• Korean Journal of Materials Research
• /
• v.5 no.4
• /
• pp.426-432
• /
• 1995

윤활제인 zinc stearate의 첨가량 (0~4wt%)을 변화시켜 U$O_{2}$분말의 겉보기밀도, 성형시의 분말입자간 마찰과 입자/다이벽 마찰간의 상관관계를 조사하였다. 소량의 윤활제 첨가시에는 U$O_{2}$분말입자간 박막의 윤활제 도포층이 형성되어 겉보기밀도가 증가한 반면 다량의 윤활제를 첨가한 경우에는 U$O_{2}$ 분말입자에 두꺼운 윤활제 도포층이 형성되고 미혼합된 윤활제가 존재하여 겉보기밀도는 감소하는 경향을 보였다. 윤활제를 첨가혼합한 상태에서 다이벽 윤활도포 유무에 따라 구한 U$O_{2}$ 성형체의 성형압력/성형밀도 자료로부터 분말입자간 마찰, 입자/다이벽 마찰 그리고 성형시 lubrication/inhibition등의 상대적 중요성을 조사하였다. 입자/다이벽 마찰에 의한 압력손실은 입자간 마찰에 의한 압력손실보다 크게 나타났다. 입자/다이벽 마찰에 의한 압력손실은 다이벽 윤활제 도포에 의해 최소화될 수 있지만 상대적으로 바람직하지 않은 성형시의 inhibition이 야기되는 것으로 나타났다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.827-834
• /
• 2022

Recently, marine surveys using unmanned ships are attracting attention, and research on small unmanned ships using sails is on the rise. Sail drones can be used for marine surveys, monitoring, and pollution management. Therefore, in this study, using the method of estimating the ship speed for twin sail drones, the optimal conditions for sailing are checked, and the performance to be considered in the initial design stage, such as the motion performance and resistance of the sail drone. Consequently, the twin sail drone had a speed lower than 2.0 m/s, and the stability satisfied the rule by DNV. In addition, the maximum speed at an angle of attack of 20° at TWA 100° was 1.69 m/s and that at an angle of attack of 25° at TWA 100° was 1.74 m/s.

• The Journal of Engineering Geology
• /
• v.7 no.2
• /
• pp.139-149
• /
• 1997

Electrical resistivity monitoring methods were adopted to detect groundwater table change in alluvium. Numerical modelling test using finite element method(FEM) and field resisfivity monitoring were conducted in the study. The field monitoring data were acquired in the alluvium deposit site in Jeong-Dong Ri, Geum River where pumping test had been conducted continuously for 20 days to make artificial changes of groundwater table. The unit distance of the electrode array was 4m and 21 fixed electrodes were applied in numerical calculation and field data acquisition. "Modified Wenner" and dipole-dipole array configurations were used in the study. The models used in two-dimensional numerical test were designed on the basis of the simplifving geological model of the alluvium in Jeong Dong Ri, Geum River. Numerical test results show that the apparent resistivity pseudosections were changed in the vicinity of the pootion where groundwater table was changed. Furthermore, there are some apparent resistivity changes in the boundary between aquifer and crystalline basement rock which overlays the aquifer. The field monitoring data also give similar results which were observed in numerical tests. From the numerical test using FEM and field resistivity monitoring observations in alluvium site of Geum River, the electrical monitoring method is proved to be a useful tool for detecting groundwater behavior including groundwater table change. There are some limitations, however, in the application of the resistivity method only because the change of groundwater table does not give enough variations in the apparent resistivity pseudosections to estimate the amount of groundwater table change. For the improved detection of groundwater table changes, it is desirable to combine the resistivity method with other geophysical methods that reveal the underground image such as high-resolution seismic and/or ground penetrating radar surveys.

• Tunnel and Underground Space
• /
• v.20 no.6
• /
• pp.455-464
• /
• 2010

The variations of the uniaxial compressive strength, the strains and the elastic constants with respect to the angle of anisotropy are analyzed in order to investigate the characteristics of a transversely isotropic rock experimentally. Total 35 specimens of 7 different angles from a large block of rhyolite presenting the flow structure obviously are used in tests. This study is composed of two reports; the elastic constants are mainly analyzed for the every individual angle in the report No. 1 and they will be discussed synthetically in the report No. 2. From the specimens of 0 and 90 degree, 4 independent elastic constants which can directly be obtained without the help of any other suggested equations, may be referred to the true values. Data variation in the strain measurements differs on the angle is analyzed. That of small angle specimens tends higher than that of large angle specimens. The relation of apparent Young’s modulus and angle is found to be M- or U-shaped. For small angle specimens, Saint-Venant approximation cannot be applied successfully on account of showing the non-monotonous increase, and E1 is analyzed out of the true value range. In the specimen of $\phi$ = 75, the deviation of strain measurement and strength are smallest and 4 all constants are analyzed in the true value range. Therefore, specimen of the angle of around 75 may become preferable if only one specimen should be used in test of a transversely isotropic rock.

• 한국해양학회지
• /
• v.30 no.5
• /
• pp.467-479
• /
• 1995

To investigate the current structures and diffusion characteristics in Youngil Bay, a systematic field observations of current velocity, drogue tracking, dye diffusion experiment and aerial photographing were performed. The flow patterns in the surface layer of the bay depend more strongly on the wind and ocean current than the tidal current, and the patterns in the middle are predominated by the ocean current. The residual currents in the surface generally flow toward the inner bay through the western and central areas of the bay, and then the currents go toward the ocean along the eastern shore of the bay with anti-clock-wise circulation. The residual currents in the surface of the eastern cease are not nearly influenced by the wind, and the currents always move northward to northeastward. However, the currents in the western shore depend strongly on the wind and the outflow of the Huntsman River, that is, the residual currents go northward to northeastward when the southerly to westerly winds blow or a large amount of flow from the river discharge. The residual currents in the middle layer flow toward the inner bay along the western shore of the bay, and the incomed currents go out to the ocean along the eastern shore with anticlockwise circulation. The diffusion of dye patch by the instantaneous point source shows a similar pattern to the drogue trajectory, and the apparent diffusion coefficients of the dye patch by Fick's theory is 1.14${\times}$10$^4$ cm$^2$/s. The behavior of the river discharges in flood shows a band type's effluent pattern toward the outer bay along the western coast.

• Food Engineering Progress
• /
• v.23 no.4
• /
• pp.283-289
• /
• 2019

This study was performed to determine the effect of psyllium husk addition on the physical properties of rice extrudates. Rice-based formulations mixed with psyllium husk (0, 7, 14 and 21%) were extruded at a die temperature of 140℃, screw speed of 200 rpm, and moisture content of 20%. As the content of psyllium husk increased, expansion ratio decreased, while piece density and specific length increased. Apparent elastic modulus, breaking strength, adhesiveness, and hardness augmented with an elevation in psyllium husk content. Lightness declined as psyllium husk content furthered, while redness, yellowness, and color difference intensified. Water soluble index and water absorption index increased with an increased amount of psyllium husk. In conclusion, the addition of psyllium affected the expansion of extruded rice snack possessing hard texture, small cells, and sticky texture due to higher water absorption during hydration.

• Economic and Environmental Geology
• /
• v.27 no.2
• /
• pp.191-199
• /
• 1994

We have developed an algorithm based on the method of integral equations to simulate the magnetotelluric (MT) responses of three-dimensional (3-D) bodies in a layered half-space. The inhomogeneities are divided into a number of cells and are replaced by an equivalent current distribution which is approximated by pulse basis functions. A matrix equation is constructed using the electric Green's tensor function appropriate to a layered earth, and is solved for the vector current in each cell. Subsequently, scattered fields are found by integrating electric and magnetic Green's tensor functions over the scattering current About a 3-D conductive body near the earth's surface, interpretation using 2-D transverse electric modeling schemes can imply highly erratic low resistivities at depth. This is why these routines do not account for the effect of boundary charges. However, centrally located profiles across elongate 3-D prisms may be modeled accurately with a 2-D transverse magnetic algorithm, which implicitly includes boundary charges in its formulation. Multifrequency calculations show that apparent resistivity and impedance phase are really two complementary parameters. Hence, they should be treated simultaneously in broadband MT interpretation.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.133-143
• /
• 1998

The viewers primarily watch a television under the surround light source of an incandescent or a fluorescent light. When human visual system has been adapted chromtically under the different surround light, the same chromaticities elicit quite different color appearnaces. Therefore, the corresponding color reproduction is the most suitable objective of a color television system. In this paper, an efficient corresponding color reproduction method based on the chromatic adaptation of human visual system is proposed in which colors in the display have the same appearance as the colors in the original would have had if they had been illuminated by standard illuminant ($D_{65}$). The chromaticities that appeared neutral in human visual system were determined by the Hunt's experimental results of the color adaptation in picture viewing situations and the corresponding chromaticity coordinates of stimuli in chromatic adaptation were obtained by the Bartleson's theory. Also, the corresponding color reproduction is realized by changing the phase and the gain of the demodulation axes in television receiver. Experimental results show that the proposed corresponding color displayed on the television is better than that of the conventional colorimetric color reproduction under the surround light sources.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.774-778
• /
• 1999

Tee yields, physical properties and gel formation abilities or hot-water extractable material (HWEM) and water-soluble alginate (WSA) extracted from Laminaria japonica were estimated and compared with those of the alginate (ASA) extracted with alkali solution in the routine procedure. The contents of HWEM, WSA and ASA in Laminaria japonica were 8.3, 2.5 and $19.1\%$, respectively. The HWEM and WSA had no gel formation ability, whereas the ASA had a good gol formation ability. The HWEM and WSA were almost not viscous even in $1.5\%$ of the sample solution, whereas the ASA was very highly viscous in above $0.5\%$ of sample solution. The melting points of $1\%$ solution of HWEM, WSA and ASA sample were 31, 24 and $14^{\circ}C$, respectively. The solubility at melting point of each samples varied from 2.3 to 2.6 g/100 g water, and a few differences were observed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.931-941
• /
• 2020

There is a growing interest this paper for ocean sensing where autonomous vehicles can play an essential role in assisting engineers, researchers, and scientists with environmental monitoring and collecting oceanographic data. This study was conducted to develop a rigid sail for the autonomous sailing drone. Our study aims to numerically analyze the aerodynamic characteristics of curvy twin sail and compare it with wing sail. Because racing regulations limit the sail shape, only the two-dimensional geometry (2D) was open for an optimization. Therefore, the first objective was to identify the aerodynamic performance of such curvy twin sails. The secondary objective was to estimate the effect of the sail's spacing and shapes. A viscous Navier-Stokes flow solver was used for the numerical aerodynamic analysis. The 2D aerodynamic investigation is a preliminary evaluation. The results indicated that the curvy twin sail designs have improved lift, drag, and driving force coefficient compared to the wing sails. The spacing between the port and starboard sails of curvy twin sail was an important parameter. The spacing is 0.035 L, 0.07 L, and 0.14 L shows the lift coefficient reduction because of dramatically stall effect, while flow separation is improved with spacing is 0.21 L, 0.28 L, and 0.35 L. Significantly, the spacing 0.28 L shows the maximum high pressure at the lower area and the small low pressure area at leading edges. Therefore, the highest lift was generated.