• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7439-7446
• /
• 2015

The purpose of this study was to find the risk factors of injury by FMS and to investigate the effects of 12-weeks' combined training program on body imbalance, physical fitness, muscle strength and FMS score in woman rugby players of the national team. Fourteen subjects were woman rugby national players to participate in the 17th Incheon Asian Games. These players tested FMS and performed 12 weeks' (May~Aug, 2014) combined training program (4days, 120min${\geq}$). Statistical evaluation was undertaken using paired t-test (pre vs. post). The results of this study were as follows; Frist, the score of FMS test on Deep Squat, Hurdle Step, Active Straight Leg Raise, and Trunk Stability Push up were significantly increased after 12 weeks' combined training program (p<.05), and also Inline Lunge (p<.01) and Rotary Stability (p<.001) were significantly increased. However, Shoulder Mobility was not significantly increased(p=.104) although the tendency of increased was FMS score. Second, the sum of the entire item was significantly increased after combined training(p<.001). These results suggest that 12-weeks' combined training program has effect of improving FMS score and low-injury risk in woman rugby national players. Therefore, we consider that FMS have effect on prevention of athletic injury and improvement of athletic performance in woman rugby national players.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1264-1274
• /
• 1999

본 논문에서는 분산된 클록들을 주기적으로 동기화 시키는 분산 실시간 시스템에서 시간적 제약을 만족시키기 위한 정적/동적 시간 제약(timing constraint) 변환 기법을 제안한다. 전형적인 이산클록동기화(discrete clock synchronization) 알고리즘은 클록의 값을 순간적으로 조정하여 클록의 시간이 불연속적으로 진행한다. 이러한 시간상의 불연속성은 시간적 이벤트를 잃어버리거나 다시 발생시키는 오류를 범하게 한다.클록 시간의 불연속성을 피하기 위해 일반적으로 연속클록동기화(continuous clock synchronization) 기법이 제안되고 있지만 소프트웨어적으로 구현되면 많은 오버헤드를 유발시키는 문제점이 있다. 본 논문에서는 시간적 제약을 동적으로 변환시키는 DCT (Dynamic Constraint Transformation) 기법을 제안하였으며, 이를 통해 기존의 이산클록동기화 알고리즘을 수정하지 않고서도 클록 시간의 불연속성에 의한 문제점들을 해결할 수 있도록 하였다. 아울러 DCT에 의해 이산클록동기화 하에서 생성된 태스크 스케쥴이 연속클록동기화에 의해 생성된 스케쥴과 동일함을 증명하여 DCT의 동작이 이론적으로 정확함을 증명하였다.또한 분산 실시간 시스템에서 지역 클록(local clock)이 기준 클록과 완벽하게 일치하지 않아서 발생하는 스케쥴링상의 문제점을 다루었다. 이를 위해 먼저 두 가지의 스케쥴링 가능성, 지역적 스케쥴링 가능성(local schedulability)과 전역적 스케쥴링 가능성(global schedulability)을 정의하고, 이를 위해 시간적 제약을 정적으로 변환시키는 SCT (Static Constraint Transformation) 기법을 제안하였다. SCT를 통해 지역적으로 스케쥴링 가능한 태스크는 전역적으로 스케쥴링이 가능하므로, 단지 지역적 스케쥴링 가능성만을 검사하면 스케쥴링 문제를 해결할 수 있도록 하였고 이를 수학적으로 증명하였다.Abstract In this paper, we present static and dynamic constraint transformation techniques for ensuring timing requirements in a distributed real-time system possessing periodically synchronized distributed local clocks. Traditional discrete clock synchronization algorithms that adjust local clocks instantaneously yield time discontinuities. Such time discontinuities lead to the loss or the gain of events, thus raising serious run-time faults.While continuous clock synchronization is generally suggested to avoid the time discontinuity problem, it incurs too much run-time overhead to be implemented in software. We propose a dynamic constraint transformation (DCT) technique which can solve the problem without modifying discrete clock synchronization algorithms. We formally prove the correctness of the DCT by showing that the DCT with discrete clock synchronization generates the same task schedule as the continuous clock synchronization.We also investigate schedulability problems that arise when imperfect local clocks are used in distributed real-time systems. We first define two notions of schedulability, global schedulability and local schedulability, and then present a static constraint transformation (SCT) technique. The SCT ensures that it is sufficient to check the schedulability of a task locally in a node with a local clock, since the global schedulability of the task is derived from its local schedulability through SCT. We formally prove the correctness of SCT.

• Journal of radiological science and technology
• /
• v.28 no.1
• /
• pp.55-65
• /
• 2005

Research of actual condition of working conditions in the small and clinics, in the Seoul metropolitan city and Kyeonggido province. With the health care environmental change such as a rapid increase of the elderly people, rapid increase of health promotion needs, it is necessary to analyse and identity of the actual condition of working conditions for present and new radiological technologist. Research of general characteristics for the present radiological technologist. To research of the status employment, business scope, pay, working conditions, radiation safety management, equipment, and category association. Defining the problems of related working conditions, radiation safety management for the comprehensive methods to promote the rights the radiological technologist. A proposal for establishment legislature and system of the actual condition in the hospital for radiological technologist. Estimation for the demand and supply numbers of present radiological technologist and improvement of employment relations. Improved and refined scope business and duty regulation related to radiological technologist. Application for the establishment and development of promotion rights to utilize as basic data in a legislative and system frame of reference to implement the radiological technologist.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.185-191
• /
• 2015

This paper suggest the safety class communication board in order to design the safety network of the nuclear safety class controller. The reactor protection system use the digitized networks because from analog system to digital system. The communication board shall be provided to pass the required performance and test of the safety class in the digital network used in the nuclear safety class. Communication protocol is composed of physical layer(PHY), data link layer(MAC: Medium Access Control), the application layer in the OSI 7 layer only. The data link layer data package for the cyber security has changed. CRC32 were used for data quality and the using one way communication, not requests and not responses for receiving data, does not affect the nuclear safety system. It has been designed in accordance with requirements, design, verification and procedure for the approving the nuclear safety class. For hardware verification such as electromagnetic test, aging test, inspection, burn-in test, seismic test and environmental test in was performed. FPGA firmware to verify compliance with the life-cycle of IEEE 1074 was performed by the component testing and integration testing.

• Journal of radiological science and technology
• /
• v.29 no.2
• /
• pp.63-69
• /
• 2006

In diagnostic ultrasound, the quality of image affect to diagnose. To maintain suboptimal imaging uniformly, Quality Assurance of Ultrasound equipment should take periodically. This is article about examination the quality of image in diagnostic ultrasound to understand conditions of probes in hospitals. There is comparative study of convex and linear probes on ultrasound using tissue-mimicking phantom included simulated cysts, echogenic structures. The ultrasonic attenuation coefficient versus frequency of 0.5 dB is representative of normal liver and 0.7 dB is representative of fatty liver condition in ultrasound phantom. There are results of convex probe, 0.5 dB, vertical group, cystic masses, high contrast masses are mostly shown but 0.7 dB, mid level in vertical group, cystic masses and high contrast masses are nearly visible. In linear probe, 0.5 dB, mid level in vertical group, two or four of them are shown in cystic masses and high contrast masses but there are not visible in 11 of cases. 0.7 dB, there are mostly appear under 6 in vertical group, two or four of them show in cystic masses and high contrast masses and there are not shown in 40 of cases, besides. Linear probes in fatty liver condition of ultrasound instrument are not good in the quality of image practically. So there needs to be replace and fix of probes. Actually management of ultrasound probes is inadequate in hospitals. So if there are program of evaluation to check probes periodically in hospitals from establishment of the ultrasound equipment, there will get better image and have a suitable condition of instruments further more.

• Korean Journal of Microbiology
• /
• v.54 no.1
• /
• pp.24-30
• /
• 2018

Norovirus infection is a leading cause of nonbacterial gastroenteritis outbreaks. New variants of GII.4 have emerged approximately every 2~3 years and have caused norovirus gastroenteritis pandemics globally. In this study, analysis and molecular genetic characteristics of the norovirus gastroenteritis outbreaks 2,917 samples in Gyeonggi-Do from 2014 to 2015. As a result, 247 samples out of 2,917 samples are positive for norovirus. Norovirus molecular genetic characteristics of the GI 8 types (GI-1, 2, 3, 4, 5, 6, 12, 14), GII 10 types (GII - 2, 3, 4, 5, 6, 11, 12, 14, 16, 17). Genome sequences of isolated noroviruses were similar to those of new GII.17 Kawasaki 2014 variants with 96.6 identity, suggesting that these viruses were imported from overseas. 44% of virus incidence was originated from school meal service. Therefore, a continuous monitoring and school sanitation should be required for preventing a massive virus outbreak.

• The Journal of the Korea Contents Association
• /
• v.9 no.6
• /
• pp.216-224
• /
• 2009

The purpose of this study was to examine the periodontal disease awareness and periodontal health status of industrial workers in an attempt to help facilitate their prevention and treatment of periodontal diseases. The findings of the study were as follows: 1. In regard to a knowledge acquisition route on periodontal diseases, the largest number of the industrial workers investigated(36.3%) learned about the diseases from dental hospitals. As to scaling cycle, the younger workers deemed it necessary to get their teeth scaled every six months. In contrary, the older workers considered it advisable to do that about once a year. Age made a statistically significant difference to that (p<.05). 2. As for the state of the periodontal diseases of the workers, the greatest group (26.5%) found themselves to have something between their teeth often. The second most prevalent peridontal disease was gingival bleeding(24.5%), and the third largest group(24.5%) had teeth that were sensitive to cold. The fourth greatest group(15.9%) had the swollen gums from time to time, and the fifth largest group(4.5%) had shaken teeth. 3. Concerning the cause of periodontal diseases, the largest group (48.8%) cited an incorrect toothbrushing. As to the prevention of periodontal diseases, the greatest group(66.8%) viewed the right toothbrushing as the best way for that as well.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.221-221
• /
• 2019

기후변화로 인한 가뭄대비가 상시체제가 된 요즈음, 농업용수의 안정적인 공급을 위하여 가뭄 등의 비상시 지표수는 물론이고 지하수의 공급 가능량에 대해서도 국가적 관리가 필요한 실정이다. 지하수관리를 위해 국가 최상위 계획인'지하수관리기본계획(2012~2021)'이 수립되었고, 지하수의 장기적인 수량, 수질 관리를 위해 국가지하수관측망, 지역지하수관측망(보조지하수관측망), 수질측정망, 해수침투관측망 등 광역과 지역단위로 크게 나누어 지하수관측이 이루어지고 있다. 국가지하수관측망은 지하수법에 의거하여 전국의 주요지점(2016년 말 기준 412개소)에 관측소를 설치하여 수위 및 수질의 변동실태를 광역적으로 분석함이 목적이며, 보조지하수관측망은 국가지하수관측망과 연계하고 보완하기 위한 기능으로서, 지역별 주요 관측지점의 수위, 수질자료를 획득하며, 2018년 9월 현재 3,429개소가 설치되어있다. 본 연구에서는 지역지하수 관측망 중 경남밀양지역에 설치된 관측정 31개소에 대해 수위와 수질을 장기 분석하였다. 밀양지역의 보조지하수관측망 설치는 지하수관리계획의 하부계획인'경상남도 지하수관리계획(2015~2025)'에 의거 2012년에 6개소의 관측공이 설치를 시작으로, 2013년 7개소, 2014년 10개소, 2015년 8개소를 설치하여 총 31개소의 설치를 완료하였고, 2016년부터 2019년 현재까지 전체 관측정 31개소에 대하여 관측 운영 중이다. 본 연구에서는 2013년 1월~2019년 1월까지 지역의 누적강수량과 지하수위 및 수질변화를 관측하였다. 전 관측정에 대해 수위(GL.m), 수질(온도, EC)은 1시간 주기로 관측하였으며, 연 2회 생활용수 기준(19항목)의 수질검사를 실시하고, 지하수성분의 지질학적 기원분석을 위한 양음이온 분석을 연 1회 실시하였다. 관측정의 양수능력 변화관측을 위해 대수성 시험을 연 1회 실시하였고, 관측정의 특성상 장기간 미사용 관정이므로 최적의 상태유지를 위해 연1회 공내세척을 실시하였다. 또한, 관측정의 지형별 차이를 분석하기 위해 관측정의 설치위치를 산악, 강변, 기타 지역으로 구분하고, 각각의 대표관정에 대해 지형에 의한 서로 다른 영향을 분석하였고, 관측정의 심도별 변화를 알기위해 동일지역에 충적, 안반 관측정을 따로 설치하고 관측하여 지표수와 지하수의 심도별 영향의 차이를 분석하였다. 동일지역의 관측결과 평균 5m이하의 수위변화를 보이나, 5m 이상의 수위변동을 보이는 관측망은 15년 14개소 17년 19개소로 증가추세를 보이며, 이는 주로 밀집된 시설하우스 단지의 수막재배를 위한 겨울철 지하수 사용량 증가가 원인인 것으로 판단된다. 밀양지역은 강변지역에 밀집된 시설하우스단지의 동절기 수막재배를 위한 지하수 과다사용으로 수위급감 및 수량부족현상이 반복되고 있어, 예방과 대책강구를 위해 지표수의 함양과 지하수사용량의 상관관계 분석과 자료축적 및 추가연구를 위한 장기관측이 요구된다.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_3
• /
• pp.1425-1434
• /
• 2021

Continuous and periodic data acquisition must be preceded to maintain and manage the river facilities effectively. Adapting the existing general facilities methods, which include river surveying methods such as terrestrial laser scanners, total stations, and Global Navigation Satellite System (GNSS), has limitation in terms of its costs, manpower, and times to acquire spatial information since the river facilities are distributed across the wide and long area. On the other hand, the Mobile Mapping System (MMS) has comparative advantage in acquiring the data of river facilities since it constructs three-dimensional spatial information while moving. By using the MMS, 184,646,009 points could be attained for Anyang stream with a length of 4 kilometers only in 20 minutes. Levee points were divided at intervals of 10 meters so that about 378 levee cross sections were generated. In addition, the waterside maximum and average slope could be automatically calculated by separating slope plane form levee point cloud, and the accuracy of RMSE was confirmed by comparing with manually calculated slope. The reference slope was calculated manually by plotting point cloud of levee slope plane and selecting two points that use location information when calculating the slope. Also, as a result of comparing the water side slope with slope standard in basic river plan for Anyang stream, it is confirmed that inspecting the river facilities with the MMS point cloud is highly recommended than the existing river survey.

• The Korean Journal of Archival Studies
• /
• no.14
• /
• pp.91-117
• /
• 2006

Electronic Records need to be appraised the authenticity as well as the value itself. There has been various kinds of discussion about how records to be appraised the value of themselves, but there's little argument about how electronic records to be appraised the authenticity of themselves. Therefore this article is modeling some specific authenticity appraisal methods and showing each stages those methods should or may be applied. At the Ingest stage, integrity verification right after records creation in the organization which produced the records, quality and integrity verification about the transferred in the organization which received the records and integrity check between SIP and AIP in the organization which received and preserved the records are essential. At the Preservation stage, integrity check between same AIPs stored in different medium separately and validation of records where or not damaged and recovery damaged records are needed. At the various Processing stages, suitability evaluation after changing the record's management control meta data and changing the record's classification, integrity check after records migration and periodical validation and integrity verification about DIPs are required. For those activities, the appraisal methods including integrity verification, content consistency check, suitability evaluation about record's meta data, feasibility check of unauthorized update and physical status validation should be applied to the electronic records management process.