• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.5
• /
• pp.189-197
• /
• 2006

A stoichiometric mixture of evaporating materials for $AgGaSe_2$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $AgGaSe_2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy(HWE) system. The source and substrate temperatures were $630^{\circ}C\;and\;420^{\circ}C$, respectively. The temperature dependence of the energy band gap of the $AgGaSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=1.9501eV-(8.79x10^{-4}eV/K)T^2(T+250K)$. After the as-grown $AgGaSe_2$ single crystal thin films was annealed in Ag-, Se-, and Ga-atmospheres, the origin of point defects of $AgGaSe_2$ single crystal thin films has been investigated by the photoluminescence (PL) at 10K. The native defects of $V_{Ag},\;V_{Se},\;Ag_{int},\;and\;Se_{int}$ obtained by PL measurements were classified as a donors or accepters type. And we concluded that the heat-treatment in the Ag-atmosphere converted $AgGaSe_2$ single crystal thin films to an optical p-type. Also, we confirmed that Ga in $AgGaSe_2$/GaAs did not form the native defects because Ga in $AgGaSe_2$ single crystal thin films existed in the form of stable bonds.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.4
• /
• pp.412-417
• /
• 2012

Mucopolysaccharidosis (MPS) is a disorder which is caused by the defect of the lysosomal enzyme that is essentially needed for resolution of glycosaminoglycans (GAGs). Metabolite of GAGs will accumulate in the lysosome of cells and will result in the dysfunction of cells, tissues, and organs. Eventually, patients will manifest both mental retardation and physical disorders. In worst cases, mucopolysaccharidosis can cause premature death. The current clinical types have been classified as MPS from type I to type IX according to the defect of certain enzyme. The dental complications have been reported as delay of eruption, enamel hypoplasia, microdontia, malocclusion, condylar defects, gingival hyperplasia and dentigerous cystlike follicle. This clinical report presents the case of a boy with MPS type II, Hunter Syndrome which has various dental complications.

• Journal of Oral Medicine and Pain
• /
• v.32 no.4
• /
• pp.449-453
• /
• 2007

Trigeminal neuralgia is defined as "a sudden, usually unilateral, brief stabbing recurrent pain in the distribution of one or more branches of the fifth cranial nerve" by the International Association for the Study of Pain(IASP). Trigeminal neuralgia is classified as an idiopathic trigeminal neuralgia with no apparent cause and a symptomatic trigeminal neuralgia which is caused by a structural lesion such as brain tumor. Over 80% of the tumors are meningioma, acoustic neuroma, and epidermoid tumors. Symptomatic trigeminal neuralgia can not be excluded even if old-aged patient does not have abnormal neurologic sign and symptom, and good response to pharmacotherapy. Therefore, initial examinations such as MRI or CT are essential to exclude symptomatic trigeminal neuralgia. When compared with CT, MRI, especially gadolinium enhanced MRI, has an increased sensitivity in the detection of intracranial lesions. The most effective medical treatment of trigeminal neuralgia is carbamazepine. The most common side effects of carbamazepine include drowsiness, dizziness, unsteadiness, nausea, anorexia. Hepatotoxicity, bone marrow depression are the most feared side effect of carbamazepine therapy but occurs rarely. It require periodic complete blood cell counts as well as hepatic and renal function tests. It has been recommended that complete blood cell counts is done every 2 weeks for the first 2months and then quaterly thereafter. Oxcarbazepine can be used if neutropenia occurs.

• Fire Science and Engineering
• /
• v.34 no.2
• /
• pp.49-53
• /
• 2020

This study aimed to identify the characteristics of 40 chemical accidents that occurred in Jeollabuk-do from 2004 to 2019. During this time, there were 2.5 accidents per year on average in the province; their types were classified as spill/leak, fire, explosion, adverse reaction, and complex. There were 34 leaks and six explosions, and they are categorized as follows: 12 by worker error, 16 from facility defects, and 12 by transport vehicle accidents. The substances involved in these accidents were ammonia (15%), sulfuric acid (12.5%), and silicon tetrachloride (7.5%). Notably, the rate of chemical accidents (75%) is the highest during spring and summer. In order to reduce chemical accidents, first, there should be compliance with the relevant laws. Second, the quality of safety education and training of workers should be improved. Finally, valuable government support is also necessary to improve facilities.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.12
• /
• pp.27-34
• /
• 2005

We have investigated the correlation between the active-layer uniformity and reliability of InGaN/GaN blue LEDs. According to initial characteristics, the devices are classified into two groups: group I devices of uniform light-emission and group II devices of non-uniform light-emission. The group II devices are more dependent on temperature and we have found two degradation mechanisms through reliability test. One is bulk degradation in which the degradation occurred over the entire chip and another one is edge degradation in which the degradation occurred from the edge of the chip. Bulk degradation caused by the nonradiative defects is found to be faster in group II devices while there is no difference in the rate of the much faster edge degradation, where darkening starts from the n-Ohmic contact edge. Therefore, more uniform active layer, more uniform current spreading, and the passivation of the dry-etched side-wall are essential for the high reliability of InGaN/GaN LEDs.

• Journal of Labour Economics
• /
• v.33 no.3
• /
• pp.89-127
• /
• 2010

This paper explores the causes and solutions of the problem that the official unemployment rate does not adequately represent the reality of the employment situation in Korea. First, compared to ILO's international standards, there are several differences in the measurement of unemployment in Korea, for example, the treatment of unpaid family workers working less than 18 hours per week, the classification of persons who are waiting for a new job or temporarily laid-off, and the criteria of job search activities. The questionnaire structure of the Labor Force Survey in Korea also misleads the judgment of economic activity state. Comparing the responses of the basic survey to those of the supplementing survey, approximately 90% of the responses show discrepancies and this indicates the possibility of misclassification. Next, this paper suggests the extended unemployment indicators as alternative, based on the current survey. The extended unemployment indicators support the presence of significant amounts of hidden unemployed and underemployed. And, it is found that the analyses using those indicators are very useful for the investigation of many aspects of employment dynamics.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.2 s.14
• /
• pp.133-141
• /
• 1999

Collapse of a huge structural material has brought about enormous loss of lives and property. Every construction may be destroyed by the nature's power and careless mistake of human as well as its own defect. So a great number of concern and detailed managing technique are demanded not in constructing work but also in management of constructed material. The Interest of construction safety has Increased rapidly and a plenty of effort has been attempted to manage systematically. In this study, the use of FM(Facilities Management) as a branch of GSIS(Geo-spatial Information System) was developed to offer the users convenient managing achievement and establishment of history managing system in the bridge management system. This study accomplished dividing all information of images, photos, drawing and etc. into their items of time, material and the person in charge, and developed to stue and maintain those items in database. Related database which is composed of recording of check, retrieving and adding the data was accomplished to an easy access of database, and by using these data as output for example images, m display, report and hard copy, this system was proved to help manage efficiently in bridge management system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.7
• /
• pp.7-15
• /
• 2020

Recently, the fourth industrial revolution has been presented as a new paradigm and additive manufacturing (AM) has become one of the most important topics. For this reason, process monitoring for each cross-sectional layer of additive metal manufacturing is important. Particularly, deep learning can train a machine to analyze, optimize, and repair defects. In this paper, image classification is proposed by learning images of defects in the metal cross sections using the convolution neural network (CNN) image labeling algorithm. Defects were classified into three categories: crack, porosity, and hole. To overcome a lack-of-data problem, the amount of learning data was augmented using a data augmentation algorithm. This augmentation algorithm can transform an image to 180 images, increasing the learning accuracy. The number of training and validation images was 25,920 (80 %) and 6,480 (20 %), respectively. An optimized case with a combination of fully connected layers, an optimizer, and a loss function, showed that the model accuracy was 99.7 % and had a success rate of 97.8 % for 180 test images. In conclusion, image labeling was successfully performed and it is expected to be applied to automated AM process inspection and repair systems in the future.

• Journal of Navigation and Port Research
• /
• v.33 no.8
• /
• pp.531-537
• /
• 2009

As the Port State Control Inspection recognized that almost marine casualties are caused by human faults rather than vessel's defaults, it has put more emphasis on the qualification of ships' crew and the education required. Accordingly, for shipping companies it is an urgent task to operate effective crew education system that can meet the standards of international agreements and domestic laws. Therefore, this study aims at deriving the attitude of crews of 'S' shipping company on the education and some implication for the effective crew education systems. For this questionnaire survey has been carried out and the data analysed by the respondent groups.

• The Journal of the Korea Contents Association
• /
• v.8 no.11
• /
• pp.162-170
• /
• 2008

The promotion of new product is one of most important object for exhibition design. The majority of conventional exhibition technique has been implemented through one-way communication. However, using digital technology, development of new exhibition techniques is necessary for promotion of high-tech products and consideration of the phases of the times. This paper propose the various possibilities of exhibition design model which is using camera sensing and video input/output. Interactivity is efficient method to communicate between viewers and displays. Viewers can be participate actively and exhibition goal will be accomplish through this. Using camera as visual senses, video input/output technique is offered not only introducing new product but also entertaining viewers through various ways of representation. Physical experience and learning process can be expected from the exhibition space and the object. The classification of the artist who are using video input/output technique and exhibition examples are described. The collaboration on a work with the new media artist and the exhibition design will be complement each other. It will be solved the problems of realization and corporation of idea and technology.