• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.230.1-230.1
• /
• 2012

본 논문에서는 대구경 광학탑재체의 조립, 정렬 및 시험에 사용되는 고정밀, 고안정 짐발장치의 개발에 대해서 소개하고자 한다. 광학탑재체의 광학시험을 위해 사용되는 짐발장치는 광축높이를 유지하기 위해서 높이조절이 가능해야하고, 조립과정과 광학시험과정 그리고 시험 후 광학탑재체를 짐발 장치로부터 분리하기 위해 수평상태와 수직상태로의 회전이 가능해야 한다. 광학측정 시험과정 중에 결상위치의 미세한 조절을 위해 광학탑재체를 수평상태에서 상하좌우 정밀한 회전이 가능해야한다. 우주궤도환경 하에서 성능측정을 위해 열진공체임버 안에서의 광학시험이 필요하므로 짐발장치를 구성하는 재질은 모두 진공사용이 적합한 것이어야 한다. 광학측정 중에 측정설비주변에서부터 인가된 외란은 광학시험과 같은 민감한 시험에서는 철저하게 제거되어야 하는데, 이와 관련하여 짐발장치의 광학측정시험형상에서의 고유진동수와 같은 동적 특성도 설계과정에 반영하여 안정적인 측정 장치가 되도록 고려되어야 한다.

• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.239-244
• /
• 1995

내부 전반사 홀로그램을 이용하여 마스크의 미세 패턴을 기록, 재생 결상하였다. 직각 프리즘과 쐐기 살 다발 가르개, 반사경을 이용하여 광학계를 구성하였으며 TIR 홀로그램의 특성을 조사하였다. 본 실험에서는 5mW의 출력과 633nm의 파장을 가진 He-Ne 레이저를 이용하여 Agfa 8E75 홀로그램 건판에 TIR 홀로그램을 기록하고 기준파의 복소 공액파인 재생파로써 홀로그램을 재생하였다. 홀로그램 건판과 마스크와의 간격을 $200\mu$m로 유지했을 때 약 $3\mu$m의 분해능을 가진 재생상을 얻었으며 $70\mu$W의 기록 광으로써 홀로그램을 기록하여 0.45%의 에돌이 효율을 얻었다. 본 실험을 통하여 렌즈를 쓰지 않는 TIR 홀로그래피의 평판 표시 소자 리소그라피 기술에 응용 가능성을 알아 보았다.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.15-21
• /
• 2004

반도체 제조산업과 나노, 바이오 산업의 비약적 발전에 따라 게이트 산화막(gate oxide)과 같이 반도체 제조공정에서 사용되는 유전체 박막(dielectric film)의 두께는 수 $\mu\textrm{m}$에서 수 nm 에 이르기까지 다양할 뿐 아니라 얇아지고 있으며, 또한 이러한 박막들이 다층으로 복잡하게 적층된 다층 박막의 응용이 높아지는 추세이다. 따라서, 반도체 및 광통신 소자, 발광소자, 바이오 칩 어레이 등과 같은 나노박막을 이용하는 산업에서는 박막의 두께 측정을 더욱 정확하고, 보다 빠르며 효율적으로 측정할 수 있는 박막 두께 측정용 계측기가 요구된다.(중략)

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.540-542
• /
• 2019

This paper proposes an open-phase fault control system using 3-phase neutral voltage. The proposed control system is designed as a new topology which uses the potential difference between neutral point and ground of three phase. The open-phase detection system is also configured to Y-wiring of three capacitance devices of the same capacity to each line of three phase power source R-S-T. This paper also designs a mobile phone application for remote alarm of open-phase fault.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.4-6
• /
• 2018

This paper proposes an open-phase fault control system using 3-phase neutral voltage. The proposed control system is designed as a new topology which uses the potential difference between neutral point and ground(G) of three phase. And the open-phase detection system is configured to Y-wiring of three capacitance devices of the same capacity to each line of three phase power source R-S-T. This paper also designs a mobile phone application for remote alarm of open-phase fault.

• Korean Journal of Optics and Photonics
• /
• v.34 no.6
• /
• pp.248-260
• /
• 2023

A 0.5-numerical-aperture (NA) refractive-reflective objective, composed of a low-NA refractive and a reflective focal reducer, is designed. A 0.25-NA Lister objective is used for the refractive. A two-spherical-mirror system, corrected for spherical aberration, coma, and astigmatism is used for the reflective focal reducer. In spite of high NA, the refractive-reflective objective has an 18-mm working distance and improved imaging performance, compared to the 0.25-NA Lister objective.

• Korean Journal of Optics and Photonics
• /
• v.32 no.6
• /
• pp.286-295
• /
• 2021

A modified catadioptric omnidirectional optical system (MCOOS) using an RGB/NIR CMOS sensor is optically designed for a capsule endoscope with the front field of view (FOV) in visible light (RGB) and side FOV in visible and near-infrared (NIR) light. The front image is captured by the front imaging lens system of the MCOOS, which consists of an additional three lenses arranged behind the secondary mirror of the catadioptric omnidirectional optical system (COOS) and the imaging lens system of the COOS. The side image is properly formed by the COOS. The Nyquist frequencies of the sensor in the RGB and NIR spectra are 90 lp/mm and 180 lp/mm, respectively. The overall length of 12 mm, F-number of 3.5, and two half-angles of front and side half FOV of 70° and 50°-120° of the MCOOS are determined by the design specifications. As a result, a spatial frequency of 154 lp/mm at a modulation transfer function (MTF) of 0.3, a depth of focus (DOF) of -0.051-+0.052 mm, and a cumulative probability of tolerance (CPT) of 99% are obtained from the COOS. Also, the spatial frequency at MTF of 170 lp/mm, DOF of -0.035-0.051 mm, and CPT of 99.9% are attained from the front-imaging lens system of the optimized MCOOS.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.38-43
• /
• 2002

Simple principles of self-imaging in Multi-Mode Interference (MMI) devices are based on the approximation of propagation constants. The analysis of the basic nature of the self-imaging principle reveals the problems of previous optimization methods, and provides a new scheme to optimize the external variables for the reconciliation of approximation problems by considering two different tendencies of approximation effects. Furthermore, the representative mode method is proposed to make the application easy. This optimization method provides an essential method for stable design and fabrication of MMI devices with improved characteristics.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.183-190
• /
• 1996

To design three-mirror telescope system (F/8, 120 inch in focal length) for visible and infra-red band imaging, methods for power configuring and correction of the third order aberrations were studied. In the design of the telescope system, a three-mirror system corrected for spherical aberration, coma, and astigmatism was used for infra-red imaging, and the aberrations were corrected by using conic surfaces. For visible imaging, a singlet corrector lens was appended at the front of the focal plane to correct filed curvature. The telescope system has diffraction limited performance for 10 ${\mu}{\textrm}{m}$ in wavelength within 2.4$^{\circ}$ of field-of-view. In the visible band imaging, the rms spot size of the telescope system is less than 25 ${\mu}{\textrm}{m}$ within 3$^{\circ}$ of field-of-view for monochromatic light, and the telescope system satisfies flat field condition for CCD application.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.9
• /
• pp.1094-1102
• /
• 2011

Recent trends for the miniaturization and weight reduction of portable electronic parts is the use of subminiature components. Assembly of the miniaturized components requires subminiature screws of which pitch sizes are in a micrometer scale. To produce such a subminiature screw with high precision threads, not only a precision forming technology but also high-precision measurement technique is required. In the present work, a vision inspection system is developed to measure the thread profile of a subminiature screw. Optical simulation based on a ray tracing method is used to design and analyze the optical system of the vision inspection apparatus. Through this simulation, optical performance of the developed vision inspection system is optimized. The image processing algorithm for the precision screw inspection is also discussed.