• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.189-190
• /
• 2003

섬유강화 복합재료의 사용이 점점 증가함에 따라 구조용 및 내장재 등으로 사용된 수명이 다한 섬유강화 복합재료의 사용후 폐기가 문제가 되고 있다. 특히, 자동차 부품, 건축자재 및 전기절연재 등으로 가장 많이 사용되는 유리섬유 복합재료의 폐기물이 급격히 증가하여 환경 오염문제가 심각해지고 있어서, 환경 친화적인 새로운 복합재료에 대한 필요성이 제기되어 왔다. 따라서 본 연구에서는 천연섬유를 이용한 천연섬유/생분해성 수지계 복합소재를 대상으로 환경적합성이 우수하고 자연환경에서 완전한 생분해성을 가지며, 유리 섬유복합재료를 대체할 물성이 우수한 새로운 Biocomposite를 개발하고자 하였다. (중략)

• KIEAE Journal
• /
• v.4 no.4
• /
• pp.3-10
• /
• 2004

If move in in the new apartment usually, do that hundreds hazardous substance among air floats and is broken-down. In the case of the floor, organic compound turns in adhesives that is bitter when attach the reinforcement floor and material lumber and hazardous substance is exhausted much wallpaper and concrete. Therefore, to reveal maximum this research to apply on interior of building to live function of charcoal, at non combustible material two faces that can promise safety from fire, strong and satisfy light performance, and it is thing about development of sheathing that use recycling material for barren land of multi-function and surface treatment of charcoal board as well as can keep healthy indoor environment.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2001.11a
• /
• pp.124-129
• /
• 2001

점 용접부는 응력상태가 복잡하고, 피로균열은 판 두께, 너겟 직경, 용접 타점수, 부하 방식 등의 역학적인 인자와 재질, 화학성분, 표면 상태 등의 재료적인 인자, 그리고 용접전류, 가압력, 통전 시간등의 용접적인 인자의 영향을 동시에 받으며 3차원적으로 성장하므로 균열 성장 모드는 항상 혼합보드이고 균열이 박판 내면에서 발생. 성장하므로 검출이 곤란하여 균열 성장의 해석 및 예측이 어렵다/sup 1)/. 따라서 비접촉, 실시간, Whole-field, 레이저 파장 단위까지 측정이 가능하여 기존의 방법들의 문제점을 극복할 수 있고, 반도체와 같은 소형의 제품뿐만 아니라 기존에 측정하지 못했던 초고온, 대형 구조물의 변형도 정확하게 측정을 할 수 있는 ESPI법을 이용하여 일반가전 제품, 자동차 건축용에 많이 사용되고 있는 아연도금강판(SGCC)을 선택하여 단일 용접조건으로 점용접의 피치를 변화시켜 시험편을 제작하고 면외변위를 다각도로 측정하여 그 가능성을 검증하고자 한다.(중략)

• KIEAE Journal
• /
• v.12 no.3
• /
• pp.83-88
• /
• 2012

This study analyzed the measured value came out by the field test to verify the surface temperature reduction of the flat roof due to green roof, and confirmed the influence of the green roof based on it, and assessed the possibility of saving structures' energy and reducing $CO_2$ emission of structures. For the actual measurement, the differences of the average atmospheric temperature of the green roof and non-green roof flat roof were $8.67^{\circ}C$ and $0.787^{\circ}C$, and the average floor temperature gaps were $11^{\circ}C$ and $2.008^{\circ}C$ in October and November respectively. It was expected that if it's measured on around summer solstice that the temperature gets higher, the deviation of the surface temperature should be bigger, and it was confirmed that the green roof eventually raises insulating effect of structures and will influence on cooling and heating effects such as energy saving and insulating.

• The monthly packaging world
• /
• s.273
• /
• pp.101-109
• /
• 2016

굿디자인(GOOD DESINE)이란 산업통상자원부가 주최하고 한국디자인진흥원의 주관 아래, 산업디자인진흥법에 의거하여 상품의 외관, 기능, 재료, 경제성 등을 종합적으로 심사하여 디자인의 우수성이 인정된 상품에 GOOD DESINE 마크를 부여하는 제도로 1985년부터 매년 시행해 오고 있다. GD마크 선정제란 우수한 디자인 상품개발을 장려하여 국가 경쟁력을 확보하고 국민 삶의 질 향상에 기여하는 것을 목표로 하고 있으며, 나아가 유니버설디자인, 서비스디자인, 전통시장, 산업단지 디자인을 고도화(우수디자인 선정, 장려 등)함으로써 사회적 문제해결과 지속가능한 창조경제를 실현하는데 그 의의가 있다. 선정 대상 품목으로는 제품디자인, 환경디자인, 소재표면처리디자인, 패션디자인, 포장디자인, 커뮤니케이션디자인, 건축디자인 패션디자인으로 대통령상 1점을 비롯해 국무총리상, 대상, 최우수상 등을 시상하고 있다. 굿디자인 상품은 향후 조달청이 시행하는 우수제품선정 및 물품구매 적격심사 시 우대되며, 중소기업청이 시행하는 수출유망중소기업지정 및 수출기업화 사업평가시 우대받을 수 있다. 마크사용에 있어 호주 디자인상(AIDA)과의 상호인증으로 마크 부착이 가능하다. 본 고에서는 2015년 우수디자인(GD)으로 선정된 제품 가운데 생활 포장 및 산업포장 부문 수상작들과 일부 선정된 제품들을 살펴본다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.385-388
• /
• 2009

건축물의 적재가연물 특성은 성능위주 화재안전설계를 수행함에 있어 중요한 인자이다. 본 연구에서는 서점의 성능위주 화재안전설계에 이용할 목적으로 적재가연물을 대상으로 연소발열성상을 측정하기 위한 화재실험을 행하였다. 실험에서는 서적과 서가의 일부분을 재현한 시험체를 내화로에 넣고 ISO834 표준가열곡선에 따라 가열하여 화재 최성기에서의 연소성상을 파악하였다. 그 결과, 서적은 외부 가열을 받으면 표면연소 후에 탄화하여 주위에 고온이 형성되어도 열분해가스의 방출량이 증가하지 않는 것으로 파악되었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.105-112
• /
• 2018

This paper proposes a method for fabricating heatable glass using the conduction characteristics of metal thin films deposited on the surface of Low-e(Low emissivity) glass. The heating value of Low-e glass depends on the Joule heat caused by Low-e glass sheet resistance. Hence, its prediction and design are possible by measuring the sheet resistance of the material. In this study, silver electrodes were placed at 50 mm intervals on a soft Low-e glass sample with a low emissivity layer of 11 nm. This study measured the sheet resistance using a 4-point probe, predicted the power consumption and heating value of the Low-e glass, and confirmed the heating performance through fabrication and experience. There are two conventional methods for manufacturing heatable glass. One is a method of inserting nichrome heating wire into normal glass, and the other is a method of depositing a conductive transparent thin film on normal glass. The method of inserting nichrome heating wire is excellent in terms of the heating performance, but it damages the transparency of the glass. The method for depositing a conductive transparent thin film is good in terms of transparency, but its practicality is low because of its complicated process. This paper proposes a method for manufacturing heatable glass with the desired heating performance using Low-e glass, which is used mainly to improve the insulation performance of a building. That is by emitting a laser beam to the conductive metal film coated on the entire surface of the Low-e glass. The proposed method is superior in terms of transparency to the conventional method of inserting nichrome heating wire, and the manufacturing process is simpler than the method of depositing a conductive transparent thin film. In addition, the heat characteristics were compared according to the patterning of the surface thin film of the Low-e glass by an emitting laser and the laser output conditions suitable for Low-e glass.

• Archives of design research
• /
• v.14 no.2
• /
• pp.197-207
• /
• 2001

A designed object reveals its meaning and image through form, color and material. Among these three elements, material has more powerful influence with its tactile and visual characteristics. In Korea, traditionally materials itself were mainly used to design artifacts rather than various color or formal decoration. The purpose of this study is to investigate the Korean traditional materials, and to classify them by the characteristics of their texture. For this study, the pictures of Korean traditional artifacts were collected from the national museums and literature. Those are architectural and interior elements, furniture, cloths and textiles, arts and crafts. Total of 533 collected artifacts were classified into seven categories, metal, day, stone, paper, wood, straw, fabric things. : 59 metal things, 115 clay things, 62 stone things, 73 paper things, 80 wood things, 47 straw things, 97 fabric things. Each materials were classified into its forming methods and surface treatment focused on the he characteristics of their surface texture. Throughout this study, the uniqueness of forming method and surface treatment of each materials in Korea has been clarified. And furthermore the classification by this various traditional methods of materials will provide plentiful information and ideas to today's designers of the world.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.4
• /
• pp.308-313
• /
• 2014

Recently, for longevity of resident building, the main trend is that the change of the inside space organization of resident building from wall construction to rhamen construction, which resulted in increase in use of lightweight composite panel. Thus, in this study, authors analyzed the engineering property of oxide of magnesium depending on the magnesium chloride addition ratio. The results of this research is expected to contribute on providing a fundamental material for the surface materials of lightweight composite panel. As the result of the experiment, as fluidity increased, air content decreased and initial set and final set as the magnesium chloride addition ratio increase. In the aspect of flexural strength and compressive strength, the test specimen showed the highest strength at 40% of the magnesium chloride addition ratio. At 20% of the magnesium chloride addition ratio, the test specimen showed the lowest water absorption rate. As the magnesium chloride addition ratio increases, the expansibility tends to increase as well in the aspect of shrinkage strain. After observing microstructure, we can see hydration products in the form of needle. It appeared high flexural strength because the hydration products have mineral fibrous tissue shape, which also contribute to the cause of the expansibility.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.61-69
• /
• 2007

The building materials used for improving indoor air quality, the wood charcoal mixed with cement mortar or natural water paint were examined for their potential removing ability of formaldehyde. After the reaction of samples with formaldehyde in the glass flasks designed in our lab, the remaining formaldehyde was collected using DNPH (2,4-dinitrophenyl hydrazine) cartridges, and their concentration was determined using HPLC. From the results, it was found that the removing amount of formaldehyde per one gram sample containing 5, 10, or 15% of wood charcoal was more than three times compared to that of control (100% cement mortar or water paint). Their elimination percentages from the initial formaldehyde was about 80~90%. The experimental results for wood charcoal-water paint showed a similar trend with those of wood charcoal-cement mortar samples. Their elimination percentages from the initial formaldehyde was about 90%. It is proposed that formaldehyde is adsorbed on the adsorbed 'O' or 'OH' groups in the graphene layers formed through the re-arrangement of lignocellulose in the wood during the carbonization procedure.