• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.10a
• /
• pp.271-274
• /
• 2010

방염대상물품의 방염성능을 평가함에 있어서 건축물의 내장재로 활용되어지는 목재의 경우 방염액 또는 방염필름 등을 활용한 직접적인 방염처리방법을 많이 활용하고 있는데 방염성능을 평가하는 기준으로는 잔염시간, 잔신시간, 탄화길이, 탄화면적 등의 수치가 기준을 만족하여야 하는데 목재를 활용한 합판에 적용되어지는 방염처리방법에 따라 성능기준의 모호성이 나타날 수 있기 때문에 방염성능의 적합여부를 판단하기 어려운 점이 있어 이에 대해 실험적으로 고찰한 결과를 살펴보았다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.391-391
• /
• 2021

최근에는 도시에는 불투수 면적의 증가로 지면 침투량이 줄어들고 유출량이 증가되고 있다. 또한 지면에서의 먼지 등 비점오염원의 유출로 인한 수질악화도 진행되는 경우가 많다. 그러므로 도시의 개발에 따른 악영향을 최소화하기 위해 다양한 저영향개발기법(Low Impact Development)을 도입하여 도시 물순환 건전성을 확보하기 위해 노력하고 있다. 본 연구에서는 도시 유역에서의 유출량 분석을 위해 저영향개발기법 중 투수성포장과 옥상녹화 등을 적용하여 침투량의 증가와 유출량 감소 결과를 분석하였다. 투수성포장과 옥상녹화의 영향이 크지는 않지만, 도시에서의 유출량 저감에 영향을 미칠 수 있는 것으로 분석되었으며, 향후 지속적인 도시 물순환 건 전성 확보연구의 기초 자료로 활용될 수 있을 것으로 보인다. 그 결과는 도시 개발 계획의 우선순위를 결정하는데 사용될 수 있어서, 도시 공간의 삶의 질이 향상될 것이다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.281-282
• /
• 2022

본 연구는 국토의 계획 및 이용에 관한 법률에 규정된 방재지구에 대하여 관련 연구 자료 및 통계를 통한 지구지정 현황과 운영제도의 문제를 검토한다. 건축물·인구밀도가 밀집된 지역으로서 시설 개선 등을 통하여 도시지역 내의 재해예방을 위해 지정이 필요한 시가지방재지구는 방재지구지정 의무화제도가 도입된 이후 서울시 등 여러 곳에서 지정되었으나 대부분 폐지되었고, 현재는 전국에서 전라남도에 5개 지구가 지정되어 있다. 지구지정 감소의 원인은 방재지구의 지정 및 관리제도가 현실적이지 못한데 기인한다. 시가지방재지구는 면적에 비해 인구가 밀집된 도시지역의 재해에 효율적으로 대응할 수 있는 방재계획이며, 활성화를 위하여 지원방안 및 인센티브가 포함된 구체적인 관리 운영 기준 마련이 필요하다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.439-440
• /
• 2022

우리나라 건기에 해당하는 봄철에는 산불화재에 예방에 주의해야 한다. 그러나 안타깝게도 이 시기에는 다양한 언론매체를 통하여 산불화재 피해에 대한 소식을 전해 들어야만 하는 것이 사실이다. 2022년 울진군에서 발생한 산불화재는 국내에서 2000년 동해안 산불에 이어 역대 2번째로 피해 규모가 큰 산불화재이다. 산불화재은 건축화재와 달리 피해면적에 광범위하기에 더욱 주의를 기울여야만 하며, 언론매체를 통한 피해 규모를 살펴보면 산불의 위험성을 증대하는 것처럼 느껴진다. 본 연구에서는 국가화재통계를 이용하여 국내에서 발생하는 산불화재의 발생빈도와 발화장소에 대하여 살펴보았다. 이를 통하여 대규모 산불화재로 인한 피해를 예방하기 위한 방안으로서 화재안전대책 우선순위를 도출하고자 하였다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.15 no.1
• /
• pp.11-18
• /
• 2003

The concrete is usually used to build a radiation therapy facility and the enough concrete thickness for high energy x-ray beam is about 1 meter. But if the space is not enough to build a radiation therapy facility with concrete, the substitute for concrete is needed, and the Ledite can be a good substitute for concrete. In this study, we compared the Ledite with the concrete. The comparing list are the needed shielding thickness, the period of construction and the cost.

• Journal of Digital Convergence
• /
• v.19 no.9
• /
• pp.189-199
• /
• 2021

In order to increase the self-reliance rate of new and renewable energy in order to respond to the mandatory domestic zero-energy buildings, the taller the building, the more limited the site area, and installing PV modules on the roof is not enough. Therefore, BIPV (Building integrated photovoltaic, hereinafter BIPV) is the industry receiving the most attention as a core energy source that can realize zero-energy buildings. Therefore, this study conducted a survey on the problems of the BIPV industry in a self-discussing method for experts with more than 10 years of experience of designers, builders, product manufacturers, and maintainers in order to suggest the right direction and revitalize the BIPV industry. Industrial problems of BIPV adjustment are drawn extention range of standard and certification for products, range improvement for current small condition of various kind productions, need to revise standards for capable of accomodating roof-type, color-module and louver-module, necessary of barrier in flow of foreign modules into korea through domestic certification mandatory, difficulty in obtaining BIPV information, request to prevent confusion among participants by exact guidelime about architectural application part of BIPV, and lack of the BIPV definition clearness, support policy, etc. Based on the improvements needed for the elements, giving change and competitiveness impacts aims to present and propose counter measures and direction.

• Land and Housing Review
• /
• v.12 no.4
• /
• pp.93-101
• /
• 2021

As the number of small households (1 to 2 persons per household) in Korea gradually increases, so does the importance of housing supply policies for small households. In response to the increase in small households, the government has been continuously supplying urban housing for these households. Since housing for small households is a sales and rental business similar to apartments and general business facilities, it is important for the building owner to calculate the project's estimated construction duration during the planning stage. Review of literature found a model for estimating the duration of construction of large-scale buildings but not for small-scale buildings such as urban housing for small households. Therefore this study aimed to develop and verify a model for estimating construction duration for urban housing at the planning stage based on multiple regression analysis. Independent variables inputted into the estimation model were building site area, building gross floor area, number of below ground floors, number of above ground floors, number of buildings, and location. The modified coefficient of determination (R_a²) of the model was 0.547. The developed model resulted in a Root Mean Square Error (RMSE) of 171.26 days and a Mean Absolute Percentage Error (MAPE) of 26.53%. The developed estimation model is expected to provide reliable construction duration calculations for small-scale urban residential buildings during the planning stage of a project.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.1
• /
• pp.9-18
• /
• 2019

Concrete, which is the most widely used building material in modern times, has been improved not only in strength but also in structural performance such as increase in toughness and ductility, weight reduction, and improvement in quality of human life. Due to the surge in demand for the building, there is a tendency to be used variously from architectural panel and architecture to interior accessories. In Korea, a light-transmitting concrete, LEFC(Light Emotion Friendly Concrete), that insert plastic rods to stimulate emotional sensation through the combination of light and concrete has developed. In previous research, it was confirmed that the use of a synthetic foam agent rather than an animal foam agent did not cause a fogging phenomenon. In this study, lightweight by applying foaming agent to LEFC and two types of fiber (Nylon Fiber, Polyvinyl Alcohol) were compared to achieve to investigate the fiber to be applied in future. An equation that can predict the loss and adhesion reduction of the concrete section according to the diameter of the rod (5mm, 10mm) and the interval (10mm, 15mm, 20mm) was proposed.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.1
• /
• pp.3-14
• /
• 2018

An apartment complex is a building use with great potential to contribute to solving problems related to urban ecological environment and climate change. The first goal of this study is to grasp the current situation of application and limitations of the ecological area rate, which is a representative evaluation index used to evaluate the environmental performance of the external space of an apartment complex in Green Standard for Energy and Environmental Design (G-SEED). The second goal is to propose a prototype of the evaluation index for evaluating greenhouse gas (GHG) reduction performance in order to supplement the evaluation index for the environmental performance of the external space in terms of response to climate change. We analyzed 43 cases of apartment complexes certified according to G-SEED, which was enforced since July 1, 2010, and found application characteristics of each space type and the limitations of ecological area rate. We analyzed overseas green building certification systems such as LEED and BREEAM that derived implications for supplementing the limitations of ecological area rate, which is focused on the evaluation of soil and water circulation function, and set up a development direction of complementary measures. Through analysis of previous studies, relevant regulations and standards, and technical documents of the manufacturer, the heat island mitigation performance of the pavement and roof surfaces of the apartment complex and the carbon uptake performance of the trees in the apartment complex was selected as parameters to yield the GHG reduction performance of the external space of the apartment complex. Finally, a quantitative evaluation method for each parameter and a prototype of the evaluation index for the GHG reduction performance were proposed. As a result of applying the prototype to an apartment complex case, the possibility of adoption and applicability as an evaluation index of G-SEED were proved.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.5
• /
• pp.387-401
• /
• 2023

The Earth Pressure Balanced (EPB) Shield Tunnel Boring Machine (TBM) is widely employed for constructing urban underground spaces due to its minimal vibration and low noise levels. The injection of additives offers several advantages, including maintaining shield chamber pressure, reducing shear strength, minimizing cutter wear, and decreasing the permeability of the excavated soil. This technique is known as soil conditioning and involves the application of additives such as foam, polymer, and bentonite slurry. In this study, weathered granite soil commonly encountered at domestic tunnel sites was used as a soil specimen. Foam and polymer were applied as additives to assess the rheological properties of conditioned soils. The workability was evaluated through slump tests, while the rheological properties were assessed through laboratory pressurized vane shear tests conducted under the same conditions. Specially, the polymer was applied under specific conditions with low workability with high slump values, with the aim of evaluating the impact of polymer application. The test results revealed that with an increase in the Foam Injection Ratio (FIR), the slump value also increased, while the torque, peak strength, yield stress, apparent viscosity, and thixotropic area decreased. Conversely, an increase in the Polymer Injection Ratio (PIR) led to results opposite to those of FIR. Additionally, a correlation between the slump value and yield stress was proposed. When comparing conditions with only foam applied to those with both foam and polymer applied, even with similar slump values, the yield stress was found to be lower in the latter conditions.