• Korea Real Estate Review
• /
• v.24 no.1
• /
• pp.39-52
• /
• 2014

This study examines the degree of global co-movement & spillover effect among the housing price of ten major countries of OECD including Korea, based on the 3 hypothesis. The data used in this study is quarterly house price index of OECD countries from 1975 to 2012. VAR model is used to analyze the co-movement, and Granger causality methodology is used for the analysis of Spillover Effect. It is found that entire period of study is that the global house prices showed the co-movement, but the coefficient was weak. Since 2008 global financial crisis, the co-movement increased significantly and the adjusted R-square of this model increased 78% compared to the entire period (1975-2012). In general, all hypotheses in this study were significant, and the common shock hypothesis were most significant. In case of Korea, the degree of co-movement was weak compared to the other countries and spillover effect was independent since 2008.

• The korean journal of orthodontics
• /
• v.33 no.5 s.100
• /
• pp.339-350
• /
• 2003

The purpose of this study was to investigate the micro-implant height and anterior hook height to prevent maxillary six anterior teeth from lingual tipping and extruding during space closure. We manufactured maxillary dental arch form, bracket and wire, using the computer aided three-dimensional finite element method. Bracket was $.022'{\times}.028'$ slot size and attached to tooth surface. Wire was $.019'{\times}.025'$ stainless steel and $.032'{\times}.032'$ stainless steel hook was attached to wire between lateral incisor and canine. Length of hook was 8mm and force application points were marked at intervals of In. Four micro-implants were implanted on alveolar bone between second premolar and first molar. The heights of them were 4, 6, 8, 10mm starting from wire. We analyzed initial displacement of teeth by various force application point applying force of 150gm to each micro-implant and anterior hook. The conclusions of 4his study are as the following : 1. When the micro-implant height was 4m and the anterior hook height was 5mm and below, anterior teeth were tipped lingually. When the anterior hook height was 6mm and above, anterior teeth were tipped labially. 2. When the micro-implant height was 6mm and the anterior hook height was 6mm and below, the anterior teeth were tipped lingually. When the anterior hook height was 6m and above, the anterior teeth were tipped labially. But lingual tipping of anterior teeth decreased and labial tipping Increased when the micro-implant height was 6mm, compared with 4mm micro-implant height. 3. When the micro-implant height was 8mm and the anterior hook height was 2mm, the anterior teeth were tipped lingually. When the anterior hook height was 3mm and above, labial tipping movement of the anterior teeth increased proportionally. 4. When the micro-implant height was 10mm and the anterior hook height was 2mm and above, labial tipping of the anterior teeth increased proportionally. 5. As the anterior hook height increased, aterior teeth were tipped more labially. But extrusion occurred on canine and premolar area because of the increase of wire distortion. 6. Movement of the posterior teeth was tipped distally during maxillary six anterior teeth retraction using micro-im plant because of the friction between bracket and were Based on the results of this study, we could predict the pattern of the tooth movement according to position of micro-implant and height of anterior hook. It seems that we can find the force application point for proper tooth movement in consideration of inclination of anterior anterior teeth, periodontal condition, overjet and overbite

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.403-414
• /
• 1995

The purpose of this study was to investigate the histologic changes in mandibular periodontium during overbite closure for openbite treatment by continuous arch wires and anterior vertical elastics. Two female monkey(Macaca nemestrina) with permanent dentition were used. Posterior bite block was fixed to each of their maxillae, which made the animal temporary anterior openbite as well as stabilized the whole maxillary anchorage. In each mandible, all the teeth except the second molars which had been extracted, were prepared for cast crowns. 018 inch Standard brackets were welded on these crowns. After cementation, two types of the $016{\times}022$ inch continuous arch wires, the plain ideal arch to the control animal and the MEAW(multiloop edgewise archwire) to the other experimental one were inserted. Then anterior vertical elastics were applied for two weeks. The overbite depth changes in the monkeys and histologic examinations of the mandibular periodontiums suggested the following conclusions. 1. During two weeks of the experimental period, the overbite increased + 0.3 mm in the control and + 1.3 mm in the experimental one. 2. In both the control and the experimental animal, histologic examinations showed that incisors, canines and first premolars were subject to extrusive force and the rest of posteriors were subject to intrusive one. 3. In periodontiums of the extruded incisors of the experimental one, reorientation of the periodontal fiber structures reflected the direction of force and the alveolar bone surfaces including apical and crestal areas which had been subject to tension, were the front of new bone formation. 4. In periodontiums of the extruded incisors of the experimental one, neither excessive hyalinization nor gross root resorption was observed. 5. Alveolar bone remodeling of anteriors and posteriors was more remarkable in the experimental one than the control.

• Journal of the Korean association of regional geographers
• /
• v.5 no.1
• /
• pp.25-75
• /
• 1999

This study concern with the pattern of Pusan Station Shopping District within Pusan City, Korea, one of the third ranked centers within Pusan-the first ranked is CBD, the second is subCBD, the third are Spa Shopping district, Tongnae shopping district, Jobang-Ap shopping district and Yangjeong shopping district. This paper serves as a part of series studies which attempt to clarify the internal structure of Pusan as a whole. Part(I) of this study deals with the pattern of functions including information & culture, business, recreation and retailing. The results are as follows. 1. Pusan Station is one of higher ranked class of central places within Pusan City. But the ratio of dwelling houses is the highest in Pusan Station among the 9 higher ranked central places within Pusan. It means that the residential areas still remain along the maze type of narrower streets inner part of the blocks, especially western belt of this shopping district. 2. Business functions are one of the important criteria which classified the central places within the city and Pusan Station is the first ranked shopping districts in terms of these criteria among the 9 higher ranked central places including CBD within Pusan City. It suggests that Pusan Station is the miniature of the CBD, SubCBD is not the miniature of CBD in the view point of business function. It also means that Pusan Station Shopping District has been developed as a special shopping district or as a special central place. It has not been evolved as a center of the hierarchy of central places within the city by the natural or organic growth. 3. Pusan Station as 'the third space or drinking place' and it's characteristics as a amusement center presents at so called the 'Texas Town'-free tax area- whose customers are mainly U. S. soldiers and foreign sailors. But from the 1990s, this 'Town' changed to 'Russian Town', You can easy to meet many Russians and Russian lettered signboards-not English- along the street. 4. Convenient stores distribute mainly at back streets or along the narrower streets. It means that this kinds of stores have a residential oriented character. And a certain convenient stores locate with almost same distances. It suggests that it's hinterland is limited in nearer neighborhoods.

• Korean Journal of Agricultural Science
• /
• v.5 no.2
• /
• pp.149-157
• /
• 1978

This study was carried out to obtain basic data for the type selection of furrow openers for the no-tillage soybean planter trailed by the two-wheel tractor from the standpoint of minimum draft and good performance of furrowing. For this study, two models of furrow opener, hoe and disc type, were tested on the artificial soil stuffed in the moving soil bin. The results obtained were as follows. In the case of disc furrow opener, the drafts were measured according to various diameters of discs under the condition of disc angle $8^{\circ}$ and $16^{\circ}$, working depth 3cm and 6cm, working speed 2.75cm/sec. Minimum draft appeared when the diameter of disc was about 28cm and the drafts increased as the diameter of discs became larger or smaller than this diameter. Specific draft showed almost same tendencies as above but showed the minimum when the diameter was about 30cm. For the purpose of controlling the seeding depth, the relationships between draft and working depths, 3cm and 6cm, were tested. The variations of draft concerning the various working depths showed linear changes and were affected in higher degree by depths than other factors. There were general tendencies at both working depths, 3cm and 6cm, that total draft showed the minimum with the disc diameter of about 28cm and specific draft showed it with the disc diameter of about 30cm regardless of disc angle and working speed. For the purpose of controlling the working width and speed, the relationships among drafts, disc angle and working speed were investigated and there were general tendencies that the draft increased as the angle and speed were increased and the draft was affected more by speed than by angle. To compare the hoe-type with disc-type opener, the specific drafts of hoe openers were compared with those of disc opener of $16^{\circ}$ angle and 30cm diameter. The specific draft of disc-type opener with the diameter of 30cm was $0.35{\sim}0.5kg/cm^2$, while $0.71{\sim}1.02kg/cm^2$ in the case of hoe type with the lift angle of $20^{\circ}$ which is 2 times as much as that of disc type in average value. And the furrows opened by disc openers were cleaner than those opened by hoe openers.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.235-240
• /
• 2018

ICT converged smart factory started from German Industry 4.0 has been the driving force for the $4^{th}$ Industrial Revolution and the center of manufacturing innovation for major industrial countries. It will be developed according to industry characteristics of each country. Korea is relatively later than other competing countries in the smart factory area. So, the government is establishing related policy and tendering all sorts of supports for smart factory mainly to the small and medium-sized enterprises to spread over the manufacturing industry. It is necessary for government to categorize among similar manufacturing industry and make them share digitalized production information mutually. It will be more effective method for securing global competitiveness than the uniform support. Also, large companies need to establish cloud based production forecasting system over similar industry and share it with other companies rather than expansion of individual smart factory. Mutual development in the manufacturing industry will be realized when the small and medium-sized enterprises and large companies take part in the cooperating ground of smart factory.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.537-544
• /
• 2010

Anchorage control in orthodontic treatment is an important factor affecting treatment results. In the conventional approach, intra-oral anchorage such as application of differential force and moment, Nance holding arch and lingual arch, as well as extra-oral anchorage such as head gear were used for anchorage reinforcement. However, these anchorages may result in undesired tooth movement and require patient cooperation. To overcome these disadvantages, skeletal anchorage system was introduced as orthodontic anchorage. Types of skeletal anchorage include implant, onplant, miniplate and miniscrew. Especially, miniscrew has many advantages such as reduced patient cooperation, low cost and easy placement. Recently, it is successfully used in orthodontic treatment. This cases were treated using orthodontic miniscrews for retraction of ectopically erupting maxillary canine and impacted mandibular canine and intrusion of maxillary incisors.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.33-48
• /
• 1977

Transporting agricultural products and the other material by the two-wheel-tractor (power-tiler)and trailer system may be one of its most widely used farming functions.The safety and hitching load for all the previaling performing conditions may be the general concern over the operation of the tiller-trailer system. In this study, a mathematical model to determine the static and dynamic forces excerting on the hitch point were developed . Based on the analysis of the model and the field measurements. the limiting hitching load and critical slope were analyzed. The results of the study are summarized as follows ; 1) The limit angle of slope land for the safety steering that two-wheel tractor-single axle trailer system was able to transport agricultural products was the direct angle (${\gamma}$) = 8 ; the cross angle$\beta$) 15 ; and it was decreased in accordance with the increase of carrying load ($W_4). 2) The critical velocity for safe operation in case of running on downward hill road was about 1.08m/sec. 3) The limiting carrying load for the safe steering was W$_4$=600kg. The degree of the safe steering for different braking methods was given in order as follows ; Simulataneous braking the tractor and trailer , braking the trailer only, and braking tractor only. 4) Among the three components of impact loads excerting on the hitch point, the component in the lateral direction ($P_{Vy}$) was near zero in spite of increase of hitching load ($W_4) , while the components in the other two mutually perpedicular directions ($P_{Vx}$ and ($P_{Vz}$) ) had larger values in horizontal plane than those in the slope lands. 5) Moment of forces on the lateral direction (M$y$) had the largest value among the three components of impact moment acting on the hitch point, however all the components were sharply increased in accordance with the increase of hitching loads ($W_4. Three components of the moment were the negative values.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.3
• /
• pp.399-422
• /
• 2010

Global expansion of regulation for carbon emission has brought new industrial regulations and trade barriers while the global economy is promoting economic stimulus through a variety of green investments such as renewable energy development, energy efficiency increase, and environmental improvement simultaneously. Korean government is trying to seek a new opportunity to grow through green investment in this change of business environment and businesses are facing the transition to low-carbon and eco-friendly structure for their survival. It is promoting not only industry structure changes and conversion but also demanding changes of workforce composition and requirement skills. In response to convergence of green economy, manpower development for future skills needs is provided the main impetus for response as well as promotion green growth. This study will analyze human resource development plan due to future skills needs emphasizing on automative industry. Also the study will be researched on the problems of present curriculum of undergraduate and look for improvements tasks. Upon the result, promotion plans for human resource development in other sectors of green car in response to future skills needs in green growth can be found.

• Proceedings of the Technology Innovation Conference
• /
• 2003.02a
• /
• pp.81-100
• /
• 2003

최근 이동통신기술이 급속히 발달함에 따라 국내는 물론 전세계 이동통신업계는 제 3세대 이동통신서비스의 성공여부에 많은 관심을 쏟고 있다. 지금까지의 이동통신산업의 성장이 빠른 기술개발에 의존한 기술추동적(technology-push) 성격을 지녔다면, 이동통신시장이 포화상태에 근접하고 있는 최근에는 서비스 및 장비 양면에서의 경쟁이 치열해 짐으로써 소비자의 기술에 대한 선택이 더욱 중요해짐에 따라 수요견인적(demand-pull) 기술혁신이 예상된다. 따라서, 이동통신서비스의 확대에 따른 특정기술에 대한 소비자의 선호에 대한 올바른 판단이 향후 산업의 기술진화방향을 예측하는데 핵심적인 역할을 할 것으로 생각된다. 현재 이동통신기술의 진보의 키워드는 '멀티미디어화'이다 향후 VOD (Video On Demand) 등 비디오 스트리밍(video streaming) 기술을 이용한 동영상 서비스, 화상전화, 타 디지털기기(예를 들어 PDA, 디지털 카메라 등)와의 융합 등의 서비스가 본격화되고 차세대 이동통신망의 구축이 가시화됨에 따라 이동통신의 멀티미디어 기능은 더욱 주목받게 될 것이다. 따라서 이동전화 단말기 창의 컬러화는 이러한 이동통신기술의 새로운 패러다임을 떠받치고 있는 가장 중요한 이정표로서의 의미를 지니고 있다. 본 연구에서는 표시1창의 컬러화로 실현되는 기술혁신요소에 대해서 소비자가 부여하는 가치를 분석하고자 한다. 하지만, 컬러 단말기의 보급이 초기단계에 머무르고 있는 연구시점의 특성상 현시자료가 가용하지 않았기 때문에, 소비자에게 가상의 품질특성을 지닌 제품 조합을 제시하고 이에 대해 소비자가 순위를 매기게 함으로써 소비자의 선호를 측정하는 컨조인트(conjoint) 방법론을 사용하였으며, 소비자의 진술선호(stated preference)에 기초하여 이동통신단말기의 개별 특성에 대한 부분가치와 보상잉여를 측정하였다. 또한, 이를 통해 창의 컬러화로 인해 기대되는 초과이윤의 가능성 등 경제적인 효과들을 정량적으로 분석하고, 브랜드 가치 등 기존의 단말기 경쟁력 요소들과의 비교를 통하여 컬러화가 가져다 줄 경쟁요소들을 추정함으로서, 기술확산 메커니즘을 확인하고자 한다.