• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.157-165
• /
• 1994

A general-purpose program for automatic two-dimensional finite-element modelling with quadrilateral elements was developed in this research. The conventional looping method employed in the program was introduced with emphasis on a new splitting criterion and a splitting scheme developed for improving the method. Some application examples were given, which show versatility and applicability of the developed program.

• Journal of Korea Water Resources Association
• /
• v.38 no.3 s.152
• /
• pp.245-257
• /
• 2005

The purpose of the present study is examining the changes of runoff characteristics and extracting hydrologic parameters by applying ModClark model on grid divided watershed. Bocheong stream basin in Geum River system, one of the representative watersheds of IHP projects, is selected. Hydrology-based topographical informations are calculated using GIS data in the HEC-GeoHMS V1.1 extension in Arcview 3.2. The ModClark model requires precipitation data in a gridded format. The gridded data must be recorded in the HEC Data Storage System file format. Therefore, kriging method was used to interpolate the point values to create a grid that gives each cell over the entire watershed a precipitation value. Hec-DSSVue program was used to create DSS file for the rain gage data. The completed HEC-HMS model was calibrated for use in simulating three measured storm events and cell size of 10000m, 5000m, 2000m, 1000m was chosen for the application. As the result of applying distributed rainfall-runoff model to analyze relatively good agreement for peak discharge, runoff volume and peak time.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.653-655
• /
• 1998

본 논문은 3차원 지형을 현실감 있고 효율적으로 구축하기 위하여, 등고선 데이터로부터 지형의 특징점을 추출하고 이를 이용하여 3차원 지형 데이터를 복원하는 방법을 제안한다. 래스터 기반의 거리변환기법 알고리즘을 사용하여 2차원의 등고선 데이터로부터 3차원 지형을 생성하며, 생성된 3차원 지형정보로부터 지형의 특징점을 추출한다. 복원된 3차원 지형을 격자망 형태로 시각화하는데, 이때 특징점의 높이정보를 이용함으로써 지형을 표시하는데 요구되는 정보의 크기를 감소시킨다. 제안한 방법은 사용자가 상호대화식으로 수행할 수 있는 프로그램으로 윈도우 환경의 PC상에서 구현되었다. 이 프로그램의 실험결과는, 기존의 방법보다 적은 데이터양으로 3차원 지형을 시각화할 수 있음을 보여준다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.3
• /
• pp.113-122
• /
• 2007

The rapid growth of aerial survey and remote sensing technology has enabled the rapid acquisition of very large amounts of geographic data, which should be analyzed using real-time visualization technology. The level of detail(LOD) algorithm is one of the most important elements for realizing real-time visualization. We chose the triangulated irregular network (TIN) method to generate normalized digital elevation model(DEM) data. First, we generated TIN data using contour lines obtained from a two-dimensional(2D) digital map and created a 2D grid array fitting the size of the area. Then, we generated normalized DEM data by calculating the intersection points between the TIN data and the points on the 2D grid array. We used constrained Delaunay triangulation(CDT) and ray-triangle intersection algorithms to calculate the intersection points between the TIN data and the points on the 2D grid array in each step. In addition, we simulated a three-dimensional(3D) terrain model based on normalized DEM data with real-time visualization using a Microsoft Visual C++ 6.0 program in the DirectX API library and a quad-tree LOD algorithm.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.933-933
• /
• 2012

최근 들어 우리나라를 포함한 전 세계적으로 극심한 기후변화와 기상이변으로 집중호우에 의한 피해가 급증하고 있으며, 기상재해에 따른 강우-유출 현상에 관한 정확한 해석이 필요하게 되었다. 국내의 경우에도 1990년 중반부터 매년 국지적 집중호우나 이상호우로 인해 재산 및 인명피해가 속출하고 있다. 대상유역으로 선정한 우이천 유역 또한 강북구의 대표적인 상습침수지역으로 피해 받고 있는 상황이며, 이를 예방하기 위해 홍수범람도 작성, 재해지도 작성 등의 지리정보시스템 기법 및 각종 수해대책이 활발하게 진행되고 있지만 아직은 미비한 실정이다. 본 연구에서는 우이천 유역에 대한 강우-유출 해석을 위한 분포형 모형인 Vflo$^{TM}$의 적용성을 검토 분석하는 데에 의의를 두었다. 또한 각 격자크기별로 유출량의 변화를 타 모형과의 비교를 통하여 적정성을 검토하였다. 이를 위해 대상유역의 1:1000 수치지형도를 이용하여 50m, 100m, 150m, 200m의 DEM을 생성하였고 ArcGIS 프로그램의 Hydro툴을 이용하였다. DEM을 보간하기 전 총 세 곳의 Sink를 발견하여 조정한 후 Filling하였으며 수치지형도와 정밀토양도로부터 초기 입력자료를 생성한 후 ASCII 파일로 변환하여 분포형 모형에 적용하였다. 또한 VfloTM 를 통해 구성한 격자망을 실제 흐름 방향을 고려하여 최종 유출구로 흐를 수 있도록 격자망을 재구성하였으며, 강우의 공간적 분포 방법으로 Cokriging 기법을 사용하였다. 분석 결과 격자 크기가 작은 경우 오히려 첨두유량이 작게 산정되었는데 이는 배수계통의 변화 및 수치지형도와는 다른 지표면 특성으로 인한 것으로 사료된다. 또한 배수구역의 최적화 결과 전반적으로 실측치와 유사한 값을 나타내었으며, 타 모형과 비교한 결과 비슷하거나 조금 나은 결과를 보였다.

• 한국전산유체공학회:학술대회논문집
• /
• 2001.10a
• /
• pp.157-163
• /
• 2001

In the present study a mesh generation program is developed for three dimensional flow analyses with complex geometry. By the present program one can define vertices using various coordinate systems and cells for finite volume approach. Rendered display of the generated mesh can be also available in both orthographic and perspective projection modes. Through perspective projection mode, one can check the quality of generated mesh by moving around inside the mesh like a virtual reality. The examples of the program execution is given in the paper.

• Journal of computational fluids engineering
• /
• v.5 no.2
• /
• pp.28-37
• /
• 2000

An integrated grid generation has been developed for a Navier-Stokes simulation of flow fields inside multistaged turbomachinery The internal grids are generated by the combination of algebraic and elliptic methods. The interactive mode of the present system is coupled efficiently with the design results and flow solvers. Application to several types of axial-flow turbomachines was demonstrated to be reliable and practical as the pre-processor of the computational fluid engineering for gas turbine engines.

• The KSFM Journal of Fluid Machinery
• /
• v.1 no.1 s.1
• /
• pp.7-16
• /
• 1998

An interactive mode of grid generation system has been developed for a Navier-Stokes design procedure of axial flow compressors. The present grid generator adopts the multiblock H-grid structure, which simplifies the creation of computational grids about complex turbomachinery geometries and facilitate the manipulation of multiple grid blocks for multirow flow fields. The numerical algorithm adopts the combination of the algebraic and elliptic method to create the internal grids efficiently and quickly. The system consists of four separated modules, which are linked together with a common graphical user interface. The system input is made of the results of the preliminary design. The final grids generated from each module of the system are used as the preprocessor for the performance prediction of the two-or three-dimensional flow simulation inside the blade passage. Application to the blade design of the LP compressor was demonstrated to be very reliable and practical in support of design activities. This customized system are coupled strongly with the design procedure of the turbomachinery cascades using the Navier-Stokes technique.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.496-499
• /
• 2004

컴퓨터와 다양한 software의 보급과 함께 흐름의 수치해석 분야는 급속한 발전을 보게 되었고 고도의 수치해법이나 복잡한 경계 처리 등을 통해 실제현상과 같은 흐름해석을 가능케 하고 있으며, 이러한 수치해석을 위해 정확한 Bathymetry는 필수적이다. 본 연구에서는 등 격자간격의 수심도 생성을 위하여 전자해도를 작업에 적합하게 수정하고 부족한 조간대의 수심자료는 보완하고, 파일형식에 따른 적절한 프로그램밍 언어를 통하여 해도상 지점들의 수심자료를 획득하고 내삽하여 기존에 사용되는 방법에 비하여 비교적 간단하고 해도의 정보를 정확하게 반영하는 Bathymetry를 생성하는 기법을 제안하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.335-340
• /
• 2010

In this paper development of an automatic grid generation program for flow field calculation around 3D wing is described and its application is also introduced. The program is developed by using JAVA programming language and a graphic library, JOGL, and it can be usee either as an application program on a local computer or as a applet in the network environment. Currently, The program provides NACA series 4-digit airfoils as the wing cross-section shape and it offers a non-complicated GUI program which can easily generate structured grids for wings based on user's parameter input. Grid generated by the program can be selected as one of two types; O-type and C-type. In this research advancing layer method(ALM) augmented by elliptic smoothing method is used for the FLUENT. It is shown that by using current program high-quality structured grids around 3D wings can be easily generated, and typical grid generation results and flow solutions are demonstrated. Study on effects of geometric parameters on flow field is also tried by changing major wing parameters such as incidence angle type of wing-tip and sweepback angle.