• Proceedings of the Korea Water Resources Association Conference
• /
• 1986.07a
• /
• pp.93-101
• /
• 1986

This study aims at analysis and application of PMP(Probable Maximum Precipitation) for the determination of design of major hydraulic structures. PMP was estimated by hydro-meteorolgical method and envelope curve method. PMF(Probable Maximum Flood) was then estimated from this PMP by synthetic unit hydrograph method and chow method. From the comparison of three methods for PMP estimation of magnitude of PMP in order of statistical, hydro-meteorlogical, envelope curve method. Amon PMP results estimated by each method it is believed that the hydro-meteorological method gave the best proper value in comparison with historical maximum rainfall because of this method reflected upon all meteorological factor. From the comparison of PMP with probable rainfall and flood, it was shown that estimated value by statistical method and hydro-metelogical method were nearly equivalent to the value of return period 200 to 500 year. It was found that PMF estimated from would be more safe for the design of major hydraulic structures in the consinderation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.1
• /
• pp.1-9
• /
• 2000

This study shows the defect detection and sizing capability of ultrasonic guided waves in the nondestructive inspection of heat exchanger and steam generator tubing. Phase and group velocity dispersion curves for the longitudinal and flexural modes of a sample Inconel tube were presented for the theoretical analysis. EDM(Electric Discharge Machining) wears in tubing under a tube support plate and circumferential laser notches in tubing were detected by an axisymmetric and a non-axisymmetric transducer set up, respectively. EDM wears were detected with L(0, 2), L(0, 3) and L(0, 4) modes and among them L(0, 4) mode was found to be the most sensitive. It was also found that the flexural modes around L(0, 1) mode could be used for the detection and sizing of laser notches in the tubing.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.29-36
• /
• 2012

In CCPM Technique, as the buffer size calculation method, the Cut and Paste(C&P) method and the Root Square Error (RSE) method for all tasks carried out the same treatment, without considering the actual situation and characteristics of the task, the lack of reasonable judgment, is too simple and hasty. In this paper, taking into account the limitations of existing methods, a new method of buffer sizing method based on statistical analysis was introduced. It makes statistical analysis for the relationship between each worker and a variety of tasks, and use the information to predict the next task time. In order to verify the effectiveness of the new method, according to different task difficulty and the number of tasks set up the project. Use C&P, RSE method and new methods to predict the time of the project. Through Monte Carlo Simulation to simulate the project time, a comparison of three methods of performance. The results show that the new method can achieve the managers expect the probability of completion, and for those tasks can be completed ahead of schedule, the new method can save project time.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.1
• /
• pp.191-199
• /
• 2003

It is known that the distribution of the active earth pressure against a rigid wall is not triangular, but nonlinear, due to arching effects in the backfill. In the farmer paper, a new formulation was proposed for the nonlinear distribution of active earth pressure on a translating rigid retaining wall considering arching effects. In this paper, parametric study is performed to investigate the effect of ${\phi}, {\delta}$ and wall height on the magnitude and distribution of active earth pressure calculated from the proposed equations. In order to check the accuracy of the proposed formulation, the predictions from the equation are compared with both existing full-scale test results and values from existing equations. The comparisons between calculated and measured values show that the proposed equations satisfactorily predict both the earth pressure distribution and the lateral active earth force on the translating wall. Simplified design charts are also proposed for the modified active earth pressure coefficient and fur the height of application of the lateral active force in order to facilitate the use of the proposed equation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.973-991
• /
• 2022

Globally, several countries with sea are using eco-friendly energy resources through offshore wind power development by overcoming the weak point of the existing power generation method. The sea has the advantage of being able to develop large scale wind farms in wide waters, but the installation of marine structures threatens the safe operation of vessels. Accordingly, a standard guideline for safe navigation by analyzing the mutual effects between ship routes and offshore wind site was presented by the PIANC. Nonetheless, the standard guideline calculated the same safe distance in all situations. Therefore, this study developed a calculation model for an optimal safe distance between ship routes and offshore wind sites by reflecting the ship's maneuvering, encounter situations, environmental force, traffic density, offshore wind power generators, and channel types. As a result of the validation simulation, the developed model showed that the optimal safe distance was secured.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1556-1560
• /
• 2006

유역 전체의 토양침식량에 대한 토사유출량의 비로 정의되는 토사유출률은 유역의 크기가 커지면 토사가 유출되는 과정에서 퇴적되거나, 저류될 수 있는 지형적인 요인이 많아지게 되어 상대적으로 감소한다. 우리나라 산불지역의 유역에 대량의 토사유출을 제어하기 위해 설치된 여러개의 사방댐을 활용하여 강우사상별 댐 저류지에 퇴적되는 토사량 측정하였다. 실측된 토사유출량과 산지사면을 대상으로 개발된 토양침식 모형인 SEMMA에 의해 예측된 토양침식량과를 비교하여 유역크기에 따른 토사유출률의 관계를 분석하였다. SEMMA는 강우에 의한 토양입자의 분리현상과 지표유출에 의한 세류와 세류간 침식에 의해 발생하는 토양침식량을 산정하지만, 구곡이나, 유역의 수로에서의 침식은 고려하지 않는다. 보편적으로 토사유출률은 1.0을 넘지 않으나, 본 연구에서는 토사유출률이 대부분 1.0을 넘는 결과를 보여 산불 지역의 유역에서는 수로발달과 수로확장에 의한 침식이 심각했다. 토사유출률이 산지 유역이 커짐에 따라 감소하는 경향은 세계의 다른 유역에서의 조사된 결과와 비슷한 결과를 보였으나, 수치적인 차이가 큼을 알 수 있었다. 또한 토사유출률은 강우사상의 크기에도 상관성이 있음이 확인되었다.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.6
• /
• pp.53-60
• /
• 2011

The purpose of this study is to propose a method that can reliably evaluate the fundamental period of a rockfill dam using the micro-earthquake records, which were obtained at the domestic dam sites. For total 20 micro-earthquake records obtained at 7 domestic rockfill dam sites against 6 earthquake events which recently occurred, the fundamental periods of seven rockfill dams were evaluated by two kinds of methods; one is a method using acceleration amplification ratio and the other is a method using acceleration response spectrum ratio. Applicability of each method to evaluation of fundamental periods of domestic rockfill dams was examined. In the moderate seismicity region like our country, the method using acceleration response spectrum ratio, which could evaluate the fundamental period of the rockfill dam using the ratio between the response spectrum for acceleration observed at the dam crest and that observed at the dam base or abutment, proved to be reliable and was proposed in this study. From the results of analyses, it was found that the proposed method could consistently evaluate the fundamental period of the rockfill dam and the results obtained by the proposed method were very similar to the results by the existing method which was proposed from the analysis for the earthquake records observed at Japanese dam sites.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1254-1258
• /
• 2008

본 연구에서는 대표적인 준분포 장기유출모형으로 널리 쓰이는 SWAT-K와 HSPF를 이용하여 충주댐유역을 대상으로 2000년부터 2006년까지의 총유출량 산정을 산정하고, 두 모형간의 총 유출량 차이를 분석하기 위해 증발산량, 지표유출량, 중간유출량, 기저유출량 등 각 수문성분별 모의결과를 비교하고, 모형별 유출특성을 분석하였다. 모의기간 연평균 유출량은 SWAT-K는 관측치에 비해 약 2%과다, HSPF는 약 3% 과소하게 모의되었고 모형의 적용 타당성을 가늠할 수 있는 결정계수는 SWAT-K가 0.78, HSPF가 0.88로 나타났다. 수문성분별로 모의치를 비교한 결과 중간 유출은 SWAT-K가, 지하수유출은 HSPF가 크게 산정되는 등 수문성분별 크기에 차이를 드러냄에 따라, 각 모형에서 수문성분을 도출하는 구조의 차이와 계산과정 등의 상세한 비교분석이 필요한 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1188-1192
• /
• 2004

본 연구는 그동안 우리나라 강우-유출분석에 주로 이용되어 왔던 Clark 단위도를 선택하여 그 매개변수와 유역반응과의 관계를 고찰하였다. 대상유역으로 국제수문개발계획 시험유역 하나인 위천유역과 남강, 주암댐을 대상유역으로 선정하여, 실측강우-유출자료에 근거하여 최적화된 단위도를 유도한 후, Clark 단위도의 집중시간(Tc)과 저류상수(K)를 산정하였다. 본 연구를 수행한 결과, 유역에서의 각 홍수사상별 첨두홍수량에 대한 Clark 단위도의 매개변수인 집중시간, 저류상수와 유역반응과의 관계를 규명할 수 있었다. 집중 시간과 저류상수는 모두 작은 홍수사상에서는 지수적으로 감소하지만 어느 홍수량 크기 이상부터는 거의 일정한 집중시간을 가짐을 알 수 있었다. 이는 큰 홍수사상에서는 유역의 선형성을 재현하고 있음을 보여주는 것이다. 또한, 이를 통해 우리나라에서 홍수량 산정시에 사용되어 오고 있는 대표단위도 개념은 큰 홍수사상에 적용될 경우에는 과소한 홍수량을 산정하므로 새로운 개념의 단위도 적용이 필요하다고 판단된다.

• Journal of Korea Water Resources Association
• /
• v.34 no.6
• /
• pp.753-761
• /
• 2001

In this paper, the experiments to decide the riprap size for the local scour protection at bridge piers and the coefficients of attack angle were conducted. A formula for the decision of the riprap size and a figure for the coefficients of attack angle were suggested based upon the experimental results. The coefficients of attack angle indicate different values based on the variation of the length-width ratio of bridge pier and the coefficients are increased by the increment of the attack angle. In this paper, the experiments using the piers having the opening ratios of 90%, 92.86% and 95% were conducted. Also, the attack angles 0$^{\circ}$, 15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$ and 60$^{\circ}$ as well as four different length-width ratios of the bridge pier were utilized. The suggested formula were compared with 6 different formulas and the riprap sizes calculated using the equation suggested in this paper indicate the similar patterns with the formula suggested by Richardson. The suggested formula in this paper can be widely applied in the riprap design for the local scour protection around the bridge pier with the consideration of the attack angle to the flow.