• Journal of computational fluids engineering
• /
• v.9 no.2
• /
• pp.52-61
• /
• 2004

In the present study, a solution algorithm for the computation of unsteady flows on unstructured meshes is presented. Dual time stepping is incorporated to achieve the second-order temporal accuracy while reducing errors associated with linearization and factorization. This allows any time step size, which is suitable for considering physical phenomena of interest. The Gauss-Seidel scheme is used to solve the linear system of equations. A special treatment based on spring analogy is made to handle meshes with high aspect-ratio cells. The present method was validated by comparing the results with experimental data and those obtained from rigid motion.

• Journal of Korean Society of Transportation
• /
• v.6 no.2
• /
• pp.21-33
• /
• 1988

부적정한 도로포장 구조물의 설정 및 유지보수의 적정관리 미흡으로 표면의 피해와 소성변형이 장기간 발생된다. 이로 인한 가요성 통제 구조물의 파괴 원인은 일반적으로 포 장재료의 동질성, 선형탄성 상태의 가정 하에서 분석되었다. 그러나 아스팔트 재료의 특성은 엄밀히 분석해서 완전한 선형탄성이라고는 볼 수 없음은 잘 알려져 있다. 따라서 근본적으 로 포장체의 수명과 파양 예측에 오류 발생가능성이 높다 하겠다. 금번 연구는 이와 같은 종전의 경험적인 선형탄성 방법이 아닌 탄성일소성 상태하의 격자(mechano-lattice) 이론이란 새로운 기법을 도입하였다. 특히 마이너(Miner's Law) 이론의 누적손실과 확률을 적용하여 포장체의 피노수명과 손실을 예측할 수 있다. 금번 이론은 실제로 호주 빅토리아주의 멜보른(Melbourne)시 일부 지역구간을 모형으 로 선정되었다. 분석결과 가장 최적화된 도로포장 각층의 두께와 재료 선정을 하기 위하여 일정기간의 교통량, 상대적 손실지수와 잔여응력 및 표면 변위, 대기온도 그리고 습도의 영 향을 종합적으로 고려하여야 한다.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.560-565
• /
• 2016

최근 대형 컨테이너선의 개발이 지속적으로 이루어짐에 따라 슬래밍에 의한 선수 및 선미의 구조안정성 문제가 대두되고 있지만 설계 단계에서 슬래밍에 대해 고려하기에는 현상의 복잡성으로 인해 어려움이 많았다. 이를 위해 KRISO에서 시행된 WILS JIP의 선수 단면 형상 및 선미 단면인 쐐기 형상으로 격자를 생성하여 EDISON CFD 다상유동 해석자를 통해 수치해석을 시도하였다. 기존 방식과 달리 계산 시간 절감을 위하여 격자 변형 기법을 적용하지 않고 모형 시험결과를 기반으로 한 유입류 조건을 설정하여 입수 충격 문제를 해석해보았다. 그 결과, 선미 형상의 경우 선행연구와 유사하게 실험 결과에 근접한 유체 충격력을 정량적으로 얻어낼 수 있었다. 선수 형상의 경우에서는 구상 선수로 인해 파생되는 센서 위치별 충격력의 변화를 확인할 수 있었으며, 실제 유동에 가까운 유동 형상과 슬래밍에 의한 충격력을 개략적으로 구할 수 있었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.13-13
• /
• 1999

본 논문에서는 해석영역의 형상변화, 즉 로켓노즐 내열재의 삭마로 인해 야기된 경계 면의 이동을 고려하면서 2차원 비정상 비등방성 재료의 열전달 문제를 해석할 수 있는 수치해석에 대해 기술하였다. 수치해석 알고리즘은 유한요소법이며 열해석시 경계면 이동으로 인한 격자계의 절점 좌표점이 계산과정 동안에 이동하는 변형 가능한 유한요소격자(transformable finite-element grid)를 사용하였다. 본 수치해석기법의 타당성 입증을 위해 극심한 열하중이 부여된 조건하에서 엄밀해가 존재하는 비정상 축대칭문제 및 고체로켓 노즐내열재에 대해 열해석을 수행하였으며, 그 결과 수치해는 엄밀해 또는 실험치와 잘 일치함을 보이었다. 여러 가지 복합재로 구성된 내삽노즐 또는 외삽노즐에 대해서도 안정된 수치해를 얻을 수 있었다. 아울러 노즐목삽입재로 탄소-탄소 복합재를 적용한 고체추진기관 내삽노즐을 해석모델로 택하여 열전달 해석을 수행하고 해석결과를 분석하였다. 노즐의 표면산화반응에 대한 열반응상수, 즉 Arrhenius 형태로 표시된 식에서 pre-exponential factor 및 activation energy 변화가 탄소-탄소 복합재 및 탄소-페놀릭 복합재의 삭마량에 미치는 영향에 대해서 고찰하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.613-620
• /
• 2017

A metal-coated FBG (fiber Bragg grating) sensor has a memory effect, which can recall the maximum strains experienced by the structure. In this study, a nickel-coated FBG sensor was fabricated through electroless (i.e., chemical plating) and electroplating. A thickness of approximately $43{\mu}m$ of a nickel layer was achieved. Then, we conducted cyclic loading tests for the fabricated nickel-coated FBG sensors to verify their capability to produce residual strains. The results revealed that the residual strain induced by the nickel coating linearly increased with an increase in the maximum strain experienced by the sensor. Therefore, we verified that a nickel-coated FBG sensor has a memory effect. The fabrication methods and the results of the cycle loading test will provide basic information and guidelines in the design of a nickel-coated FBG sensor when it is applied in the development of structural health monitoring techniques.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.2
• /
• pp.97-104
• /
• 2005

A simple but efficient grid generation technique by using the modified compressible form of stream function has been formulated. Transformation of a physical plane to a streamline plane, the Von Mises Transformation, has been widely used to solve the differential equations governing flow phenomena, however, limitation arises in low velocity region of boundary layer, mixing layer and wake region where the relatively large grid spacing is inevitable. Modified Von Mises Transformation with simple mathematical adjustment for the stream function is suggested and applied to solve the confined coaxial turbulent jet mixing with simple $\kappa-\epsilon$ turbulence model. Comparison with several experimental data of axial mean velocity, turbulent kinetic energy, and Reynolds shear stress distribution shows quite good agreement in the mixing layer except in the centerline where the turbulent kinetic energy distributions were somewhat under estimated. This formulation is strongly suggested to be utilized specially for free turbulent mixing layers in axisymmetric flow conditions such as the investigation of mixing behavior, jet noise production and reduction for Turbofan engines.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.8
• /
• pp.677-682
• /
• 2015

We simulate an emulsion system under simple shear rates to analyze its rheological characteristics using the lattice Boltzmann method (LBM). We calculate the relative viscosity of an emulsion under a simple shear flow along with changes in temperature, shear rate, and surfactant concentration. The relative viscosity of emulsions decreased with an increase in temperature. We observed the shear-thinning phenomena, which is responsible for the inverse proportion between the shear rate and viscosity. An increase in the interfacial tension caused a decrease in the relative viscosity of the decane-in-water emulsion because the increased deformation caused by the decreased interfacial tension significantly influenced the wall shear stress.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.56-61
• /
• 2009

According to the target object for designer to sketch, an effective style or shape of input device can be defined differently. The general spatial sketching system that support various types of wand assist sketching effectively as changing suitable wand shape to the part of a target object. We suggest the idea of changing wand style by altering the posture of a 3D wand. This allows a designer to work in an intuitive way without being interrupted by complicated menus. We implement the various wand styles to the spatial sketching system with cubic-based drawing technique.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.7
• /
• pp.60-68
• /
• 2004

High velocity impacts are accompanied with large deformations, which generate a large amount of heat due to plastic works, resulting in a significant temperature rise of the material. Because the elevated temperature affects the dynamic properties of materials, it is important to predict the temperature rise during high-stram-rate deformations. Both existing vacancies and excess vacancies are credited to the stored energy, yet it is difficult to distinguish one from another in contribution to the stored energy using macroscopic level materials models. In this study, an atomistic material model for fee materials such as copper is set up to calculate the stored energy using molecular dynamics (MD) simulations. It is concluded that excess vacancies play an important role for the stored energy during a high-strain-rate deformation.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.1
• /
• pp.111-117
• /
• 2010

A three-dimensional numerical model is employed to investigate wave deformation due to a submerged structure. The three-dimensional numerical model solves the spatially averaged Navier-Stokes equations for two-phase flows. The LES(large-eddy-simulation) approach is adopted to model the turbulence effect by using the Smagorinsky SGS(sub-grid scale) closure model. The two-step projection method is employed in the numerical solutions, aided by the Bi-CGSTAB technique to solve the pressure Poisson equation for the filtered pressure field. The second-order accurate VOF(volume-of-fluid) method is used to track the distorted and broken free surface. A simple linear wave is generated on a constant depth and compared with analytical solutions. The model is then applied to study wave deformation due to a submerged structure and the predicted results are compared with available laboratory measurements.