• Title/Summary/Keyword: 검사 시편

Search Result 242, Processing Time 0.021 seconds

In vitro biocompatibility study of zirconia/alumina composites (지르코니아/알루미나 복합 세라믹의 시험관내 생체적합성에 관한 연구)

  • Kim, Kyu-Jin;Kim, Hyun-Man;Ko, Jea Seung;Kim, Dae-Joon;Han, Jung-Suk
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.18 no.2
    • /
    • pp.73-80
    • /
    • 2002
  • 치과용 임플란트의 세라믹 지대주를 위해 개발된 지르코니아 함유 세라믹 시편의 생체 적합성을 평가하기 위하여 시험관내 세포 독성을 검사를 시행하였다. L929 섬유모세포를 $37^{\circ}C$, 90% 습도, 5% CO2 및 95% 공기의 조건을 유지하는 세포 배양기에서 배양하여 실험에 사용하였다. 배양 2일, 4일, 6일 마다 시편을 넣은 배양 접시 내의 전체 세포 수와 생존 세포 수를 세어 세포 증식과 세포 생존율 검사를 시행하였다. millipore filter test를 이용하여 succinate dehydrogenase 효소 활성을 검사하였으며, 세포막 투과성의 변화를 관찰하기 위해 agar overlay test를 시행하였다. 음성 대조군은 시편을 사용하지 않았으며, 양성 대조군은 시편과 같은 크기의 구리를 사용하여, 다음과 같은 결과를 얻었다. 1. 세포 증식과 세포 생존율 검사에서는 지르코니아 함유 세라믹을 넣은 실험군과 음성 대조군 모두에서 시간이 경과함에 따라 세포가 증식하는 양상을 보였다. 세포 생존율 검사에서도 실험군과 음성 대조군이 유사한 결과를 나타내었다. 2. millipore filter test에서는 실험 시편 모두에서 염색 정도의 변화가 없이 음성 대조군과 동일한 결과를 나타냈다. 반면에 구리 시편을 넣은 양성 대조군에서는 중등도의 세포 독성을 나타냈다. 3. agar overlay test에서도 시편을 넣지 않은 음성 대조군에서는 세포 성장에 변화가 나타나지 않았으며, 실험군에서도 시편 주위로 탈색이 관찰되지 않아서 음성대조군과 같은 결과를 나타냈다. 양성 대조군에서는 심한 세포 독성을 나타내었다. 4. 실험결과, 치과용 임플란트의 세라믹 지대주를 위해 개발된 지르코니아 함유 세라믹 시편은 시험관내 세포 독성을 나타내지 않았다.

Determination of an Test Condition for IR Thermography to Inspect a Wall-Thinning Defect in Nuclear Piping Components (원전 배관 감육 결함 검사를 위한 IR 열화상시험 조건 결정)

  • Kim, Jin-Weon;Yun, Won-Kyung;Jung, Hyun-Chul;Kim, Kyeong-Suk
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.32 no.1
    • /
    • pp.12-19
    • /
    • 2012
  • This study conducted infrared (IR) thermography tests using pipe and plate specimens with artificial wall-thinning defects to find an optimal condition for IR thermography test on the wall-thinned nuclear piping components. In the experiment halogen lamp was used to heat the specimens. The distance between the specimen and the lamp and the intensity of halogen lamp were regarded as experimental parameter. When the distance was set to 1~2 m and the lamp intensity was above 60 % of full power, a single scanning of IR thermography detected all artificial wall-thinning defects, whose minimum dimension was $2{\Theta}=90^{\circ}$, d/t=0.5, and $L/D_o=0.25$, within the pipe of 500 mm in length. Regardless of the distance between the specimen and the lamp, the image of wall-thinning defect in IR thermography became distinctive as the intensity of halogen lamp increased. The detectability of IR thermography was similar for both plate and pipe specimens, but the optimal test condition for IR thermography depended on the type of specimen.

A Study on Using Finite Difference-Time Domain Modeling of Electromagnetic Wave Propagation for Thickness Determination and Rebar Detection in Concrete Specimens (유한차분 시간영역법을 이용한 콘크리트의 두께측정과 철근위치 탐사를 위한 전자기파 전파 모델링)

  • 임홍철;조윤범
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.12 no.4
    • /
    • pp.639-648
    • /
    • 1999
  • 레이더법은 건축구조물에 대한 비파괴 검사의 대표적인 방법의 하나이다. 레이더법을 이용하는데 영향을 주는 요인들을 연구하고, 레이더로 측정된 결과들을 분석하기 위해서는 전자기파의 전파에 대한 수치적인 모델링을 통한 이론적인 접근이 필요하다. 콘크리트 시편에 전파되는 전자기파를 모델링 하기 위해 유한차분 시간영역법을 적용하고자 한다. 유한차분 시간영역법은 전자파 해석과 모델링을 통한 시뮬레이션에 매우 유용한 방법이다. 본 연구에서는 유한차분 시간영역법을 이용하여 두께가 다른 4개의 시편과 두께는 100㎜로 동일하고 피복두께가 다른 3개의 시편을 3차원으로 모델링 하였다. 두께 측정 모델링 결과에서는 계산영역의 셀간격과 입사파의 파장/콘크리트 시편의 두께값이 모델링의 정확성에 미치는 영향을 알 수 있었다. 철근이 있는 시편의 모델링에서는 0.08%∼0.5%의 오차로 철근의 위치를 확인할 수 있었다.

  • PDF

Measurment of Horizontal rebar Spacing in Concrete Specimens Using Radar (레이더를 이용한 콘크리트 시편 내 수평 배근 간격 탐사)

  • 임홍철;김우석
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.4 no.2
    • /
    • pp.65-72
    • /
    • 2000
  • 콘크리트 구조물이 지진 등으로 손상을 입었을 때 그 내부 상태를 파악하는 일은 구조물의 안전성 판단에 필요한 중요 과정중 하나이다 손상도 파악에 사용되는 비파괴 검사 방법 중 레이더법은 현재 콘크리트 부재의 두께와 매립된 철근 및 공동 탐사에 적용되고 있다 레이더법은 다른 비파괴 검사 방법에서와 마찬가지로 측정된 신호의 처리와 해석에 따라 그 결과가 좌우된다 . 이논문에서는 상용 레이더 시스템에서 얻어지는 화상 데이트터를 개선하는 방법을 개발하여 철근이 매립된 콘크리트 시편에 적용하였다 실험에 사용된 기편의 크기는 1,000mm(길이)$\times$600mm (폭) $\times$140mm(두께) 이고 철근의 매립깊이는 표면으로부터 철근 중심까지 60mm 이다 레이더 실측 실험에서 철근의 수평배근 간격을 60 90, 120, 150 mm 로 변화시켜 간격탐사가능성을 시험하였다 결과적으로 상용 시스템에 비해 샹상된 판별효과를 나타냈으며 배근 간격이 90, 120, 150mm 인 시편에서 그 간격을 정확히 찾아내었다.

  • PDF

Application of Modeling of Electromagnetic Wave Propagation for Thickness Determination Using Finite Difference-Time Domain (유한차분 시간영역법을 이용한 콘크리트 두께측정 전자파 모델링의 적용)

  • 임홍철;남국광
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.15 no.2
    • /
    • pp.341-349
    • /
    • 2002
  • The radar method is becoming one of the major nondestructive testing(NDT) techniques lot concrete structures. Numerical modeling of electromagnetic wane is needed to analyze radar measurement results. Finite difference-time domain(FD-TD) method can be used to simulate electromagnetic wave propagation through concrete specimens. Five concrete specimens with different thickness are modeled in 3-dimension. Radar modeling results compare measurement results to find backface of the concrete specimens and measure thickness of the concrete specimens.

Thermographic Inspection of Fatigue Crack by Using Contact Thermal Resistance (접촉 열저항 효과를 이용한 피로균열의 적외선검사)

  • Yang, Seungyong;Kim, Nohyu
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.33 no.2
    • /
    • pp.187-192
    • /
    • 2013
  • Fatigue crack was detected from a temperature change around surface crack using the thermographic technique. Thermal gradient across the crack decreased very much due to thermal resistance of contact surface in the crack. Heat diffusion flow passing through the discontinuity was visualized in temperature by infrared camera to find and locate the crack. A fatigue crack specimen(SM-45C), which was prepared according to KS specification and notched in its center to initiate fatigue crack from the notch tip, was heated by halogen lamp at the end of one side to generate a heat diffusion flow in lateral direction. A abrupt jump in temperature across the fatigue crack was observed in thermographic image, by which the crack could be located and sized from temperature distribution.

Acoustic Emission Application for Aerospace Composite Materials (항공용 복합재료에 대한 음향방출의 활용)

  • Lee, Sang-Ho
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.21 no.3
    • /
    • pp.313-318
    • /
    • 2001
  • To establish nondestructive test method for aerospace composite materials, various composite specimens were tested and analyzed using acoutic emission. The hit rate of acoustic emission closely was rotated with crack initiation and propagation. This report also presents defection capability of crack initiation pressure, initial crack active location, and crack propagation using acoustic emission.

  • PDF

Radar Imaging of Concrete Specimens with Improved Resolution Using Expanded Frequency Bandwidth (주파수 대역 확장을 이용한 콘크리트 시편의 레이더 영상 분해능 향상)

  • 임홍철;이주희
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.6 no.1
    • /
    • pp.13-21
    • /
    • 2002
  • Frequency bandwidth has been combined to determine adequate frequency bandwidth which is necessary for nondestructive testing when using inverse synthetic aperture radar(ISAR). For imaging inside of concrete specimens using radar, the principles of radar and signal processing are discussed. Experimental data obtained from radar measurement of three different concrete specimens at two different frequency bandwidths of 2∼3.4 GHz, 3.4∼5.8 GHz and these two frequencies are combined to obtain improved imagery. A signal processing scheme has been implemented to visualize inside concrete specimens. The influence of frequency bandwidth was analyzed in nondestructive testing by changing frequency bandwidth for concrete specimen.

Ellipsometry 에서의 calibration 및 입사면 고정형 ellipsometer

  • 경재선;방경윤;최은호;손영수;안일신;오혜근
    • Proceedings of the Korean Society Of Semiconductor Equipment Technology
    • /
    • 2003.12a
    • /
    • pp.18-22
    • /
    • 2003
  • 일반사용자들은 ellipsometer를 사용이 어려운 장비로 인식하고 있다. 본 연구는 초보자들이 손쉽게 사용할 수 있는 ellipsometer를 제작하는데 목적이 있다. 시편을 측정하기 전에 반드시 해야 할 과정인 alignment와 calibration을 하지 않고 측정할 수 있도록 제작하였다. 기본 구조는 rotating compensator spectroscopic ellipsometry를 이용하였으며 , 입사각을 70도로 고정시키고 기존의 sample holder 구조를 바꾸어 어떠한 시편을 놓아도 입사면이 변하지 알게 하여 calibration 이 요구되지 않는 ellipsometer를 개발하였다. 장비의 성능과 정밀도를 검사하기 위하여 여러 가지 표준시료를 측정하여 일반 RCSE와 측정결과를 비교하였다. 또한 고정된 입사면의 calibration값의 신뢰도를 검사하기 위하여 반복적으로 측정할 때마다 시편을 재배치하여 실험하였다.

  • PDF

Internal Defect Position Analysis of a Multi-Layer Chip Using Lock-in Infrared Microscopy (위상잠금 적외선 현미경 관찰법을 이용한 다층구조 칩의 내부결함 위치 분석)

  • Kim, Seon-Jin;Lee, Kye-Sung;Hur, Hwan;Lee, Haksun;Bae, Hyun-Cheol;Choi, Kwang-Seong;Kim, Ghiseok;Kim, Geon-Hee
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.35 no.3
    • /
    • pp.200-205
    • /
    • 2015
  • An ultra-precise infrared microscope consisting of a high-resolution infrared objective lens and infrared sensors is utilized successfully to obtain location information on the plane and depth of local heat sources causing defects in a semiconductor device. In this study, multi-layer semiconductor chips are analyzed for the positional information of heat sources by using a lock-in infrared microscope. Optimal conditions such as focal position, integration time, current and lock-in frequency for measuring the accurate depth of the heat sources are studied by lock-in thermography. The location indicated by the results of the depth estimate, according to the change in distance between the infrared objective lens and the specimen is analyzed under these optimal conditions.