• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.2
• /
• pp.87-93
• /
• 2007

Generally, the analysis using Computational Fluid Dynamics(CFD) is necessary for aircraft design. However, the analysis using CFD, it requires a lot of computational time and cost. But we can reduce grid reconstruction time of analyzing the various models if we use dynamic mesh. In addition, dynamic mesh can be an efficient technique in aeroelastic analysis and design optimization problem because these problems need grid reconstruction process frequently.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.70-77
• /
• 1999

A new method for fabricating long fiber Bragg gratings(FBGs) using uniform phase mask is proposed. The proposed method is characterized by forming a number of subgratings sequentially in series and varying linearly the effective refractive index of each subgrating. The reflectivity of a 200mm long uniform FBG developed fabricated by the method is about 95%. Also, the bandwidth and dispersion slope of a 250mm long linear-chirped FBG developed here are ∼0.5nm and ∼4.965ps/nm respectively.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.340-344
• /
• 1997

We proposed and demonstrated a tunable wavelength optical add/drop multiplexer(OADM) employing piezoactuated fiber grating pairs and polarization beam splitters. We used piezostack act as a fiber stretcher, using the fact that the resonant wavelength of the grating can be controlled by the axial strain along the fiber grating. The polarization controlled configuration showed high stability because the reflected signals from the two identical gratings are dropped or added not by interference but by polarizations of the beams. We could add and drop not noly 1549.3nm signal channel(original gratings), but also 1550.1nm(tuned gratings) with PZT actuators and in both cases, we found that the rejection of adjacent channels was more than -26dB, and signal leakage at the gratings was less than -34dB.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.3
• /
• pp.190-195
• /
• 2003

For many coastal problems, such as wave transformation, tidal circulation, sediment transports and diffusion phenomena, we resort to numerical techniques. The representative numerical techniques are the method of finite differences and finite elements. The approximate algebraic equations, referred to as finite difference equations(FDEs), are subsequently solved at discrete grid points within the domain of interests. Therefore, a set of grid points within the domain, as well as the boundaries of the domain, must be specified. The generation of grids for FDEs, with uniform spacing, is very simple compared to that of finite elements. However, within a very complex domain, there are few grid generation tools we can use conveniently. Unfortunately, most of the commercial grid generation programs are developed only for finite element method. In this paper, grid generation method using digitizer, with uniform rectangular spacing, are introduced in detail. Didger and Surfer programs by Golden Software are necessary to produce comparatively accurate and simple depth data.

• Korean Journal of Optics and Photonics
• /
• v.31 no.4
• /
• pp.169-175
• /
• 2020

We design a polarization-independent dielectric multilayer thin-film diffraction grating for a spectral-beam-combining (SBC) system with a simple grating structure and low aspect ratio. To maintain the high quality of the SBC beam, we propose a multilayer mirror structure in which the wavefront distortion due to stress accumulation is minimized. Moreover, to prevent light absorption from contamination, an optimized design to minimize the grating thickness was performed. The optimally designed diffraction grating has 99.36% diffraction efficiency for -1st-order polarization-independent light, for incidence at the Littrow angle and 1055-nm wavelength. It is confirmed that the designed diffraction grating has sufficient process margin to secure a polarization-independent diffraction efficiency of 96% or greater.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.18-27
• /
• 2012

Optimal quantizers in conducting the entropy-constrained quantization for high bit rates have the lattice structure. The quantization process is simple due to the regular structure and various quantization algorithms are proposed depending on the lattice. In this paper, such a lattice vector quantization is implemented by using the sample-adaptive product quantizer (SAPQ). It is shown that several important lattices can be implemented by SAPQ and the lattice vector quantization can be performed by using a simple integer-transform function of scalar values within SAPQ. The performance of the proposed lattice SAPQ is compared to the entropy-constrained scalar quantizer and the entropy-constrained SAPQ (ECSAPQ) at a similar encoding complexity. Even though ECSAPQ shows a good performance at low bit-rates, lattice SAPQ shows better performance than the ECSAPQ case for a wide range of bit rates.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.55-58
• /
• 2009

본 논문에서는 독립적으로 구성된 유한요소 모델을 결합하기 위하여 계면에서 불일치 격자들을 처리하는 기법을 소개하고자 한다. 불일치 격자들로 인하여 요소들의 침투와 틈이 발생할 수 있고 일반적인 유한요소를 사용하면 계면에서 변위의 연속성과 하중전달 조건들을 만족시키기가 불가능하게 되는데 계면에서 정의된 계면요소를 사용하여 결합을 위한 조건들을 만족시킬 수 있게 된다. 요소들의 침투와 틈이 없는 연속적인 계면을 정의하고 여기에 부합하는 계면요소를 구성하며 유한요소 형상함수와 다른 계면요소 형상 함수를 사용하게 되면 독립적으로 구성된 분리 영역들을 자연스럽게 결합할 수 있게 된다. 계면요소는 연속성, 적합성, 완전성 등에서 유한요소와 유사한 특성을 갖으며 추가적인 자유도 없이 불일치 격자를 결합하게 된다. 계면요소법을 사용하여 분리된 영역의 결합이나 전체-국부 해석 그리고 유체-구조물 상호작용해석 등에 적용되어 유용한 방법으로 사용될 수 있게 된다.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.25-28
• /
• 2011

본 논문은 광학 격자 필름과 평행 렌즈를 이용하여 무안경 3D 디스플레이 시스템을 구현한 연구이다. 기존 패럴랙스 배리어 시스템에서는 시점에 따라 크로스토크가 발생하는 영역과 역 입체시 영역을 갖게 되는데 이는 시청자가 정확한 3D영상을 볼 수 없도록 한다. 이를 평행 렌즈를 이용하여 좌, 우안에 해당하는 영상을 평행하게 이동시켜 설계된 격자 필름의 위치에 맺힐 수 있게 하고 격자 필름으로 빛을 굴절시켜 각 눈에 해당하는 영상만 볼 수 있는 영역을 갖게 하였다. 제안하는 방법을 이용해 크로스토크를 회피하여 보다 정확한 3D영상을 볼 수 있도록 한다.

• Composites Research
• /
• v.30 no.6
• /
• pp.356-364
• /
• 2017

Composite lattice structures are tried to be used in various fields because of its benefit in physical properties. With increase of demand of the composite lattice structure, nondestructive testing technology is also required to certificate the quality of the manufactured structures. Recently, research on the development of the composite lattice structure in Republic of Korea was started and accordingly, fast and accurate non-destructive evaluation technology was needed to finalize the manufacturing process. This paper studied non-destructive testing methods for composite lattice structure using laser ultrasonic propagation imaging systems. Pulse-echo ultrasonic propagation imaging system was able to inspect a rib structure wrapped with a skin structure. To reduce the time of inspection, a band divider, which can get signal in different frequency bands at once, was developed. Its performance was proved in an aluminum sandwich panel. In addition, to increase a quality of results, curvature compensating algorithm was developed. On the other hand, guided wave ultrasonic propagation imaging system was applied to inspect delamination in a rib structure. To increase an area of inspection, multi-source ultrasonic wave propagation image was applied, and defects were successfully highlighted with variable time window amplitude mapping algorithm. These imply that ultrasonic propagation imaging systems provides fast and accurate non-destructive testing results for composite lattice structure in a stage of the manufacturing process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.253-258
• /
• 2012

The Cartesian grid system has generally been used in casting simulations, even though it does not represent sloped and curved surfaces very well. These distorted boundaries cause several problems, and special treatment is necessary to resolve them. A cut cell method on a Cartesian grid has been developed for the simulation of threedimensional mold filling. Cut cells at a cast/mold interface are generated on Cartesian grids, and the governing equations are computed using the volume and areas of the cast at the cut cells. In this paper, we propose a new method based on the partial cell treatment (PCT) that can consider the cutting cells which are cut by the cast and the mold. This method provides a better representation of the surface geometry, and will be used in the computation of velocities that are defined on the cell boundaries in the Cartesian gird system. Various test examples for several casting process are computed and validated.