• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.81-89
• /
• 2021

In recent years, the design of buildings is changing from formal to creative and freeform. Accordingly, the scale of construction technology is changing to architectural design and construction of irregular buildings. Using the FDM method, which is one of the 3D printing technologies, it is possible to manufacture various forms of irregular formwork inexpensively and quickly coMPared to the existing formwork, and it seems to be able to solve the manpower problem. Using a 3D printer, the PLA filament formwork is produced in the form of a cylinder and a rectangular cuboid, and the usability of the PLA filament formwork is confirmed by examining the compression strength test and the degree of deformation and reusability over 28 days of age. Different sizes of additional specimens are also conducted according to the size. As a result of the experiment, it was confirmed that the filament formwork itself has about 3~4MPa strength. As a result of reviewing data through existing linear studies and experiments, it is appropriate to use more than 60% infill, and it is advantageous in terms of strength. As a result of cutting and dismantling the filament formwork, the surface is very clean and there is no damage, so it can be reused.

• Journal of Energy Engineering
• /
• v.12 no.3
• /
• pp.241-252
• /
• 2003

As more and more residential complexes will be developed in the future, this paper tries to establish the definitions and standards for the estimation of power demands in these areas and propose standards for the estimation of power demands for power companies and construction companies to settle the debates surrounding this issue. Through a survey and analysis of existing areas, new standards that will enable more accurate estimation of power demands in new cities complexes to be developed in the future are established by calculating the average load density, load factor, utilization factor by area, use and building size after dividing the facilities into building type. Also, for general hospitals, sports facilities and government buildings of the non residential building category, metropolitan areas, where these facilities are concentrated, are surveyed and analyzed.

• Fire Science and Engineering
• /
• v.17 no.2
• /
• pp.10-16
• /
• 2003

The main purpose of this study is to raise the point at issue and to propose reform direction about the current performance criteria of fire resistance through the examination of the fire resistance required for each use of compartment by using performance-based fire safety design method. To examine the performance criteria of fire resistance, this study compared the equivalent time of fire exposure which was calculated by using time-equivalent formulae with the required fire resistance time determined by existing prescriptive code, and surveyed factors such as the fire load energy density, ventilation factor, fire compartment materials and fire compartment geometry in order to calculate the equivalent time of fire exposure.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.9 no.3
• /
• pp.5-13
• /
• 2009

This study examined public building remodeling projects in France. Through investigating cases of ancient buildings remodeled in France, the study aimed to provide fundamental data and analysis for remodeling public buildings. Accordingly, seven cases were analyzed in terms of remodeling methods, architectural characteristics, methods of conservation, and restoration of ancient historical buildings, as well as a change of usage of an existing building. As a result, this study found the criteria of French ancient building remodeling. The remodeling methods of an existing building vary in their goals and strategies depending on how the old architectural elements are persevered, as well as how new elements are added to form their unique characteristics. Thus, the remodeling methods are classified into four types based on causes: restoration, extension, renovation and rebuilding. Such methods are used jointly rather than individually. The ancient building remodeling is the process of recreating new functions and new artistic values to preserve the cultural and artistic values of existing historic buildings.

• Fire Science and Engineering
• /
• v.25 no.5
• /
• pp.47-53
• /
• 2011

Fire load in buildings greatly contribute to the time and scale of fire according to the type and quantity of the fire load. Because bookstores have a large quantity of fire load compared with other buildings which may lead to large scale fires, however, their heat release characteristics have been hardly investigated. In this study, to obtain the data applicable for the performance-based fire safety design of bookstores, the specimens representing stacked fire loads were heated in a furnace in compliance with the standard heating curve of ISO834-1:1999 to investigate their heat release characteristics. From the experiment result, the combustion velocity and heat release rate required for performancebased fire safety designs are obtained.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.8-13
• /
• 2011

The fire compartments which are composed of fire walls and fire doors for buildings are compulsorily required to minimize the fire damage in Korea. The performance standards of fire doors for compartments are regulated by the notification of the ministry of land, transport and maritime affairs and are mainly about the Integrity of the doors not insulation. In this study, we measured the radiant heat of six different kinds of fire doors in fire and analyzed the results and presented the reasons of the need to consider adding the radiant heat standard for fire doors to the notification.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.3
• /
• pp.89-94
• /
• 2009

The stack effect in high-rise buildings is expected more significant at nights in winter due to the large temperature difference between the inside and outside of the buildings. However, the existence of large openings such as natural ventilators on the floor may effect the position of neutral plane, smoke spread at fire and thus obstruct the door openings for rescue. In this paper, the vertical and horizontal pressure distribution with different openings of natural smoke ventilators was experimentally analyzed by investigating pressure differentials.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2005.11a
• /
• pp.57-61
• /
• 2005

The objectives of this study are to illustrate an alternative housing type responding to the social requirements and customers' needs, to suggest the improvement plan for the related laws and regulations through survey of the actual condition for housing buildings such multi have been raised in classification due to that the existing law systems including the current use classification of residential buildings have been defined unclearly. Especially, various social problems have yielded in line with emergence of the housing type which is not legally classified as residential however used for the living purpose practically. Current zoning planning and related law system have rigidity. So, It is required to introduce a flexible classification system which protects the residential environment based on the housing purpose, function and habitability and provides correspondence between residence and ownership/management method. The legal classification system should be revised in a way that the housing use classification corresponds with the zoning system through breakdown of the use classification system

• Proceedings of the KIEE Conference
• /
• 2006.07e
• /
• pp.15-16
• /
• 2006

배전선로에 전력을 공급하는 방식은 일반적으로 22.9kV급 XLPE 케이블에 의한 전력공급이 주를 이루어 왔다. 한편으로 대규모 전력을 소비하는 공장 및 고층 빌딩의 전력 공급에 있어서는 일반적으로 각각 부하로의 많은 회선수의 케이블 포설을 요하는 전력케이블 보다는, 한 선로로 보다 많은 대전류를 수송하면서 부하 가까이에서 필요한 전류를 간편하게 분기해 공급받는 부스덕트 시스템이 시공 및 배전선로 관리의 간편성에 의해 점차 용도가 늘어나고 있다. 부스닥트 시스템의 대부분은 일단 시설물이 건축될 때 건축물의 상부 공간 또는 설비가 위치한 하부 바닥 구간을 통해 설치된 이후, 기타 배관, 가스관 등의 추가적인 건축 구조물과 함께 설치되어 이후 선로의 보수 진단 등이 대부분 어렵게 되어진다. 본 논문에서 소개하는 부스덕트의 온도감시 시스템은 아무리 복잡하고 협소한 설치 환경이라도 특수한 포설 공법에 의해 광화이버를 포설하고, 이를 활용하여 실시간으로 부스덕트 선로의 표면온도와 주변온도를 상시 감시함으로써, 효율적인 부스덕트 선로의 활용뿐만 아니라 과열에 의한 절연사고를 미연 방지하는 운전신뢰성과 안정성을 높이는 것이 가능하게 되었다.

• Fire Science and Engineering
• /
• v.25 no.2
• /
• pp.88-94
• /
• 2011

Heat release characteristics of live fire load are an important parameter for performance oriented fire safety design of a building. While investigations have been carried out on the fire load and its burning behavior in office, residential and commercial buildings and so on, little effort has been paid for the rational treatment of fire load in bookstore. In this report, burning behavior of typical combustible objects in bookstore are studied by measuring heat release rates of bookshelf with book. Based on the results, it has reviewed fire safety when a fire accident occurs on the large bookstore and suggested peak heat release rate per burning surface, fire growth rate, etc of the live fire load required for fire safety design in bookstore.