• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.194-194
• /
• 2020

본 연구에서는 수평반사도를 이용한 강우추정 관계식을 유효성 측면에서 재평가하였다. 이를 위해, 강우추정 관계식의 유도과정을 다시 살펴보고, 관측자료를 가지고 강우입자분포의 매개변수를 추정할 수 있도록 식의 형태를 변환하였다. 이 식을 이용하여 비슬산 레이더에서 관측된 반사도-강우강도의 쌍 자료에 대한 강우입자분포 매개변수를 추정하였다. 마지막으로 추정된 매개변수 대푯값을 다시 강우추정 관계식 유도에 사용하였다. 이렇게 결정된 강우추정 관계식이 관측된 수평반사도-강우강도 자료를 얼마나 잘 대표하는지를 평가하였으며, 그 결과, 레이더 반사도가 작아지면 작아질수록 강우추정 관계식의 이론적 배경과 관측자료의 괴리가 커지는 것으로 나타났다. 또한 강우입자분포를 지수분포로 가정한 형태의 강우추정 관계식이 모든 반사도 구간에서 유의하지 않을 수 있다는 것을 확인하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.332-332
• /
• 2020

본 연구에서는 유역 출구에서의 첨두유속과 Clark 모형 매개변수 간의 관계를 검토하였다. 첨두유속과 집중시간의 관계가 먼저 검토되었으며, 이후 집중시간과 저류상수의 관계가 검토되었다. 이를 위해, 다년간의 수위 관측 및 유속 및 유량 측정 성과가 있는 지점들이 선정되었다. 분석을 위해 관측 수위 및 수위-유량 곡선이 존재하는 호우사상들이 고려되었으며, 이 중 첨두유속 자료가 존재하는 사상들이 첨두유속과 집중시간 관계 검토를 위해 고려되었다. 본 연구의 결과를 요약하면 다음과 같다. (1) 호우사상 규모가 커짐에 따라 첨두유속은 크게, 집중시간은 작게 나타나며, 이 둘은 선형적인 관계를 가진다. (2) 집중시간과 저류상수는 호우사상 규모에 관계없이 유역별로 어느 정도 일정하게 나타나며, 이는 유역의 상사성과 높은 상관을 가진다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.172-173
• /
• 2019

As the damage to fine dust increased, the Republic of Korea designated fine dust as a social disaster. The composition of the fine dust is composed of carbon, sulfate, nitrate, ammonium and minerals. The cause of fine dust is naturally generated by dirt, pollen, etc. In addition, there are artificial causes such as gaseous vehicle exhaust gas emitted from the use of fossil fuel. When fine dust enters the human body through breathing, it causes various respiratory diseases and skin diseases. In IARC, fine dust was designated as a carcinogen group 1. In this research, we tried to adsorb fine dust by physical adsorption using powdered activate carbon. Powdered activate carbon is a powdered activated carbon activated in a carbonized state. Porous material with high specific surface area and low density. Experimental items were tested for density, water absorption, and fine dust concentration according to the PAC addition ratio. Basic experiments were carried out to fabricate the fine dust adsorption matrix.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.164-165
• /
• 2022

In order to solve problems such as acceleration of resource use and environmental pollution, experiments were conducted with the aim of producing indoor finishing materials that can adsorb fine dust and carbon dioxide using gelite and polymer, which are porous materials. Based on the previous experiment, gelite was substituted at each level in a matrix having a polymer S738P substitution rate of 12.5%, and the results are as follows. As the substitution rate of gelite increased, the amount of fine dust and carbon dioxide adsorption increased, which is believed to be due to physical adsorption due to the high porosity of gelite. However, further experiments are needed as the overall adsorption amount is not high due to the filling inside the matrix due to the polymer.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.123-124
• /
• 2021

Recently, the danger of fine dust has emerged worldwide. In general, fine dust refers to particulate matter less than 10㎛ and ultrafine dust less than 2.5㎛, and according to the announcement by HEI (Health Impact Research Institute) in 2015, the concentration of ultrafine dust in Korea is the second highest among OECD member countries. It was investigated. In this study, an experiment was conducted to analyze how the diatomaceous earth substitution rate affects the strength characteristics of the permeable block. As the replacement rate of diatomaceous earth increased, the strength decreased. The reason why the strength decreases with the use of diatomaceous earth is that the strength of the hardened body decreases as the structure of the hardened body becomes less dense as the amount of diatomaceous earth increases, and the reason that the strength decreases as the replacement rate of diatomaceous earth increases is the reason for the absorption performance of diatomaceous earth. Therefore, it is judged that a void was generated inside the hardened body while water was absorbed and then evaporated or discharged in the matrix, and accordingly, the strength decreased.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.29-30
• /
• 2020

As the modern society enters, the building becomes sealed and the public's interest in the environment increases, so the interest in indoor air pollution increases and the environmental pollution is raised as an important issue not only outdoors but also indoors. In addition, the emergence of sick house syndrome (SHS) has increased the interest in formaldehyde and is a cause of deteriorating indoor air quality. Accordingly, this study prepared a functional paint by incorporating a photocatalyst in an aqueous paint, and conducted formaldehyde adsorption experiments and functional evaluation. As a result of the experiment, as the photocatalyst was added, the formaldehyde adsorption performance tended to increase. In addition, as a result of measuring the impact resistance and alkali resistance according to the KS standard, there is no difference in residual cracks and cracks between the water-based paint without the photocatalyst and the water-based paint with the photocatalyst added. Therefore, it is considered that the water-based paint added with a photocatalyst can improve the indoor air quality by adsorbing formaldehyde and can be used as a functional paint because the functionality is not different from that of a general water-based paint.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.77-78
• /
• 2022

To improve the fire vulnerability of the organic insulation sandwich panel core, which is the main culprit of the large-scale fire disaster, an experiment was conducted to examine the thermal conductivity properties of the core material mixed with the organic insulation material EPS Bead and the inorganic insulation material glass wool. As the Additional ratio of glass wool increased, the thermal conductivity decreased, and it was determined that the replacement of glass wool of 3% or more had little effect on the decrease in thermal conductivity. In addition, it can be seen that the most ideal thermal conductivity is exhibited when 1% Replacement ratio of EPS and 3% glass wool are added. The core material of such organic and inorganic insulation materials is judged to be a core material that can compensate for the fire vulnerability of existing insulation materials. Therefore, in order to determine whether it is used as a core material for sandwich panels, additional studies such as fire resistance experiments and sound absorption experiments are needed in the future.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.83-84
• /
• 2022

Zero-energy construction is being emphasized due to environmental pollution. However, in the case of external insulation using organic insulation with good insulation performance, there are many studies on inorganic insulation as it shows limitations on fire stability. In addition, as the demand for stone for exterior walls increases, Cellular Light -weight Concrete(CLC) with polymer is used to supplement fire stability and insulation performance, and the construction of stone is complemented by combining organic insulation, inorganic insulation, and stone. In this study, the compressive strength and adhesion in tension of CLC are studied. As a result of the experiment, the compressive strength of 28 days according to the polymer addition rate did not change. The adhesion in tension according to the polymer addition rate tends to increase as the addition rate increases. The target adhesion in tension is 0.8 MPa, but the maximum value of the experiment did not reach the target value, and further research was needed to combine to maintain the density and improve the adhesion in tension.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.5
• /
• pp.71-80
• /
• 2007

Because of the characteristics relating to high tensile ductility, High Performance Fiber Reinforced Cementitious Composites (HPFRCC) are studied to be adopted in repair and retrofit of buildings. A series of three shear wall specimens was tested under constant axial stress and reversed cyclic lateral loading in order to evaluate the seismic retrofit that had been proposed for the shear wall with the opening. The retrofit involved the use of newly developed ECC and MDF(Macro Defect Free), both of which are sprayed through the high pressure pump, over the entire face of the wall. The results indicate that two difference types of retrofitting strategy make the different effects of a rise in the strength and ductility of each specimen.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.18 no.3
• /
• pp.289-297
• /
• 1989