탄성파 탐사는 인공지진파를 이용하여 지표면 하부의 물성을 알아내는 지구물리탐사로서 20 세기 초부터 석유탐사와 공학적 지반조사에 가장 널리 사용되었다. 굴절법 탄성파 탐사는 지층의 탄성파 속도를 알아내는 방법으로서 최근에는 석조문화재 등의 지반특성 조사에서 사용된 예가 있다. 이번 연구에서는 공주 공산성의 쌍수정 광장에 위치하는 공산성 원형연못 주변의 지반에 대하여 굴절법 탐사를 실시하였다. 쌍수정 광장은 기존의 발굴조사를 통하여 백제 추정왕궁지가 위치한 곳으로 알려졌으며, 광장 남쪽에 원형연못(상면직경 7.3 m, 바닥직경 4.78 m, 높이 3 m)도 발굴되었다. 원형연못 주변에 5개 탄성파 측선을 설치하였고, 해머 타격점과 수신기의 배열을 3가지 다른 방식을 적용하여 24 m, 31 m, 48 m 측선깊이의 굴절법 자료를 얻었다. 대체로 공산성 원형연못 주변의 지반은 3개 층으로 구성되어 있다. 각 층의 겉보기 속도는 약 261${\~}$391 m/s, 약 591${\~}$992 m/s, 약 1950${\~}$3230 m/s이며, 첫 번째와 두 번째 층의 두께는 각각 약 2${\~}$2.4 m 와 4.6${\~}$8.6 m이다. 일반적으로 최하부 층의 속도는 기반암, 상부층들의 속도는 풍화토에 대응한다. 그러나 두 번째 층의 주시곡선 형태와 속도범위는 국내 석탑 문화재 하부의 것과 유사한 것으로 보아 공산성 연못주변은 인공적인 기초지반의 가능성을 제기하며, 그렇다면 공산성 원형연못은 파내려 간 것보다는 쌓아 올렸을 것이다.
Proceedings of the Korean Society of Applied Pharmacology
/
1996.04a
/
pp.271-271
/
1996
PG의 농도가 AM의 경피투과에 미치는 영향은 용해도곡선과 유수분배곡선의 교점인 40% 농도에서 투과극대를 보였다. 지방산 및 지방산 알코올의 촉진효과는 리놀레인산>올에인산>올레일알코올> DHA=EPA=라우린산의 순이었고 PG에 리놀레인산 또는 올레인산을 첨가한 경우는 PG 단독에 비해 129.9 및 43.0배의 투과를 나타냈다. 또, 리놀레인산의 농도증가 (2,5,10%)에 따라 피부/매질 간의 분배계수가 가장 큰 5% 농도의 리놀레인산을 사용했을 때 투과효과가 최대로 나타났다. 한편, AM의 농도증가에 따른 투과효과에 있어서는 포화용해상태인 2% 약물농도에서 투과 flux가 가장 컸다. 라우릴황산타트륨의 첨가는 유의성 있는 효과를 발현하지 못했고 지방산과 병용시에도 지방산 단독 사용시에 비해 오히려 투과를 감소시켰다. 종차에 따른 AM의 피부투과에 있어서는 리놀레인산을 투과촉진제로 사용한 결과 흰주와 무모마우스의 투과 flux가 각각 23.78 및 213.29 $\mu\textrm{g}$/$\textrm{cm}^2$/hr로 무모마우스가 8.97배 높았다. 흰주의 추출액 및 호모지네이트 중에서의 AM의 대사에 있어서는 겉보기 1차 분해속도정수가 표피측추출액, 장막측추출액, 호모지네이트에서 각각 0.0105, 0.572 및 6.153$hr^{-1}$로 호모지네이트 중의 분해속도가 가장 빨라 AM은 피부투과 중에 가장 많이 분해됨을 알았다.
변산반도 서부 해안지역의 소규모 유역에 대하여 대수층을 통한 해수침투의 범위를 공간적으로 규명하기 위하여, 시추자료를 포함한 전기비저항 탐사와 지하수의 수질분석을 실시하였다. 전기비저항 탐사는 다층 구조로 되어있는 대수층 내 지하수의 수질변화 특성을 효과적으로 탐지해 낼 수 있는 수직탐사법을 이용하였으며, 탐사결과 겉보기비저항 곡선은 H type에 해당함을 알았다. 시추에 의해 3층 구조로 밝혀진 연구지역에 대하여 총 30 지점에 대한 H type 수직탐사 자료의 1차원 역산결과, 중간층과 상/하부층의 비저항 크기 차이가 크게 나타남에 따라 이 연구에서는 고전도도 지역, 중간지역, 저전도도지역 등 3가지의 영역으로 구분하였다. 15개 지점의 천부 지하수 관정에서 채취된 지하수 시료 분석결과를 TDS에 대한 HCO3/Cl과 Ca/Na 몰비로 도시하였는데, 그래프의 기울기에 따라 크게 2가지 그룹으로 구분되었다. 수직탐사의 3가지 영역과 지하수 수질 분석에 의한 2가지 그룹을 비교한 결과 낮은 농도의 HCO3/Cl과 Ca/Na를 나타내는 관정은 고전도도 지역에 위치하며, 높은 농도의 HCO3/Cl과 Ca/Na를 나타내는 관정은 저전도도 지역에 위치하는 것으로 나타났다. 따라서 이 연구에서 제시한 바와 같이 전기비저항 수직탐사 결과와 지하수 수질분석 결과를 복합 해석하는 경우 시추자료가 제한적인 해안지역 대수층을 통한 해수침투 범위를 효과적으로 규명할 수 있는 것으로 밝혀졌다.
Journal of the Korea Institute of Information and Communication Engineering
/
v.5
no.7
/
pp.1354-1360
/
2001
Calculated velocity distribution was used to visual information by image that is obtained from camera. The visual velocity of object that is obtained from this visual information were fused and experimented. That is, need motion of eye that motion of head that happen by external disturbance or move of camera itself to get stable image in environment that receive external disturbance can be compensated. In this treatise, algorithm that control gaze which vision and sense of equilibrium are fused in environment with external disturbance proposed, and thing that compare with that it controls gaze only that control gaze which vision and sense of equilibrium are fused in the experiment result and position deflection is few confirmed. This was because action of camera prop is effect that record conclusion error of the speed because the appearance speed is decreased being compensated by angular velocity sensor.
TMCP steel manufactured by controlled rolling followed by accelerated cooling process is known to have extra-ordinary mechanical properties such as tensile strength and toughness. However, there is much uncertainty about the fatigue fracture characteristics, especially, in the welded state of this steel. In case of this steel, the softening zone by welding is generated in heat affected zone in contrast with the case of conventional normalized high strength steel. This softening zone is considered to play significant roles in low cycle fatigue fracture of the welded part of this steel. In this paper, the low cycle fatigue behaviors of TMCP steel were inspected in as-received and welded state using the smooth specimen. The fatigue life-time was seperately investigated on the basis of failure of the specimen and crack initiation which is detected by differential strain method. Moreover, the low cycle fatigue characteristics of TMCP steel were quantitatively compared with those of the conventional normalized steel of same strength level.
Recently, the electrical DC survey has frequently been performed to assess the safety of embankment. This study showed that the damaged section of embankment could be appropriately detected by the survey only when the three dimensional effect was correctly considered. The shape of the three dimensional embankment was numerically implemented, and a proper modeling was performed to confirm the effect by analyzing the apparent and inverted true resistivity. Then, the field work was carried out. The three dimensional interpretation distinguished the erroneous weak zones from the geometrical artifact, and the embankment was ensured as safe both by the additional survey performed in rainy season and the partial excavation for direct observation.
Titanium dioxide bodies sintered at 130$0^{\circ}C$ for 10 h under the oxygen flowing were reduced with hydrogen in 1200, 1250 and 130$0^{\circ}C$ for 4~20 h. Reduction kinetics were evaluated by measuring a weight loss between before and after reduction, and the thickness of reduced layer, respectively. The reduction followed the parabolic rate law, indicating that the rate-determining process is diffusion. From the Arrhenius plots, the apparent activation energies for the reduction were obtained as 210$\pm$10 kJ/mol.
Transactions of the Korean Society of Mechanical Engineers
/
v.8
no.6
/
pp.591-598
/
1984
The results of measurements showing normal vibrations and rubbing noise generated during unlubricated smooth sliding between metal surfaces are presented. The measurements were made on pin-on-disc type apparatus instrumented with piezoelectric acceleration transducers and microphones. Spectral analysis of the both signals up to frequency of 10kHz indicates that they are closely correlated. The major components of both signals in this frequency range are primarily associated with the normal contact vibrations which are excited by surface irregularities being swept through the contact region during sliding. As an approximation to the seismic input of surface irregularities, an effective surface wavenumber spectrum was assumed in the form of an inverse vibration and noise measurements for a number of surface finishes and mean loads. The predominant frequency component of which levels of the normal vibration and noise are close to overall levels of the both signals is induced by contact resonance between the two bodies and its frequency can be calculated from the Hertzian theory.
Park Kihyun;Jung Jaewoo;Lee Hyunseop;Seo Heondeok;Jeong Seokhun;Lee Sangjik;Jeong Haedo
Journal of the Korean Society for Precision Engineering
/
v.22
no.8
s.173
/
pp.27-33
/
2005
Polishing pads play an important role in chemical mechanical polishing(CMP) which has recently been recognized at the most effective method to achieve global planarization. In this paper, we have investigated CMP characteristics as a change of groove density of polishing pads. The parameter $(K_n)$ is proposed to estimate groove density of pad. The $K_n$ is defined as groove area divided by pitch area. As the groove density value increased, removal rate increased to some point and then gradually saturated in case of increasing the groove density excessively. In addition Within wafer non-uniformity(WIWNU) worse as groove density increased excessively, although WIWNU improved as groove density increased. Also the uniformity of temperature of pad surface decreased as the groove density increased. It was because that the cooling effect increased as groove density increased. In other words, increasing the groove density which means the apparent contact area of pad has influence on amount of discharge of slurry during polishing process.
Transactions of the Korean Society of Mechanical Engineers B
/
v.30
no.1
s.244
/
pp.67-73
/
2006
This investigation deals with the spin-up flows in a circular container of aspect ratio, 2.0. Shear front is generated in the transient spin-up process and propagating from the side wall to the central axis in a rotating container. Propagation of the shear front to the axis in a rotating container means the region acquires an angular momentum transfer from the solid walls. Propagating speed of the shear front depends on the apparent viscosity of polymer solution. Two kinds of polymer solutions are considered as a working fluid: one is CMC and the other is CTAB solution. CMC solution has larger apparent viscosity than that of water, and CTAB shows varying apparent viscosities depending on the applied shear rates. Transient and spatial variations of the apparent viscosities of the present polymer solutions (CTAB and CMC) cause different speeds of the propagating shear front. In practice, CMC solution that has larger values of apparent viscosity than that of water always shows rapid approach to the steady state in comparison of the behavior of the flows with water. However, for the CTAB solution, the speed of the propagating of the shear front changes with the local magnitude of its apparent viscosity. Consequently, the prediction of Wedemeyer's model quantitatively agrees with the present experimental results.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.