• Annual Conference of KIPS
• /
• 2015.04a
• /
• pp.546-548
• /
• 2015

최근에는 자동차 전장용 소프트웨어 결함으로 인한 피해로 자동차 리콜 사태가 일어나는 것을 종종 볼 수 있다. 소프트웨어 검사와 TMMi 프로세스를 전장용 소프트웨어에 이용한다면 소프트웨어 결함을 줄이며 사고 발생률 역시 감소될 수 있다. 전장용 소프트웨어에 이를 적용해 볼 때, 검사 방법에 적합한 방향으로 검사 프로세스를 개선할 수 있으며, 고품질 소프트웨어 또한 구현할 수 있다.

• Monthly Duck's Village
• /
• s.202
• /
• pp.18-23
• /
• 2020

퇴비부속도 검사 의무제도가 지난 3월 25일부터 시행에 들어갔다. 그러나 현장의 준비 부족 등을 이유로 정부는 1년간의 계도기간을 부여하고 계도기간 동안 행정처분을 유예하고 적극적인 농가 이행지원을 추진하기로 결정했다. 가축분뇨 배출시설 허가를 받은 농가는 6개월, 신고한 농가는 1년마다 축사내 퇴비 부속도 검사를 실시하고 그 결과를 3년간 보관해야 한다. 오리를 비롯한 축산농가들은 어떤 사항을 어떻게 준비하고 무엇을 준수해야 할까? 이주명 농림축산식품부 축산국장을 직접만나 축산농가들이 알아야 할 퇴비 부속도 검사 의무화의 모든 것을 자세히 알아봤다.

• Journal of radiological science and technology
• /
• v.32 no.4
• /
• pp.361-370
• /
• 2009

The image quality management of bone mineral density is the responsibility and duty of radiologists who carry out examinations. However, inaccurate conclusions due to lack of understanding and ignorance regarding the methodology of image quality management can be a fatal error to the patient. Therefore, objective of this paper is to understand proper image quality management and enumerate methods for examiners and patients, thereby ensuring the reliability of bone mineral density exams. The accuracy and precision of bone mineral density measurements must be at the highest level so that actual biological changes can be detected with even slight changes in bone mineral density. Accuracy and precision should be continuously preserved for image quality of machines. Those factors will contribute to ensure the reliability in bone mineral density exams. Proper equipment management or control methods are set with correcting equipment each morning and after image quality management, a phantom, recommended from the manufacturer, is used for ten to twenty-five measurements in search of a mean value with a permissible range of ${\pm}1.5%$ set as standard. There needs to be daily measurement inspections on the phantom or at least inspections three times a week in order to confirm the existence or nonexistence of changes in values in actual bone mineral density. in addition, bone mineral density measurements were evaluated and recorded following the rules of Shewhart control chart. This type of management has to be conducted for the installation and movement of equipment. For the management methods of inspectors, evaluation of the measurement precision was conducted by testing the reproducibility of the exact same figures without any real biological changes occurring during reinspection. Bone mineral density inspection was applied as the measurement method for patients either taking two measurements thirty times or three measurements fifteen times. An important point when taking measurements was after a measurement whether it was the second or third examination, it was required to descend from the table and then reascend. With a 95% confidence level, the precision error produced from the measurement bone mineral figures came to 2.77 times the minimum of the biological bone mineral density change. The value produced can be stated as the least significant change (LSC) and in the case the value is greater, it can be stated as a section of genuine biological change. From the initial inspection to equipment moving and shifter, management must be carried out and continued in order to achieve the effects. The enforcement of proper quality control of radiologists performing bone mineral density inspections which brings about the durability extensions of equipment and accurate results of calculations will help the assurance of reliable inspections.

• Defense and Technology
• /
• no.10 s.164
• /
• pp.38-42
• /
• 1992

복합재 압력용기의 제작 및 사용중에 발생하는 결함(손상)의 비파괴검사를 통해 구조물의 건전성을 평가하는 것은 제품의 품질보증 관점에서 아주 중요합니다. 복합재에서는 여러 종류의 결함이 동시에 존재할수 있으며, 결함-기계적 성질-비파괴특성 사이의 상호관계는 완전히 알려져 있지 않습니다. 이글에서는 복합재 연소관에 존재하는 결함의 위험도와 결함 탐지를 위한 비파괴 검사 기법에 대해 먼저 살펴보았습니다. Filament Winding으로 제조한 복합재 연소관의 Proof Testing과 관련해 음향방출(AE)법에 의한 최근의 연구결과를 살펴본 다음, 연소관의 신뢰도 확보를 위한 비파괴 평가 방법에 대해 앞으로의 연구 방향을 제시하였습니다

• The Journal of the Acoustical Society of Korea
• /
• v.5 no.1
• /
• pp.35-40
• /
• 1986

본 연구는 펄스 반사법을 이용하여 금속 재료 단면의 영상을 얻는데 그 목적이 있다. 기존의 탐 상기는 대부분 A - 스캔 방식으로 결과를 전시하여 검사자가 직접 CRT 상에 나타난 결과를 판독해야 하므로 숙련자라 하더라도 어느정도 오차가 수반되며 판독에 시간이 요하는 등 불편이 따른다. 본 연구 에서는 판독 과정을 자동화함으로써 정확도와 검사 속도를 개선하였으며 탐촉 지점은 스텝핑모터를 이 용하여 일정 간격으로 제어하였다. 도 탐상 결과를 B-스캔 방식으로 영상 처리함으로써 재료 단면의 상 태 파악을 용이하게 하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.9
• /
• pp.165-169
• /
• 2012

To analogize the result of the test through explaining the correlation of bone mineral density (BMD) test value between proximal femur and lumbar spine at age. It is based on 62 cases who visited the out-patient department. They were classified into three groups by age, group I (30~40 yr) and II (40~60 yr) and III (60~80 yr). Then we evaluated the average and the degree of correlation between the three groups and analyzed the correlation of the three sites according to the BMD result and T & Z-score through the t-test analysis. The results are listed below, first, if rise in age T-score is lower and over 60age occurred osteopenia, second, compared three groups, the correlation of BMD results was some of the highest between Lumbar spine and Proximal femur of T-score & Z-score. the correlation of BMD results is very high. It is regarded that there will be a clinical availability which can analogize the result of a part by using the result of the other part.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.14 no.1
• /
• pp.81-94
• /
• 2003

Objectives：Developmental reading disorder is a condition which manifests significant developmenttal delay in reading ability or persistent errors. About 3-7% of school-age children have this condition. The purpose of the present study was to validate the diagnostic values of Word/Nonword Reading Test and Letter-Symbol Discrimination Task for the purpose of overcoming the caveats of Basic Learning Skills Test. Methods：Sixty-three reading-disordered patients(mean age 10.48 years old) and sex, age-matched 77 normal children(mean age 10.33 years old) were selected by clinical evaluation and DSM-IV criteria. Reading I and II of Basic Learning Skills Test, Word/Nonword Reading Test, and Letter-Symbol Discrimination Task were carried out to them. Word/Nonword Reading Test：One hundred usual highfrequency words and one hundred meaningless nonwords were presented to the subjects within 1.2 and 2.4 seconds, respectively. Through these results, automatized phonological processing ability and conscious letter-sound matching ability were estimated. Letter-Symbol Discrimination Task：mirror image letters which reading-disordered patients are apt to confuse were used. Reliability, concurrent validity, construct validity, and discriminant validity tests were conducted. Results：Word/Nonword Reading Test：the reliability(alpha) was 0.96, and concurrent validity with Basic Learning Skills test was 0.94. The patients with developmental reading disorders differed significantly from normal children in Word/Nonword Reading Test performances. Through discriminant analysis, 83.0% of original cases were correctly classified by this test. Letter-Symbol Discrimination Task：the reliability(alpha) was 0.86, and concurrent validity with Basic Learning Skills test was 0.86. There were significant differences in scores between the patients and normal children. Factor analysis revealed that this test were composed of saccadic mirror image processing, global accuracy, mirror image processing deficit, static image processing, global vigilance deficit, and inattention-impulsivity factors. By discriminant analysis, 87.3% of the patients and normal children were correctly classified. Conclusion：The patients with developmental reading disorders had deficits in automatized visuallexical route, morpheme-phoneme conversion mechanism, and visual information processing. These deficits were reliably and validly evaluated by Word/Nonword Reading Test and Letter-Symbol Discrimination Task.

• Journal of the Korean Society of Radiology
• /
• v.17 no.4
• /
• pp.589-595
• /
• 2023

If complete coronary artery occlusion occurs due to severer coronary spasm, malignant arrhythmias can lead to death. Therefore, early screening for coronary artery spasm angina is essential. Among the test methods, the drug injection test through coronary angiography is generally performed. Therefore, the purpose of this study was to evaluate the advantages of ergonovine drug test for vasospasitc angina examination during coronary angiography, such as the relationship between the procedure time, contrast medium usage, and radiation exposure effects of coronary angiography. Follow-up data of 142 patients who underwent coronary angiography and variant angina examination from september 2021 to february 2023 were used. As a result of analyzing contrast usage dose and dose area product and air kerma dose and number of imaging series and procedure time, variant angina examination was statistically significantly higher than coronary angiography. (p<0.001) In conclusion, variant angina examination other than coronary artery angiography are radiologically negative. Therefore, we think it is better to avoid excessive inspection. Nevertheless, in the case of the provocation test, the longer the examination time, the higher the fluoroscopy time and the amount of contrast medium used, so it is better to conduct the test as quickly as possible or shorten it.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.3
• /
• pp.281-291
• /
• 2006

The aim of this study was performed the clinical test using Netspeg lens for good visual acuity on subjects with abnormal refraction status. The subjects of one hundreds adults (fifty males, fifty females, mean=21 years, range=19 to 24) were recorded. The subjects were researched the history including the systemic health, medication, genetics, allergy, systemic disease and ocular disease. The refraction test was recorded the monocular and binocular using objective method. Visual acuity was performed the binocular status using the Netspeg lens and CR-39. Stereopsis test was performed the titmus fly and TNO at near distance using Netspeg lens and CR-39. The P-VEP test was used the 16 pattern size(Bausch Lomb, production in USA) with three channels. Also Subjects viewed the p-vep stimulus with binocular vision through the corrected visual acuity using the Netspeg lens and CR-39. The contrast sensitivity test was performed the contrast sensitivity chart(pelli-Robertson, USA) at 1m distance using the Netspeg lens and CR-39. The ultrastructure of surface on the Netspeg lens and CR-39 was observed the SEM(JMS-5800, made in Japan). The results of this study was as follows: 1. In corrected visual acuity of abnormal refraction using the Netspeg lens and CR-39, the Netspeg lens wearer were acquired the good visual field and clear visual acuity comparative to CR-39 wearer in the subject vision test. however the comfort of visual acuity was similar results in the Netspeg lens and CR-39. Also the subjects of Netspeg lens wearer was good visual acuity more than CR-39 wearer and in the analysis of P-VEP, the amplitude of wave on Netspeg lens used appears to be better through the CR-39(p>0.5). Besides, on the contrast sensitivity, the Netspeg lens wearer was good results than CR-39. The value on stereopsis with TNO by Netspeg lens wearer was better than CR-39 in results. However, in the stereopsis test with Titmus, the Netspeg lens and CR-39 wearer was similar results. 2. The ultrastructure of Netspeg lens surface was the smooth and fine shape more than CR-39. Also, Netspeg lens have a fine line structure in ultrastructure. In conclusion, the results of this study conformed that the surface ultrastructure of Netspeg lens used is more specific pin hole design structure than CR-39. This study indicated that the vision of Netspeg lens used have a better than CR-39 in the corrected visual acuity for abnormal refraction eye. Therefore, In this paper, we suggested that the ultrastructure and line structure of Netspeg lens was related to good visual function. However the visual function of the aspheric Netspeg and ultra waterproof Netspeg lens was similar results.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.5
• /
• pp.442-448
• /
• 2007

The ultrasonic inspection system for the expansion/transition area of steam generator tube was successfully developed. Variety of artificial flaw and real track specimen was tested using the UT system to verify the performance of the system. All artificial flaws of which through-wall depth larger than 10% was clearly detected by UT system. Measurement results of through-wall depth of flaws larger than 20% had good linearity and reproducibility with 3.27 of standard deviation. Results of real crack specimen test suggested that the detection limit of real crack strongly depends on the track morphology. A potential for measurement of PRL(percentage of remaining ligament) was recognized by the real crack specimen test.