• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.163-164
• /
• 2020

When measuring fine dust at a large-scale site such as complex construction, the change in the value of fine dust measurement is large due to the influence of the time, location, wind speed, wind direction, and humidity. This study aims to find out the results of measuring fine dust in an actual construction site and inferring the changes.

• Electric Engineers Magazine
• /
• v.238 no.6
• /
• pp.22-25
• /
• 2002

건물은 인류의 역사가 시작되면서 초기에는 움막의 형태에서부터 시작하여 스스로의 생활을 유지하고 자연으로부터 생명의 위험을 보호하기 위한 수단으로서 구축되었다. 원시 농경사회 정착생활이 시작되면서 점차 생활의 규모가 커지고 건물을 건축하는데 문화와 예술적인 요소들이 반영되었으며 기술의 발달과 더불어 건물은 끊임없는 변화가 시도되어왔다.

• Journal of Energy Engineering
• /
• v.21 no.3
• /
• pp.272-279
• /
• 2012

The emission quota of 26.9% was allocated to the architectural sector according to the greenhouse gas(GHG) emission reduction goal of the government. It has become inevitable to change the architectural structures in a low-energy consumption and sustainable manner for new and existing house. The introduction of various legal systems and deregulation have been attempted to promote the low carbon emission and sustainable energy conversion. Although overall emission reduction goal has been set for 6.7 million units of existing houses, there has been a lack of standards and directions for the emission reduction measures. This study was intended to present the most economic and effective green technology improvement measures based on the investigation into the current conditions through direct visit to the selected architectural structures and the repeated simulation of relevant technical elements.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.227-232
• /
• 2011

최근 피난제약이 많은 대형 및 고층건축물의 증가함에 따라 화재 시 많은 인적피해가 예상된다. 이에 국내외에서는 화재로부터 인명을 보호하기 위한 방법으로 건축물의 성능 위주 피난 안전성평가를 실시하고 있는데 이를 위해서는 해당 건축물을 이용하는 사용자의 특성을 파악할 필요가 있다. 특히 건축물의 피난용량을 결정하는 재실자 밀도는 중요한 평가요소로 국외의 경우에는 건축물 용도에 따른 단위면적 당 재실 인원 즉, 재실자 밀도를 산정하여 규정하고 있으나 현재 우리나라는 건축법에서 건축물의 용도 및 규모만을 고려한 사양적 기준을 적용하고 있어 재실자를 고려한 피난설계가 제대로 이루어지지 않고 있다. 이에 본 연구는 재실자 밀도 고려한 성능위주 피난용량 확보기술을 위하여 우선적으로 초고층 건축물을 선정하여 재실자 밀도 실태조사를 하였다. 이를 토대로 국내 초고층 건축물의 재실자 밀도 산정 시 기초자료로 이용하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.3043-3051
• /
• 2013

As abnormal climate phenomena frequently happen due to the after-effect of the global warming, all nations suggest climate change response policies in many different fields to prevent global warming by reducing greenhouse gas. Especially, these days, the realization that the greenhouse gas from city buildings should be decreased is growing, and it is because that buildings are accounted for a quarter of national greenhouse gas emission and it is more than half the percentage of emissions within the city. Accordingly, Korean government sees the need to take an initiating role to fulfill low-carbon green policies and promotion strategies in the public sector, and wants to facilitate greenhouse gas reduction in the private sector as well. In this background, this study tries to examine the low-carbon planning element in public buildings and figure out the amount of carbon reduction and economic analysis centering Cheongju city as case study. Lastly, we propose some suggestion for low-carbon and greening of public buildings.

• The Journal of the Korea Contents Association
• /
• v.19 no.7
• /
• pp.291-303
• /
• 2019

For cities with ancient buildings at core areas, night lighting is an effective means to demonstrate their history and culture. In this regard, night scenes of these ancient buildings are evaluated from multiple aspects, such as color rendition, brightness ratio affected by ambient light and technological realization of lighting facilities. This study builds a visual evaluation system for night scenes of ancient buildings based on three dimensions, namely ancient architecture carrier performance, visual perception and technological realization, and explains specific evaluation sub-criteria one by one. In addition, this study adopts Analytic Hierarchy Process (AHP) to analyze the impact of each sub-criteria item on the weight of the whole evaluation system, and conducts a consistency test to show that the evaluation system meets the reasonable requirements of hierarchy setting. Moreover, relative importance of each sub-criteria item may be determined based on their corresponding weights.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.33 no.12
• /
• pp.29-36
• /
• 2017

A recent global trend in the increase of earthquake-related disasters has become so frequent as to cause various damages to a wide range of mid- to high-rise buildings. Particularly, more attention is being paid to the effect of horizontal load in high-rise buildings not only on the key structural elements of the structures, but also on the possibility of the secondary damages to them due to the failure of exterior panels, which are non-structural elements, but such damages are difficult to cope with as they may be caused by unexpected changes. The present study examined exterior panels using moving clips to prevent such secondary damages on the non-structural elements and analyzed the structural performance of these exterior panels through the finite element analysis and the shaking table test. The analysis results showed that the exterior panels using moving clips satisfied the structural performance against the allowable story drift of KBC2009 and the safety of the exterior panels was verified by the shake table test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.310-318
• /
• 2016

This study examined the correlation between microscopic factors and pedestrian volume in an urban environment, focusing on the microscopic factors that stimulate the pedestrian volume, such as density, diversity, network structure, accessibility, and the form of lots and buildings. In particular, factors already known to boost the pedestrian volume include density, diversity and accessibility, which are three variables strongly related to the concept of the 3Ds (Density, Diversity, Design) proposed by Cervero and Kockelman (1997) and the additional 2Ds (Distance to Transit, Destination Accessibility) suggested by Ewing et al. (2008). The analysis in this study was based on the 2010 survey of the floating population in Seoul, particularly on the data from Jongro-gu and Jung-gu in Gangbuk area. Data were established by analyzing the microscopic factors within a 500m radius around each of the 1,028 spots from which the pedestrian volume in Jongro-gu and Jung-gu was measured. The analysis showed that density, diversity and accessibility, three factors that were already known to be effective in increasing pedestrian volume, also have the same effect in Jongro-gu and Jung-gu.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.15-16
• /
• 2011

Construction automation and robotics are being taken notice as an alternative to improve productivity and quality. Reflecting on these purpose, automation system, called RCA(Robotic-crane based Construction Automation) system, is developed and have been verified through a pilot project recently in Korea. To apply the RCA system in high-rise building effectively, each management factors of element technologies in the system is derived and assessed critical factor. The purpose of this study, management factors of element techniques, consisted of RCA system, is classified through questionnaires/interviews targeting system developers and construction managers in pilot project site, and critical factors is selected using AHP.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.140-141
• /
• 2016

Dynamic nature and diverse requirements on construction sites make the automation technology harder to be employed actively. In this study, we analyzed optimal type of automation system and importance of core technologies for developing efficient construction automation system on 11 construction operations. As a result, it showed that man-machine cooperation system may be the most suitable for most operations, while autonomous robot will be best suited in hard working environment such as maintenance of exterior wall. In elemental technology, ease and accuracy of control and operation showed higher priority than others regardless of automation system type. These findings will provide useful information for developing the construction automation system.