• Proceedings of the Korean Society of Food Science and Nutrition Conference
• /
• 2000.11a
• /
• pp.115-123
• /
• 2000

식품의 관능검사는 인간의 의식과 식품간의 반응결과를 객관적으로 나타내는 방법으로 수치, 언어적 묘사, 도표 등의 표현법을 사용하고 있으며 검사 요원들 간의 오차를 발생한다. 이 오차를 줄이기 위하여 통계 및 심리학적으로 접근하여 해결을 시도해 오고 있으며 오차를 심리적 잡음 (psychological noise)이라고 주장되고 있다. 식품의 기호도는 감각신경세포에서 전기적 신호로 전환되어 뇌에 전달되고 의식의 분석과 해석을 거쳐 얻어지는 것이므로 전기적 신호처리가 포함된다. 그러나 현재의 관능검사 방법들은 시간의 함수관계를 중시하고 있지 않다. 감각신경의 신호 전달체계의 유사성을 바탕으로 관능검사과정에 시간함수를 도인하는 개념이 요구된다. 시간을 개입하는 방법론으로 의식과 식품간의 일어나는 순차적 또는 병열적 행동과 의식체계를 분석하고 시간인자의 중요성을 부각시켰다. 시간함수의 도입방법으로 관능영향인자 표의 구성하고 bar-code를 생성하는 프로그램과 파형곡선으로 전환하는 개념을 제안하였다.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1987.05a
• /
• pp.7.3-8
• /
• 1987

청성뇌간 유발반응이 Juwett 및 Sohmer와 Feinmesser에 의하여 보고된 이래 타각적 청력검사로서 임상적응용에까지 이르렀다. 타각적 청력검사는 반응역치와 청각역치의 오차가 적어야 하며 주파수별로 역치측정이 가능하여야 하며 개인차가 적고 반응의 재현성이 높아야 되며 반응의 판정이 용이해야 함이 필요조건으로서 이러한 조건이 피검자의 수면상태하에서도 충족되어야 한다. 저자들은 정상 성인 청력자를 대상으로 sedation전후의 ABR에 대한 latency 및 amplitude를 중심으로 관찰하여 다음과 같은 결과를 얻었다. 1) Sedative의 사용에 있어서 amplitude및 latency의 차이는 없었다. 2) Sedative의 사용에는 무관하게 low frequency filter에서 high frequency filter보다 voltage의 유의한 차가 있었다.

• Journal of The Korean Association For Science Education
• /
• v.39 no.3
• /
• pp.363-377
• /
• 2019

This study reveals the aspects of subjectivity in the test results in a science-specific aspect when assessing science-related affective characteristic through self-report items. The science-specific response was defined as the response that appear due to student's recognition of nature or characteristics of science when his or her concepts or perceptions about science were attempted to measure. We have searched for cases where science-specific responses especially interfere with the measurement objective or accurate self-reports. The results of the error due to the science-specific factors were derived from the quantitative data of 649 students in the 1st and 2nd grade of high school and the qualitative data of 44 students interviewed. The perspective of science and the characteristics of science that students internalize from everyday life and science learning experiences interact with the items that form the test tool. As a result, it was found that there were obstacles to accurate self-report in three aspects: characteristics of science, personal science experience, and science in tool. In terms of the characteristic of science in relation to the essential aspect of science, students respond to items regardless of the measuring constructs, because of their views and perceived characteristics of science based on subjective recognition. The personal science experience factor representing the learner side consists of student's science motivation, interaction with science experience, and perception of science and life. Finally, from the instrumental point of view, science in tool leads to terminological confusion due to the uncertainty of science concepts and results in a distance from accurate self-report eventually. Implications from the results of the study are as follows: review of inclusion of science-specific factors, precaution to clarify the concept of measurement, check of science specificity factors at the development stage, and efforts to cross the boundaries between everyday science and school science.

• Journal of Digital Convergence
• /
• v.11 no.3
• /
• pp.371-380
• /
• 2013

The purpose of this study was to develop the equation of $\dot{V}O_{2max}$ by $sub_{max}imal$ PACER method for obese middle school boys. For this, $_{max}$imal test using Bruce protocol in lab was performed and then PACER $_{max}imal$ test with portable $\dot{V}O_{2max}$ equipment. To decide the level of submaximal test, during PACER with portable equipment, we found the section in which target hreat rate(over 75%$HR_{max}$) and then per section(75%,80%,85%,90%,95%) metabolic responses were recorded, with which we analyzed multiple regression by stepwise method. Model 1(at 90%$HR_{max}$): $\dot{V}O_{2max}$(ml/kg/min) = 142.721-0.275(repetition)-0.48(HR)+0.177(weight)-1.536(age)[%error 3.90ml/kg/min; performance until 2 stage(13 repetition)]. Model 2(at 95%$HR_{max}$): $\dot{V}O_{2max}$(ml/kg/min) = 182.851-0.103(repetition)-0.744(HR)+0.186(weight)-0.324(age)[%error 4.51ml/kg/min; performance until 3 stage(25 repetitions)]. estimated $\dot{V}O_{2max}$ from Model 1 was different about $3.25{\pm}6.32ml/kg/min$(%error=6.84%), otherwise model 2 was $3.16{\pm}4.54ml/kg/min$(%error=5.75%). considering %HRmax, as the submaximal test model 1 might be fit more than model 2 for obese middle school boys.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.3
• /
• pp.385-390
• /
• 2015

Purpose: This study evaluated the static stereoacuity by Distance Randot Stereotest (STEREO OPTICAL. Co., Inc. USA) and the dynamic stereoacuity by three-rods test (iNT, Korea). Criterion and correlation of stereoacuity between both tests and usefulness of two stereotest methods were also evaluated. Methods: For normal adults of 109 (male 61, female 48), mean age of 20.88 (19-32 years) years old, static stereoacuity by using Distance Randot Stereotest at 3 m distance, dynamic stereoacuity by using three-rods test at 2.5 m distance were measured. Results: The mean of distance static stereoacuity was $155.77{\pm}133.11sec$ of arc and the mean of error distance dynamic stereoacuity $11.13{\pm}9.69mm$. With equivalent-conversion stereoacuity of $23.44{\pm}20.96sec$ of arc, there was statistically significant differences (p=0.00) between two dynamic stereoacuity, but correlation was relatively low (${\rho}=0.226$). In the case of dynamic stereoacuity, separated to normal range by criterion of the error distance 20 mm, it showed the error distance of less than 20 mm in 97 subjects(89%) whose average of error distance and conversion mean dynamic stereoacuity were $8.43{\pm}5.10mm$ and $17.68{\pm}10.67sec$ of arc. repectively. The error distance of was equivalent-conversion dynamic stereoacuity 40.99 sec of arc (PD 62 mm basis) was 20 mm. Conclusions: The results of lower correlation between static and dynamic stereoacuity suggest that seterotest should be applied separately to different functions. The results of this study also suggest that Distance Randot Stereotest can be applied to static stereoacuity excluding monocular cues. Three-rods test can be applied to dynamic stereoacuity containing the response of the eye-hand coordination in the daily life of natural vision condition, including the monocular cues. These different approaches canprovide a criterion of the two stereoacuity and parallel use of the two tests would be useful. For dynamic stereoacuity by three-rods test, error distance 20 mm in a normal range of adults can be used as a criteria to get statistical meaning of the results.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.100-107
• /
• 2007

AABR(automated auditory brainstem response) test is used for the screening purpose of hearing ability of neonates. In this paper, algorithm using Rolle's theorem is suggested for automatic detection of the ensemble averaged ABR waveform. The ABR waveforms were recorded from 55 normal-hearing ears of neonates at screening levels varying from 30 to 60 dBnHL. Recorded signals were analyzed by expert audiologist and by the proposed algorithm. The results showed that the proposed algorithm correctly identified latencies of the major ABR waves (III, V) with latent difference below 0.2 ms. No significant differences were found between the two methods. We also analyzed the ABR signals using derivative algorithm and compared the results with proposed algorithm. The number of detected candidate waves using the proposed algorithm was 47 % less than that of the existing one. The proposed method had lower relative errors (0.01 % error at 60dBnHL) compared to the existing one. By using proposed algorithm, clinicians can detect and label waves III and V more objectively and quantitatively than the manual detection method.

• Journal of Radiation Protection and Research
• /
• v.27 no.1
• /
• pp.51-57
• /
• 2002

An electronic personal dosimeter(EPD) with hybrid type preamplifier adopting a semiconductor detector as a radiation detector has been developed, manufactured and test-evaluated. The radiation detection characteristics of this EPD has been performance-tested by using a reference photon radiation field. After several test-irradiations to a $^{137}Cs$ gamma radiation source the radiation detection sensitivity of this EPD appeared to be $3.8\;cps/Gy{\cdot}h^{-1}$. The linearity of radiation response was kept within 8% of the dose equivalent ranges of $10{\mu}Sv{\sim}4Sv$ and the angular dependence was under less than 4% in angles of ${\pm}60^{\circ}$. It was confirmed that the energy response range was in $60{\sim}1,250keV$ given in the ISO standard. This EPD satisfied the international criteria for the EPD in the mechanical and the environmental performance test for 9 test categories according to IEC 61526.

• Journal of radiological science and technology
• /
• v.25 no.2
• /
• pp.71-75
• /
• 2002

According to this study, we can make the radiation check meter which have not supply because of high cost and import barrier and lengthen its life by means of repairing of radiation bomb and equipment. We can make better medical service. In my study, I used the photodiod, photoelectron, among semiconductor detectors which have a excellent detect capacity and are low cost and small size. I set up this equipment in June 1, 2002, used 640 mA remote operative fluorography equipment, which make the grade as capacity test. I used the standard measuring instrument which took proofs from a agency, now it was using in measuring agency. The comparative measuring instrument used in same condition. I took the standard which was gauged with a connecting measuring instrument. Using a existing unconnected measuring instrument, I compared the accuracy with new unconnected one. As a result, three score are within the standard. For the detailed analysis, I took the average of percentage average error. So standard instrument was -0.02, comparable was -0.22, and new one was -0.17. New one took a closer measured value with standard than comparable one. In more study, I think to take more accurate value. I expect that my study will be a base of measuring instrument, with low cost, supply of this instrument increase, I expect to decrease radiation bomb and maintain, repair and manager better.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.387-391
• /
• 1997

냉각재중의 방사능을 띤 성분 중에는 이온교환기에서 제거가 가능한 이온성분과 함께 필터에 의해서 주로 제거되는 입자성 물질로 존재한다. 운전중의 냉각재내 방사성 부식생성물의 물리적 조성 분포 측정 결과에 따르면 90%이상이 0.45$mu extrm{m}$필터에 의해 제거되는 입자성 물질로 구성되어 있다. 이로 인해 새수지 충전후 얼마 사용하지 않은 탈염기의 제염계수가 탈염기에서 완벽한 제거가 어려운 입자성 부식생성물로 인해 10이하를 나타낼 수 있다. 1차계통에 쓰이는 수지의 성능검사를 위해 사용하고 있는 현재의 제염계수 측정법은 다음과 같은 두가지 이유로 완벽하지 않음을 알 수 있다. 첫째, 냉각재중의 방사능을 띤 성분중에는 이온교환기에서 제거가 가능한 이온성분과 함께 필터에 의해 제거되는 입자성 물질도 함께 존재하므로 탈염기의 제염계수 측정 절차는 입자성 물질을 배제한 후 측정해야 하며, 특히 수치 교체를 결정하기 위한 제염계수 측정시에는 여과된 여액으로 방사능 농도를 측정하는 것이 바람직하다. 둘째 운전중인 냉각재의 시료중에는 핵분열 수율이 높고 핵연료봉 손상부위로 유출이 용이한 불활성 기체핵종들이 많이 존재하며, 탈염기 후단에서 채취한 시료중에도 많이 존재하고, 시료 이송과 방사능 측정동안의 짧은 시간동안에도 계속 붕괴반응함으로서 새로 생긴 핵종으로 인해 마치 탈염기의 제거능이 낮은 것으로 오판될 수 있다. 이러한 측정 오차인자를 고려하여야 1차계통 탈염기의 교환능력을 정확히 판정할 수 있다.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.498-504
• /
• 2006

A suspension polymerization of styrene In aqueous phase was employed to study if polystyrene particles ranging from 1 to $20{\mu}m$ can be produced. Hydrophobic silica was selected as a stabilizer and azo-bisisobutyronitrile (AIBN) as an initiator. Polymerization reaction was carried out at a selected temperature in the range of $65{\sim}95^{\circ}C$. Stabilizer concentration was varied from 0.17 to 3.33 wt% compared to the water while the concentration of the initiator was raised from 0.13 to 6.0 wt% compared to the monomer. Dispersion of hydrophobic silica into the water phase was achieved by precise control of pH. Optimum dispersion of silica was obtained at pH 10. Average particle diameter decreased with increasing amounts of stabilizer concentration initially, exhibiting the minimum average diameter at 1.67 wt% of stabilizer concentration, after which it started to Increase. It is speculated that an excessive presence of stabilizer encouraged a secondary reaction in the reaction medium, which led to particle agglomeration, and as a result an increase in average particle diameter. Molecular weight was found to be independent of stabilizer concentration between 0.13 and 1.00 wt% whereas, it increased when stabilizer concentration exceeded 1.67 wt%. Variation of molecular weight was probably caused by the reduced activity and efficiency of initiator due to the high concentration of silica, and the secondary reaction in the reaction medium, as well. An increase in the Initiator concentration and/or reaction temperature resulted in an increase in both reaction rate and particle diameter. Consequently, we have confirmed that spherical polystyrene particles with $1{\sim}20{\mu}m$ in diameter can be prepared by careful selection of the concentration of stabilizer, initiator, pH and reaction temperature.