• Analytical Science and Technology
• /
• v.21 no.1
• /
• pp.48-52
• /
• 2008

A new forensic saliva test method using $SALIgAE^{(R)}$ was evaluated in this study. The sensitivity and specificity of $SALIgAE^{(R)}$ were examined and compared to those of other saliva test methods such as agarose gel diffusion method and $Phadebas^{(R)}$ test sheet method. $SALIgAE^{(R)}$ showed high sensitivity and specificity to human saliva in addition to quickness. Moreover modified $SALIgAE^{(R)}$ method was cheap and easy to use in crime scene and DNA laboratory. $SALIgAE^{(R)}$ was very stable at room temperature and had no effect on STR typing.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.236-246
• /
• 2004

Artificial carious lesions in various depths were observed with visual examination using light transillumination, bite-wing radiography, laser fluorescence, and dye-enhanced laser fluorescence to determine the reproducibility, correlation of each diagnostic method, diagnostic sensitivity and diagnostic specificity. And optical densities according to demineralized times were measured whether laser fluorescence could be used as a quantitative diagnostic method. The following results were obtained whether laser fluorescence could be used for diagnosis of initial proximal caries. 1. Tau-c values of visual examination was 0.08 which showed lowest reproducibility and those of bite-wing radiography, laser fluorescence, dye-enhanced laser fluorescence were 0.60, 0.48, and 0.64, respectively which showed relatively high reproducibility. 2. The correlation between demineralization time and each examination was the highest in dye-enhanced laser fluorescence$({\gamma}=0.51)$ followed by laser fluorescence$({\gamma}=0.43)$, bite-wing radiograph$({\gamma}=0.35)$, and visual examination$({\gamma}=0.33)$. Dye-enhanced laser fluorescence and laser fluorescence showed significant correlation with demineralization time. 3. The sensitivity of laser fluorescence and dye-enhanced laser fluorescence for diagnosing approximal caries based on bite-wing radiography were 67%, 100% and those of specificity were 57%, 11% which showed diagnostic specificity was relatively lower than sensitivity. 4. The difference in optical density(DFR) between sound teeth and carious lesions according to lesion depth was high with dye-enhanced laser fluorescence compared with laser fluorescence. DFR measured with laser fluorescence according to changes in lesion depth was statistically significant but was not statistically significant with dye-enhanced laser fluorescence. Based on these results, laser fluorescence and dye-enhanced laser fluorescence have comparable diagnostic power as bite-wing radiography in early diagnosis of proximal caries.

• Proceedings of the KSLP Conference
• /
• 1995.11a
• /
• pp.165-180
• /
• 1995

복잡한 음성장애를 이해하기 위해서는 음성관에 대한 여러 단계에서의 정량적인 검사가 이루어져야 한다. 이를 위하여 여러 가지 검사 법이 이용되고 있는데 예를 들면 음성의 인지적 검사(perceptual intelligibility), 음향음성학적검사(acoustic analysis), 공기역동학적 검사(aerodynamic study), 후두구조물의 운동 관찰, 그리고 근과 신경의 기능 검사(electromyographic study)등이 있다. 이중 인지적 검사는 청취자 동의 문제와 검사 법에 대하여 문제점이 제기 되기도 하며 발화 중 후두기능의 병태생리에 관한 추론적인 정보만을 제공한다는 문제점이 있다. 음향음성 검사는 이미 잘 알려진 상태로서 많은 parameter들이 측정되어온 것이 사실이나 그 유용성에 대해서도 아직 논란이 있으며 단지 성대의 진동에 의해 나타나는 현상만을 이용한 검사로서 일종의 정지성 연구에 불과한 것이 사실이다. (중략)

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.1
• /
• pp.59-67
• /
• 2014

Purpose: The present study was aimed to compare the results of disinfection efficacy tested by membrane filtration method with dilution-neutralization method to develop the standard methods for evaluating disinfection efficacy of contact lens care products and to provide the result of disinfection efficacy of commercially available contact lens care products in domestic market. Methods: The results of disinfection efficacy against Staphylococcus aureus, Pseudomonas aeruginosa, Serratia marcescens, Candida albicans evaluated by membrane filtration method as a FDA standard and dilution-neutralization method as newly being a KFDA standard were compared and the disinfection efficacy of 16 multi-purpose solutions was further evaluated. Results: The disinfectants and contact lens care products having strong disinfection efficacy showed same results in both membrane filtration method and dilution-neutralization method. In case of contact lens care products having weak disinfection efficacy, the number of micro-organisms was not able to count since the colony was aggregated when evaluated by membrane filtration method. However, the number of micro-organisms was able to exactly count when evaluated by dilution-neutralization method. In addition, some commercially available contact lens care products did not meet disinfection standard and especially, their disinfection effect was often weak against Serratia marcescen and Candida albicans. Conclusions: It is concluded that dilution-neutralization method will be useful to evaluate disinfection efficacy since it is possible to count micro-organisms more precisely even with small amount of sample and check the results faster compared with membrane filtration method.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.3
• /
• pp.78-87
• /
• 1994

생물학 및 의학등의 생명과학에서는 현미경을 이용하여 생체물질 즉, 생체조직을 관찰하고 이에 대한 조직의 검사 결과를 판정하고 발표한다. 이때 필히 고정과정(fixation process)을 거쳐야 한 다. 즉, 생체조직중 조직의 구조, 특정 세포나 바이러스 및 효소등을 관찰할 때 고정과정을 거쳐 조직을 절편하고 이를 염색하여 현미경으로 검사하게 된다. 고정과정이란 생체물질을 안정화시키고 자기분해 혹은 부패를 방지하여 보존이 가능하도록 변화시키 는 과정으로, 조직내의 용해성 물질을 불용성 물질로 변형시키는 과정이다. 고정과정을 거친 생체조직 은 구조를 보존하고 있기 때문에 조직의 훼손이 없는 상태에서 절편이 가능하고 또한 염색상태를 좋게 하며 관찰시 contrast를 증진시킨다. 만약 고정과정을 거치지 않으면 물질의 세포막이 파괴되고 단백질 등의 물질이 용해되어 조직의 변형을 일으켜 제대로 조직을 관찰할 수 없게 된다. 고정과정에는 크게 화학적 고정법과 물리적 고정법이 있다. 화학적 고정법은 생체조직을 화학용액에 처리하는 방법이며, 물리적 고정법은 직접적인 열 혹은 초음파등으로 물질을 고정시키는 방법이다. 표 면과 내부의 열전도가 달라져 고정이 균일하게 되지 않는 단점을 가지고 있기 때문에 보통 2~6일의 고 정시간을 요하는 화학적 고정법을 사용하고 있다. 따라서 조직에 대한 총 검사시간이 최소 6일에서 최 대 12일이 요구된다. 병원등에서 조직검사의 결과가 늦게 발표되는 사유는 바로 화학적 고정법을 사용 하여 생체조직을 관찰하고 그 결과를 판정하기 때문이다. 본 고에서는 마이크로파를 이용하여 약 3시간만에 조직의 상태를 관찰할 수 있는 고정법을 소개한다. 마이크로파를 이용하여 조직을 고정하는 고정방법을 기존의 고정법과 비교하여 이들의 장단점을 나타 낸다. 본 연구자에 의해 개발된 마이크로파 고정기를 소개하고, 이를 이용하여 생체물질을 고정한뒤 절 편, 염색하여 현미경 관찰결과를 발표하여 본 연구의 방법이 기존 방법보다 우수함을 나타낸다.

• MALSORI
• /
• no.spc1
• /
• pp.95-103
• /
• 2002

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.2
• /
• pp.81-86
• /
• 2005

This paper proposes a non-destructive ESPI technique to quantitatively evaluate defects inside a semiconductor package. The inspection system consists of the ESPI system, a thermal loading system and an adiabatic chamber. The technique is high feasibility for non-destructive testing of a semiconductor and overcomes the weaknesses of previous techniques, such as time-consumption and difficult quantitative evaluation. Most defects are classified as delamination defects, resulting from the insufficient adhesive strength between layers and from non-homogeneous heat spread. Ninety percent of the tested samples had delamination defects which originated at the corner of the chip and nay be related to heat spread design.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.2
• /
• pp.43-50
• /
• 2019

Purpose The principle of nuclear medicine test is divided into two main categories: competition(radioimmunoassay, RIA) and noncompetitive reaction(Immunoradiometric assay, IRMA). It is known that the curve fitting method, which is commonly used in inspection field, uses Spline interpolation in RIA method and Linear interpolation method in IRMA method. Among them, the insulin test using the IRMA test showed a significant difference, especially at low concentrations, despite the same algorithm of linear interpolation between fully automated radio immunoassay analyzers. In this study, we aim to obtain results from applying two different of algorithm using fully automated radio immunoassay analyzers including Gamma pro, Gamma 10, Cobra, and SR300. Materials and Methods A total of 30 test samples were selected for the test of TSH, ferritin, C-peptide, and insulin serum levels. Test was performed by IRMA method. We compared the difference in the results of applying the linear interpolation method and the spline interpolation method to Gamma Pro, Gamma 10, Cobra, and SR300 equipment. Results Two-way ANOVA was used for statistical analysis. The significance level was applied as P <0.05. The results of TSH, ferritin, C-peptide, and insulin tests were compared between the fully automated radio immunoassay analyzers. There was a significant difference between ferritin, C-peptide, and insulin serum levels(P<0.001). TSH didn't show any significant different between the devices(P=0.29). In the difference between linear and spline interpolation, there was no significant difference between insulin test(P=0.08), TSH test(P=0.81), and Ferritin test(P=0.06). However, C-peptide test showed a significant difference(P=0.03). Especially, the insulin test showed significant difference in lower ranges. As a result of comparing and analyzing the difference between the two interpolation methods, the devices in the low concentration group showed significant difference(P<0.001). Conclusion In case of new equipment in the laboratory it is necessary to recognize that there is a difference in the curve fitting method for each automated radio immunoassay analyzers in the low concentration area when the principle of inspection is IRMA method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.2
• /
• pp.116-129
• /
• 2000

Due to the great complexity of the physical phenomena involved in most ultrasonic nondestructive testing, the numerical method is effective in many cases of their theoretical modeling. A brief overview is provided in this paper of the numerical methods used in modeling ultrasonic nondestructive testing, with an emphasis on the finite difference and the finite element methods. The procedures of execution, special considerations required, and some previous research results of the finite difference and the finite element methods are presented, with a rather extensive list of work reported in the literature. These numerical modeling techniques for ultrasonic nondestructive testing are expected to be more reliable and more convenient, as a result of the continuing technological development of computers.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.1
• /
• pp.60-67
• /
• 2021

Electroencephalography (EEG) is used for the diagnosis of epilepsy and testing the brain function. Clinical technologists are responsible for recording EEG without artifacts in accordance with the international 10~20 electrode system. Training on these techniques requires practical education. In the case of EEG, however, it is difficult for trainees to find the correct location of the electrode. Therefore, this study compared the time spent to locate the electrode attachment between traditional tape and the newly developed band. The time spent for sitting position patients using the band (196.7±61.8s) was 1084.3 s faster than the tape (1,281.0±457.4s) (P<0.001). Furthermore, the spend time spent for lying position patients using the band (200.2±49.3s) was 1217.7s faster than the tape (1417.9±482.3s) (P<0.001). Measurements using the band showed fewer differences due to various factors, such as position, practical experience, and gender. The newly developed band can locate the correct electrode attachment position quickly and efficiently, which has been a difficult problem in EEG practical education. In addition, this band is expected to be applied widely by new clinical technologists in the clinical field. Nevertheless, more study will be required to verify the accuracy of the location of the attaching electrode.