• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.77-82
• /
• 2004

A new anisotropic mesh refinement method is proposed. The new method is based on a simple second order interpolation error indicator. Therefore, it is methodologically direct and intuitive as compared with traditional anisotropic refinement strategies. Moreover, it does not depend on the mesh type. The error indicator is face-wisely calculated for all faces in a mesh and the cell refinement type is determined by the configuration of face markings with a given threshold. For the sake of simplicity, an application for a poisson equation on a triangle mesh is considered. The error field and resultant mesh refinement pattern are compared and effects of the threshold selection are discussed. Applying anisotropic refinement with various thresholds, we observed higher convergence rates than those in the uniform refinement cases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.4B
• /
• pp.447-456
• /
• 2001

본 논문에서는 DS-확산대역 시스템에서 격자형 IIR 노치필터를 이용하여 협대역 간섭신호를 제거한다. 이를 위하여 우선 갑섭신호의 주파수와 파워가 격자형 IIR 노치필터에 의ㅏ형 추정된다. 그리고 또 다른 IIR 노치필터를 수긴기 닾에 위치시키고 노치의 위치가 추정된 갑섭신호의 주파수에 있도록 한다. 그러나 단워원 위에 영점이 존재하는 IIR 노치필터는 간섭신호 뿐만 아니라 노치부분의 신호 성분도 제거하므로 데이터의 왜곡이 발생하게 된다. 따라서 이러한 데이터의 왜곡을 줄이기 위해서 필터의 노치 깊이를 조절하는 알고리듬을 개발하였다. 이를 위해 노치필터 출력의 신호 대 잡음비를 필터 파라미터에 대한 식으로 유도하고 이를 최대로 하는 최적의 노치 깊이를 구하였다. 시뮬레이션 결과 제안한 알고리듬이 기존의 FIR 노치필터나 FIR LMS 알고리듬에 비해 좋은 성능을 갖는다는 것을 확인할 수 있다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.26-27
• /
• 2000

층 성장 방향으로 정전기장을 걸어준 GaAs/AlGaAs 초격자 반도체에서, 두 개의 100 fs 광학 펄스에 의해 생성된 four-wave-mixing(FWM) 신호의 dephasing 현상을 반도체 블록 방정식을 사용해서 분석하고자 한다. 이 FWM 신호의 이완은 전하-전하와 전하-포논 충돌과 같은 phase-breaking 충돌 과정들에 의해서 야기되는 비선형적인 광분극의 dephasing에 의해서 결정되어 진다.$^{(1)}$ 이 비선형적인 광분극은 펄스들에 의해서 동시에 여기되어 나타나는 자유전하 분극과 엑시톤 분극으로 구성되는데, 이 두 분극의 이완시간 특성은 서로 다른 거동을 보인다.$^{(2,3)}$ GaAs/AlGaAs 초격자 반도체에서 이 자유 전하 분극의 dephasing이 엑시톤 분극의 dephasing 보다 훨씬 빠르게 일어나고, 엑시톤이 자유 전하의 특성을 갖게 될수록, 즉 온도가 높을수록 또 엑시톤이 3차원의 특성을 가질수록 이 dephasing은 빠르게 일어난다.$^{(4)}$ (중략)

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.618-621
• /
• 2008

In this paper a new smoothing method of unstructured viscous grid which can be useful when the ALM(Advacning Layer Method) method is used to generate volume grids of prism cells starting with unstructured triangular surface grids. According to the new method two layers of prism cells in the advancing direction which are found by the vector smoothing method are first generated, and then the position of nodes along the middle layer are adjusted by using spring analogy. It is found that the proposed method improves grid quality of the unstructured viscous volume grids for body shape with convex and concave corners.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.11
• /
• pp.759-765
• /
• 2017

In this study, a three-dimensional least-square, level-set-based two-phase flow code was developed for the simulation of three-dimensional sloshing problems using finite element discretization. The code was validated by solving some benchmark problems. The proposed method was found to provide improved results against other existing methods, by using a coarser mesh. The results of the numerical experiments conducted during the course of this study showed that the proposed method was both robust and accurate for the simulation of three-dimensional sloshing problems. Using a substantially coarse grid, historical results of the dynamic pressure at a selected position corresponded with existing experimental data. The pressure history with a finer grid was similar to that of a coarse grid; however, a fine grid provided higher peak pressures. The present method could be extended to the analysis of a sloshing problem in a complex geometrical configuration using unstructured meshes owing to the features of FEM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1937-1945
• /
• 1999

In paper, we propose a 3D polygonal mesh simplification technique based on vertex clustering. The proposed method differentiates the size of each cluster according to the local property of a 3D object. We determine the size of clusters by considering the normal vector of triangles and the vertex distribution. The subdivisions of cluster are represented by octree. In this paper, we use the Harsdorff distance between the original mesh and the simplified one as a meaningful error value. Because proposed method adaptively determine the size of cluster according to the local property of the mesh, it has smaller error as compared with the previous methods and represent the small regions on detail. Also it can generate a multiresolution model and selectively refine the local regions.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.129-136
• /
• 2008

All measures to cope with flooding rely on flood predictions to some extent. To investigate these predictions such as maximum water level or inundation area, a numerical model has been developed. The governing equations of the model are the two-dimensional Saint-Venant equations. The governing equations are discretized explicitly by using the leap-frog scheme and upwind scheme based on quadtree grids. The predicted numerical results have been verified by comparing to those of a Thacker problem. As a result of verifications, the present model is not only nearly four times as efficient as uniform grids but also in close agreement with the previous models. Next, the developed model is applied to several flood events in the Uiryeong basin. A general tendency is found that as a frequency is increasing, overall water levels including peak water level are increasing. At only a 500 year frequency, maximum water level is higher than 18.5 m. Therefore, it can be predictable that inundation will be generated in a 500 year frequency.

• Journal of Korea Water Resources Association
• /
• v.40 no.1 s.174
• /
• pp.25-38
• /
• 2007

A grid-based urban surface runoff model for simulating the temporal variation and spatial distribution of overland flow in a drainage area was developed. The process of routing of overland flow is modeled by the nonlinear storage equation which is composed of the continuity equation and the Manning's equation. For model operation, the drainage area is divided into grid areas, and spatially distributed topographical and hydrological information for model inputs is provided. Then overland flow is routed for each of the discretized cells of the area. In order to test the applicability of this model, temporal variations and spatial distributions of flow depth and overland flow was simulated in a fictitious and a real urbanized Kunja drainage area. Results indicate that the model can simulate reasonably well the urban runoff hydrograph.

• Geotechnical Engineering
• /
• v.13 no.4
• /
• pp.163-176
• /
• 1997

It has long been recognized that the H-beam steel rib has many shortcomings when used as a steel support in tunneling. One of the major shortcomings is the shotcrete shadow created behind H-beam flange which eventually reduces the load bearing capacity of shotcrete shell. In many European countries, plate girder as the H-beam steel rib has been replaced by lattice girder which has many advantages over the H-beam steel rib. Successful application of the lattice girder as a steel support requires a thorough investigation on the load bearing capacity of the lattice girder. Therefore, laboratory bending and compression tests were conducted on lattice girders with the aim of investigating the load bearing capacity of the lattice girders. The results of tests show that the load bearing capacity of laIn twice girders is higher than that of H-beams, which indicates that the lattice girder can be effectively used as a support in tunneling.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.2
• /
• pp.96-114
• /
• 2000

춘천 연옥은 색깔에 따라 세가지 유형 (연녹색, 암녹색, 및 회색 연옥)으로 구분되고 이들은 각기 서로 다른 조직과 조성을 나타낸다. 연녹색 연옥이 이중에서 가장 일반적인 유형이다. 연옥은 주로 극미립의 연옥질 투각섬석으로 구성되고 여기에 미량의 휘석, Mg-녹니석 및 방해석이 불순물로서 수반된다. 연옥질 투각섬석 결정들은 그 폭이 5$\mu\textrm{m}$ 이하의 극미립질 침상 결정형을 이루며 서로 치밀하게 얽혀있는 연옥 특유의 조직을 나타낸다. 주사전자현미경 하에서 (110)의 벽개면의 발달이 현저하고, 주사탐침현미경 하에서는 벽개면을 가로지르는 방향으로 특징적인 조선이 나타나는 것이 특징이다. 연옥질 투각섬석은 투과전자현미경 하에서 흔히 단쇄형과 복쇄형이 결합한 3중쇄형 격자가 복쇄형의 투각섬석 구조 내에서 불규칙적으로 협재되는 혼성격자 구조가 발달하는 것이 특징이다. 드물지만 5중쇄형 격자와 4중쇄형 격자도 관찰되는데, 이 같은 불규칙한 격자 혼재상은 회색 연옥에서 보다 현저한 경향을 보인다. 이와 같은 혼성격자 구조형의 존재는 춘천 연옥이 열역학적으로 비평형 상태에서 형성되었음을 시사하는 것으로 여겨진다. 리트벨트법에 의한 구조검증을 통해서 구해진 연옥질 투각섬석들의 격자상수 값들은 X-선회절의 경우, a=9.837(1)~9.9804(4)$\AA$, b=18.046(2)~18.062(1)$\AA$. c=5.2765(7)~5.2803(3)$\AA$, $\beta$=104.717(9)~104.786(3)$^{\circ}$로 계산되었다. 이에 비해서 중성자 회절법에 의해서 측정되 격자 상수 값은 a=9.8841(6)~9.8933(7)$\AA$, b=18.1429(7)~18.161(2)$\AA$, c=5.3024(3)~5.3060(7)$\AA$, $\beta$=104.698(7)~104.771(4)$^{\circ}$로서 X-선회절에 의한 값들과 약간의 차이를 보인다. 연옥질 투각섬석은 Ca에 대한 Mg의 치환에 의해 M(4) 자라의 크기가 작아지면서 b축의 단위포도 함께 줄어드는 결정화학적 특징을 나타낸다. 이는 중성자 회절분석에 의해서 구해진 M(4)의 자리점유율과 M(4)-O의 원자간 거리에 의해서도 확인된다. 그러나 연옥질 투각섬석에 대한 리트벨트법에 구조검증 결과는 연옥의 유형별 미시적 광물상과 혼성격자 구조형의 특징에 별다른 연계성이 없는 것으로 나타났다.