• Journal of the Korea Institute of Building Construction
• /
• v.12 no.4
• /
• pp.442-450
• /
• 2012

In this study, fire resistance and residual strength were examined after the addition of PF fiber and bonding fireproofing gypsum board to a high strength concrete-model column of 50 MPa grade. At the beginning of the experiment, all the properties of base concrete appeared to satisfy the target range. In terms of the internal temperature record, a trend of slightly high temperature was shown when the fireproofing gypsum board was not bonding, and when the fireproofing gypsum board was bonding, as PF content increased gradually, the temperature was gradually lowered. In terms of the relationship, as time elapsed a low temperature was shown when fiber was mixed, and when the board was bonding, the trend of lower temperature could be confirmed. Meanwhile, in terms of spalling property, a severe explosive fracture was generated at PF 0%, and falling off was prevented as the fiber content was increased; however, discoloration and a multitude of cracks were discovered, and when the board was bonding, the trend in which the exterior became satisfactory when the content was increased emerged. In terms of the residual compressive strength, measuring of strength could not be performed at PF 0% without bonding of board, and the strength was increased as the fiber content was increased; however, there was a decrease in strength of about 30 ~ 40%, and in the case of PF 0% with the bonding of board, the strength could be measured; however, about an 80% decrease in strength was shown, and only about a 10 ~ 20% decline in strength was displayed, as the range of decrease was reduced as the fiber content was increased. Considering all of these factors, it was determined that a more efficient enhancement of fire resistance was obtained when two methods are applied in combination rather than when the PF fiber content and bonding of fireproofing gypsum board are utilized individually.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.1
• /
• pp.35-43
• /
• 2015

It is important to have enough design and construction duration for infrastructure projects. However, recent water resource project in Korea shows several problems caused by their fast-tract schedule. National Audit Committee report several water resource projects have quality problems caused by insufficient project duration. Especially, water resource projects such as dam and water pipeline construction should have proper time to secure their structure quality. Normal project duration for these projects should be estimated based on previous similar projects' historical data analysis. However there is no standard model which can estimate normal project duration for water resource projects in Korea. There are several normal project duration estimation models for building project developed by public(LH) and private construction companies. However, there is no proper model for water resource projects. So, this study developed normal project duration model for dam and water pipeline projects using historical data and show application of models.

• Spatial Information Research
• /
• v.18 no.4
• /
• pp.1-11
• /
• 2010

Unlike the previous studies which have focused on 2-dimensional urban characteristics, this paper presents statistical models explaining urban heat island(UHI) effect by 3-dimensional urban morphologic information and addresses its policy implications. 3~dimensional informations of Columbus, Ohio arc captured from LiDAR data and building boundary informations are extracted from a building digital map, Finally NDV[ and temperature data are calculated by manipulating band 3, band 4, and thermal hand of LandSat images. Through complicated data processing, 6 independent variables(building surface area, building volume, height to width ratio, porosity, plan surface area) are introduced in simple and multiple linear regression models. The regression models are specified by Box-Tidwell method, finding the power to which the independent variable needs to raised to be in a linearity. Porosity, NDVI, and building surface area are carefully chosen as explanatory variables in the final multiple regression model, which explaining about 57% of the variability in temperatures. On reducing UHI, various implications of the results give guidelines to policy-making in open space, roof garden, and vertical garden management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.176-187
• /
• 2018

The Korean government has been encouraging 'continuous' post-pump priming project management through relevant local personnel planning, action, and management, upon the selection of 68 sites for urban regeneration as part of the New Deal Project. This study assessed the utilization characteristics of containers, the socio-experimental temporary occupation facilities, as a tool for 'sustainable' urban regeneration. This is to identify the potential limitations of urban regeneration by the utilization of containers as public sector temporary occupation facilities and to provide adequate directions based on its efficacy. By comparing three Korean cases with the Japanese WaiWai project, in terms of 10 elements, the preoccupations with the social trend and scenery, and undifferentiated functions of the facilities focusing on the commercial or working aspects have been identified as limitations of Korean cases. Based on the analyses, the following are suggested as plausible approaches to utilize socio-experimental containers for sustainable urban regeneration: 1. Planning and management should be done by the same organization because the absence of the planning party's participation in the management likely leads to the pursuit of only profits. 2. Diversification and combinations of different utilization purposes of a single site and numerous planning of experimental container uses are in need. 3. Accommodations of heavy commercial uses lead to a decline in the continuity of follow-up projects and a change in the urban regeneration directions. Therefore, it is important to include a public socio-experimental program rather than a simple commercial or promotion program for the following urban renewal project.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.429-437
• /
• 2018

The aim of the research is to analyze a feasibility of rapid evaluation method for cement fineness by the relation analysis between density measurement using hydrometer and fineness of ordinary Portland cement. Additionally, based on the commercially available cement product, relation between a series of fundamental properties of cement mortar and fineness of cement powder was analyzed. As an experimental result, the actually measured fineness value of cement powder showed a good correlation with the fineness value obtained by hydrometer while there was poor correlation with the fineness value on specification. Especially, the density measurement in three minutes showed the closest relation with cement powder fineness, thus rapid quality evaluation of cement powder can be possible by using the regression equation obtained from the three minutes density measurement. Additionally, there was a high relation between cement powder fineness with a fundamental properties of the cement mortar such as fluidity, air content, setting time, and strength development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.480-486
• /
• 2020

The National Registered Cultural Heritage no. 377, 'The Eclectic-style House in Daeheung-dong, Daejeon', was relocated in 2013, even though it was privately owned. The relocation of National Registered Cultural Heritage through an urban redevelopment project is rare because the restriction of the preservation of a cultural asset is relatively tolerated. For the sake of profit in a redevelopment project, a privately owned Registered Cultural Heritage is likely to be demolished with no laws to prevent it. This study researched the history of the heritage and the procedure of the relocation process. Based on the research, the study intends to clarify the relationship between the economic and legislative conditions with the result of the National Registered Cultural Heritage relocation in general. The failure of the successful relocation of the National Registered Cultural Heritage in redevelopment projects is caused mainly by a change of ownership, which is generally from personal to anonymous associations. Based on the condition, this study maintained the Cultural Heritage's redefinition as a public asset and proposed phased amendments in each major procedure of a redevelopment project for the successful preservation and reuse of National Registered Cultural Heritage.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.1-12
• /
• 2007

For the purpose of effective utilization of domestic second-grown larch as structural members, post and beam construction applying traditional construction to Japanese larch glulam members was adopted with processing by machine pre-cut method. In general, horizontal shear test by KS F 2154 is conducted to assess the horizontal shear properties of the wooden structure by post and beam construction. The frame was consisted of post and beam member with appropriate fasteners, and members have their own processed parts (notch, hole, etc.) that can be well-connected each other. The shear wall was consisted of the frame with screw-nail sheathed panel (OSB). The results of horizontal shear loading tests without vertical loads conducted on the frame and the shear wall structures, the maximum strengths were about 1.9 kN/m and about 9.7 kN/m, the shear rigidities were about 167 kN/rad, 8198 kN/rad, respectively. The strength proportion of the frame specimen was about 20% of the wall's and about 2% in initial stiffness. Nail failures are remarkable on the shear wall specimen with punching shears and shear failures. The shear load factor for the shear wall specimen by the method of Architectural Institute of Japan was 1.5, which was obtained by the bi-linear method. Loading method should be considered to obtain smooth load-deformation relationship. For the better shear performance of the structures, column base and post and beam connections and sheathed panel should be further examined as well.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.251-258
• /
• 1998

The purpose of this study is to develop the District-level Planning Support System (DPSS) by using GIS. The district-level planning which is related for district-level control of city, needs the various parcel-level information which is composing the urban physical environment. The information has to be stored and analyzed for recognizing the study area, then the district-level planning will be efficiently managed. The use of GIS in the process of district-level planning is restricted for the creation of thematic map. GIS is not used for the analysis of spatial patterns and planning process. This study evaluates the characteristics of current district-level planning and the basic components of urban physical environment. And the database model is built. The topology among components is defined by using the spatial relationship. Then the spatial query machine for district-level planing is developed by using ArcView 3.1, Avenue and Dialog Extension. This spatial query machine is applied for case study. This study shows 1) the possibility of the district-level planning support system for analyzing spatial relationship, 2) the needs of the up-to-date topographic map showing current building's footlines and the complete integration with cadastral maps, it will reduce the uncertainty in the spatial decision making process, 3) the methodology for the construction of spatial decision making rules, 4) the further study for the using of raster, network, image and three dimension data.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.199-212
• /
• 2010

To establish an infrastructure for technology and information in the domestic construction industry, several construction regulations pertaining to construction information have been institutionalized. However, there are major problems with the domestic information classification system, earned value management (EVM) and project management information system (PMIS). In particular, the functions of the current PMIS have consisted of a builder-oriented system, and as EVM is not applied to PMIS, the functions of reporting, analysis and forecast for owners are lacking. Moreover, owners cannot confirm information on construction schedule and cost in real time due to the differences between the EVM and PMIS operation systems. The purpose of this study is to provide a framework that is capable of operating PMIS efficiently under an e-business environment, by providing a proposal on how to establish a work breakdown structure (WBS) and an EVM - PMIS integration model, so that PMIS may provide the function of EVM, and stakeholders may have all information in common. At the core of EVM - PMIS integration is the idea that EVM and PMIS have the same operation system, in order to be an activity-based system. The principle of the integration is data integration, in which the information field of an activity is connected with the field of a relational database table consisting of sub-modules for the schedule and cost management function of PMIS using a relational database management system. Therefore, the planned value (PV), cost value (CV), actual cost (AC), schedule variance (SV), schedule performance index (SPI), cost variance (CV) and cost performance index (CPI) of an activity are connected with the field of the relational database table for the schedule and cost sub-modules of PMIS.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.1
• /
• pp.43-51
• /
• 2020

The main purpose of protective facility for small military unit is to provide the protection of not all the weapons system but the near-miss bullet in Korean army. In particular about the small caliber bullets, especially KM80 in Korea, there were many studies that both of the experiential and structural design methods dose not reflect enough the military threat. For that reason, a new equation to calculate effective anti-piercing depths for RC slabs against small caliber bullets is proposed in earlier research with actual shooting test. But, the test only considers the strength of concrete without the thickness of concrete, types of aggregate, the angle of yaw of bullet, high-strength concrete, etc. Therefore, this study evaluated the ballistic resistance performance by thickness and proportion of magnetic aggregate of concrete. As a result, we identified two major statistical estimations that the error of piercing depth by the angle of yaw of bullet could be cancelled by barrage and the thickness and proportion of magnetic aggregate of concrete dose not effect on the protection ability of concrete structure.