 파악할 수 있도록 귀를 기울이고 이해하며, 그 요구에 부응하려고 노력할때 진정한 교수와 학생간의 관계가 이루어질 수 있을 것이며 이때 비로서 우리는 apos;partnershipapos;을 이룰 수 있을 것이다. 이때 간호학에 대한 실망은 줄어들 수 있을 것이며 우리도 학생들에게 전문가적인 태도를 함양시켜줄 수 있는 기회를 부여할 수 있을 것이다. 이렇게 될때 앞으로 기다리고 있는 미지의 의무에 효과적으로 또 적극적으로 대처할 수 있는 자질을 형성한 학생들을 준비해 낼 수 있을 것이다. 2. 간호모델에 의한 교과과정의 확립과 임상실습에의 적용 : 교과과정이 학생들의 모양을 만들어주는 하나의 기본틀이라고 말할 수 있다면 미래의 요구에 부응하는 학생들을 준비시키기 위하여 지금까지와는 다른 새로운 방향의 교과과정이 필요하다는 것은 재론할 필요가 없을 것이다. 이미 진취적인 간호대학에서는 guided design systems approach 또는 integrated curriculum 등의 새로운 교과과정을 시도하고 있음은 알려진 사실이다. 물론 간호모델에 준한 교과과정을 발전시키는데 대한 장점과 이에 수반되는 여러가지 새로운 문제점에 대하여 많은 논란이 있으나 모든 교과과정이 처음 시도될 때부터 완전한 것이 있을 수 없으며 시간이 지남에 따라 성숙되는 것임을 감안해 볼 때 이러한 새로운 교과과정에의 시도는 미래의 새로운 간호방향에 필수적인 사업이라고 하겠다. 이러한 교과과정을 개발하는데 몇가지 게안점을 첨부하려 한다. (1) 새로운 교과과정의 개발은 처음부터 끝까지 모든 교수진의 협력과 참여로 이루어져야 한다. (2) 비록 처음에는 어렵고 혼란이 있더라도 교과과정은 의학모델이 아닌 간호모델을 중심으로 이루어져야 한다. (3) 간호모델에서 다루어지는 개념들은 모두 직접 간호업무에 적용될 수 있는 것으로 선택되어야 한다. (4) 교과과정의 결과로 배출되는 학생들의 준비정도는 그 지역사회에 적합하여야 한다. (5) 그 지역사회의 고유한 문화적 요소가 포함되어야 한다. 아직 우리는 간호분야 내부의 갈등을 해결하지 못하고 있는 시기에 있다. 우리 내부의 문제점을 잘 해결할 수 있을때 외부와의 갈등에 잘 대처할 수 있을 것이다. 내부의 갈등을 잘 해결하기 위한 힘을 모으기 위하여는 동반자, 즉 교수와 학생, 간호교육자와 임상간호원 등이 서로 진정한 의미의 동반자 될때 가장 중요한 해결의 실마리가 될 것이다.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.3
• /
• pp.4-24
• /
• 2009

This paper examined archaeological resources that discuss how Silla entered the Gangneung area, the coastal region along the East Sea that has been excavated most actively. Silla expanded its territories while organizing the its system as an ancient state and acquired several independent townships in various regions, stretching its forces to the East Sea area faster than any other ancient states of the time. In particular, many early relics and heritages of Silla have been found in Gangneung, the center of the East Sea area. Many archaeological resources prove these circumstances of that time and provide brief texts that are valuable for our interpretation of historical facts. In this respect, it was possible for me to examine these resources to answer my question as to why early relics and heritages of Silla are found in the Gangneung area. Based on my research on Silla's advancement into the Gangneung area, I have acquired the following results: How did Silla rule this area after conquering Yeguk in the Gangneung area? After conquering the Gangneung area, Silla attempted an indirect ruling at first. Later, Silla adopted a direct ruling system. I divided the indirect ruling period into two phases: introduction and settlement. In detail, Silla's earthenware and stone chamber tombs first appeared in Hasi-dong in the fourth quarter of the 4th Century and the tombs spread to Chodang-dong in the second quarter of the 5th Century. A belt with dragon pattern openwork, which seems to be from the second quarter of the 5th Century, was found to tell us that the Gangneung region began receiving rewards from Silla during this time. Thus, the period from the fourth quarter of the 4th Century to the second quarter of the 5th Century is designated as the 1st Phase (Introduction) of indirect ruling in terms of aechaeological findings. This is when Silla was first advanced to the Gangneung area and tolerated independent administration of the conquered. In the third and fourth quarters of the 5th Century, old mound tombs appeared and burials of relics that symbolized power emerged. In the third quarter of the 5th Century, stone chamber tombs were prevalent, but wooden chamber tombs, stone mounded wooden chamber tombs, and lateral entrance stone chamber tombs began to emerge. Also, tombs that were clustered in Hasi-dong and Chodang-dong began to scatter to Byeongsan-dong, Yeongjin-ri, and Bangnae-ri nearby. Steel pots were the symbol of power that emerged at this time. In the fourth quarter of the 5th Century, stone chamber tombs were still dominating, but wooden chamber tombs, stone mounded wooden chamber tombs, and lateral entrance stone chamber tombs became more popular. More crowns, crown ornaments, big daggers, and belts were bestowed by Silla, mostly in Chodang-dong and Byeongsan-dong. The period from the third quarter to the fourth quarter of the 5th Century was designated as the 2nd Phase (Settlement) of indirect ruling in terms of aechaeological findings. At this time, Silla bestowed items of power to the ruling class of the Gangneung area and gave equal power to the rulers of Chodang-dong and Byeongsan-dong to keep them restrained by each other. However, Silla converted the ruling system to direct ruling once it recognized the Gangneung area as the base of its expedition of conquest to the north. In the first quarter of the 6th Century, old mound tombs disappeared and small/medium-sized mounds appeared in the western inlands and the northern areas. In this period, the tunnel entrance stone chamber tombs were large enough for people to enter with doors. A cluster of several tunnel entrance stone chamber tombs was formed in Yeongjin-ri and Bangnae-ri at this time, probably with the influence of Silla's direct ruling. In the first quarter of the 6th Century, Silla dispatched officers from the central government to complete the local administration system and replaced the ruling class of Chodang-dong and Byeongsan-dong with that of Silla-friendly Yeonjin-ri and Bangnae-ri to reorganize the local administration system and gain full control of the Gangneung area.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.3
• /
• pp.351-360
• /
• 1995

Background: Pressure support(PS) is becomimg a widely accepted method of mechanical ventilation either for total unloading or for partial unloading of respiratory muscle. The aim of the study was to find out if PS exert different effects on respiratory mechanics in synchronized intermittent mandatory ventilation(SIMV) and continuous positive airway pressure (CPAP) modes. Methods: 5, 10 and 15 cm $H_2O$ of PS were sequentially applied in 14 patients($69{\pm}12$ yrs, M:F=9:5) and respiratory rate (RR), tidal volume($V_T$), work of breathing(WOB), pressure time product(PTP), $P_{0.1}$, and $T_1/T_{TOT}$ were measured using the CP-100 pulmonary monitor(Bicore, USA) in SIMV and CPAP modes respectively. Results: 1) Common effects of PS on respiratory mechanics in both CPAP and SIMV modes As the level of PS was increased(0, 5, 10, 15 cm $H_2O$), $V_T$ was increased in CPAP mode($0.28{\pm}0.09$, $0.29{\pm}0.09$, $0.31{\pm}0.11$, $0.34{\pm}0.12\;L$, respectively, p=0.001), and also in SIMV mode($0.31{\pm}0.15$, $0.32{\pm}0.09$, $0.34{\pm}0.16$, $0.36{\pm}0.15\;L$, respectively, p=0.0215). WOB was decreased in CPAP mode($1.40{\pm}1.02$, $1.01{\pm}0.80$, $0.80{\pm}0.85$, $0.68{\pm}0.76$ joule/L, respectively, p=0.0001), and in SIMV mode($0.97{\pm}0.77$, $0.76{\pm}0.64$, $0.57{\pm}0.55$, $0.49{\pm}0.49$ joule/L, respectively, p=0.0001). PTP was also decreased in CPAP mode($300{\pm}216$, $217{\pm}165$, $179{\pm}187$, $122{\pm}114cm$ $H_2O{\cdot}sec/min$, respectively, p=0.0001), and in SIMV mode($218{\pm}181$, $178{\pm}157$, $130{\pm}147$, $108{\pm}129cm$ $H_2O{\cdot}sec/min$, respectively, p=0.0017). 2) Different effects of PS on respiratory mechanics in CP AP and SIMV modes By application of PS (0, 5, 10, 15 cm $H_2O$), RR was not changed in CPAP mode($27.9{\pm}6.7$, $30.0{\pm}6.6$, $26.1{\pm}9.1$, $27.5{\pm}5.7/min$, respectively, p=0.505), but it was decreased in SIMV mode ($27.4{\pm}5.1$, $27.8{\pm}6.5$, $27.6{\pm}6.2$, $25.1{\pm}5.4/min$, respectively, p=0.0001). $P_{0.1}$ was reduced in CPAP mode($6.2{\pm}3.5$, $4.8{\pm}2.8$, $4.8{\pm}3.8$, $3.9{\pm}2.5\;cm$ $H_2O$, respectively, p=0.0061), but not in SIMV mode($4.3{\pm}2.1$, $4.0{\pm}1.8$, $3.5{\pm}1.6$, $3.5{\pm}1.9\;cm$ $H_2O$, respectively, p=0.054). $T_1/T_{TOT}$ was decreased in CPAP mode($0.40{\pm}0.05$, $0.39{\pm}0.04$, $0.37{\pm}0.04$, $0.35{\pm}0.04$, respectively, p=0.0004), but not in SIMV mode($0.40{\pm}0.08$, $0.35{\pm}0.07$, $0.38{\pm}0.10$, $0.37{\pm}0.10$, respectively, p=0.287). 3) Comparison of respiratory mechanics between CPAP+PS and SIMV alone at same tidal volume. The tidal volume in CPAP+PS 10 cm $H_2O$ was comparable to that of SIMV alone. Under this condition, the RR($26.1{\pm}9.1$, $27.4{\pm}5.1/min$, respectively, p=0.516), WOB($0.80{\pm}0.85$, 0.97+0.77 joule/L, respectively, p=0.485), $P_{0.1}$($3.9{\pm}2.5$, $4.3{\pm}2.1\;cm$ $H_2O$, respectively, p=0.481) were not different between the two methods, but PTP($179{\pm}187$, $218{\pm}181 cmH_2O{\cdot}sec/min$, respectively, p=0.042) and $T_1/T_{TOT}$($0.37{\pm}0.04$, $0.40{\pm}0.08$, respectively, p=0.026) were significantly lower in CPAP+PS than in SIMV alone. Conclusion: PS up to 15 cm $H_2O$ increased tidal volume, decreased work of breathing and pressure time product in both SIMV and CPAP modes. PS decreased respiration rate in SIMV mode but not in CPAP mode, while it reduced central respiratory drive($P_{0.1}$) and shortened duty cycle ($T_1/T_{TOT}$) in CPAP mode but not in SIMV mode. By 10 em $H_2O$ of PS in CPAP mode, same tidal volume was obtained as in SIMV mode, and both methods were comparable in respect to RR, WOB, $P_{0.1}$, but CPAP+PS was superior in respect to the efficiency of the respiratory muscle work (PTP) and duty cycle($T_1/T_{TOT}$).