• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.225-235
• /
• 2020

Ultrasonic investigation of damage detection has been widely used for non-destructive testing of various concrete structures. This study focuses on damage detection analysis with the aid of wave propagation in two-phase composite concrete with aggregate (inclusion) and mortar (matrix). To fabricate a realistic simulation model containing a variety of irregular aggregate shapes, the mesh generation technique using an image processing technique was proposed. Initially, the domains and boundaries of the aggregates were extracted from the digital image of a typical concrete cut-section. This enables two different domains: aggregates and mortar in heterogeneous concrete sections, and applied the grids onto these domains to discretize the model. Subsequently, finite element meshes are generated in terms of spatial and temporal requirements of the model size. For improved analysis results, all meshes are designed to be quadrilateral type, and an additional process is conducted to improve the mesh quality. With this simulation model, wave propagation analyses were conducted with a central frequency of 75 kHz of the Mexican hat incident wave. Several void damages, such as needle-shaped cracks and void-shaped holes, were artificially introduced in the model. Finally, various formats of internal damage were detected by implementing energy mapping based signal processing.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.599-608
• /
• 2017

Cracks on the asphalt road surface can affect the speed of the car, the consumption of fuel, the ride quality of the road, and the durability of the road surface. Such cracks in roads can lead to very dangerous consequences for long periods of time. To prevent such risks, it is necessary to identify cracks and take appropriate action. It takes too much time and money to do it. Also, it is difficult to use expensive laser equipment vehicles for initial cost and equipment operation. In this paper, we propose an effective detection method of road surface defect using ROI (Region of Interest) setting and cany edge detection method using UAV image. The results of this study can be presented as efficient method for road surface flaw detection and maintenance using UAV. In addition, it can be used to detect cracks such as various buildings and civil engineering structures such as buildings, outer walls, large-scale storage tanks other than roads, and cost reduction effect can be expected.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.2
• /
• pp.136-141
• /
• 2004

A torsional guided wave mode was applied to detect a crack in a pipe. An array of electromagnetic acoustic transduce. (EMAT that can generate and receive torsional guided ultrasound with the frequency of 200kHz was designed and fabricated for testing a pipe of 2.5 inch diameter Artificial notches with various depths were fabricated in a bent feeder pipe mock-up and the detectability was examined from the distance of 2m of the specimen. The axial notches with the depth of 5% of wall thickness were successfully detected by a torsional mode (T(0,1)) generated by the EMAT However, it was found that the depth of defects was not related to the signal amplitude.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2341-2348
• /
• 2009

An intrusion detection technique based on host consider system call sequence or system call arguments. These two ways are suitable when system call sequence or order and length of system call arguments are out of order. However, there are two disadvantages which a false positive rate and a false negative rate are high. In this paper we propose the T-N2SCD detection model based on Time Window in order to reduce false positive rate and false negative rate. Data for using this experiment is provided from DARPA. As experimental results, the proposed model showed that the false positive rate and the false negative rate are lowest at an interval of 1000ms than at different intervals.

• Journal of the KSME
• /
• v.25 no.2
• /
• pp.122-129
• /
• 1985

진동신호 측정 및 해석과 병행하여 구조 해석용 컴퓨터 소프트웨어의 활용은 결함 진단 기술을 더욱 다양하게 할 수 있으며 궁국에 가서는 컴퓨터 시뮬페이션에 의하여 결함 여부 및 위치색 출을 더욱 효과적으로 수행할 수 있다. 물론 이를 위하여는 컴퓨터 모델링 기술의 개발, 시스템 Indentification 문제, 시스템의 선형화 문제, 경계조건의 변화를 모델링하는 문제등 제반 문제점이 선결되어져야 한다. 진동신호 측정 및 분석에 의한 결함탐지 및 컴퓨터 소프트웨어 활용에 관한 상호관계를 도표로 표시하면 그림 1과 같다.

• Journal of Industrial Technology
• /
• v.22 no.A
• /
• pp.29-36
• /
• 2002

A damage detection algorithm using vibration modes is applied to the ring structures and the modal behaviors of the slightly asymmetric rings are examined. Mode shape change, MSER(modal strain energy ratio) and MCR(modal curvature ratio) are investigated to identify the locations of faults or damages The above fault detection parameters are calculated and compared by the finite element analysis on rings with designed local damages. Damages are modeled as a reduced stiffness in the analysis The results show that MSER and MCR can be proper parameters to detect local damages in the ring structures.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.328-331
• /
• 2011

최근 소프트웨어 결함이나 보안 취약점을 분석하고 발견하기 위해 퍼징(fuzzing)에 대한 연구가 활발하다. 퍼징은 무작위 입력 데이터를 대상 프로그램에 주입하여 그 결과를 관찰하면서 결함을 탐지하는 테스팅 방법이다. 본 논문에서는 웹 브라우저를 대상으로 기존의 '변이 기반의 덤 퍼징'(Mutation based Dumb Fuzzing) 방식과 '생성 기반의 지능적 퍼징'(Generation based Smart Fuzzing) 방식을 비교 분석하였다. 그리고 실험을 통해 기존의 퍼징 도구들의 성능을 측정하고 이를 바탕으로 브라우저 퍼징에서' 변이 기반의 덤 퍼징' 이 웹 브라우저의 결함 및 취약점 탐지에 더 효율적이라는 것을 보인다. 그리고 웹 브라우저를 대상으로 '변이 기반의 덤 퍼징' 방식을 적용할 때, 코드 실행 커버리지를 고려한 다수의 입력 템플릿 확보와 다수의 템플릿들에 대한 구성 요소들을 랜덤하게 섞어서 변이를 하는 효과적인 브라우저 퍼징 전략을 제안한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.108-109
• /
• 2009

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.387-392
• /
• 2019

A technique was researched to detect bolt looseness using a transfer impedance technique (the dual piezoelectric material technique) for monitoring the structural health of a bolt joint. In order to use the single piezoelectric material technique, an expensive impedance analyzer should be used. However, in the transfer impedance technique, low-cost fault detection can be performed using a general function generator and a digital multimeter. A steel plate frame test specimen composed of bolt joints was fabricated, and the tightening torques of the bolts were loosened step by step. By using the transfer impedance method, the damage index was obtained. It was found that the presence of faults could be reasonably estimated using the damage index, which increased with the degree of bolt looseness. An experiment was performed on the same specimen using the single piezoelectric material technique, and the results showed a similar tendency. It could be possible to estimate the damage of a bolt joint at low cost by eliminating the expensive impedance analyzer. This method could be used effectively for structural health monitoring after carrying out a study to estimate the fault location and severity.

• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.97-102
• /
• 2003

Wire ropes are used in a myriad of various industrial applications such as elevator, mine hoist, construction machinery, lift, and suspension bridge. Especially, the wire rope of crane is important component to container transfer. If it happens wire rope failures during the operation, it may lead to safety accident, economic loss by productivity decline and so on. To solve this problem, we developed remote wire rope fault detecting system, and this system is consisted of 3 parts that portable fault detecting part, signal processing part and remote monitoring part. All detected signal has external noise or disturbance according to circumstances. So, we applied to discrete wavelet transform to extract a signal from noisy data. It is verified that the detecting system by de-noising has good efficiency for inspecting faults of wire ropes in service. As a result, by developing this system, container terminal could reduce expense because of extension fo wire ropes exchange period and could competitive power. Also, this system is possible to apply in several field such as elevator, lift and so on.