• Korean Chemical Engineering Research
• /
• 제58권1호
• /
• pp.84-91
• /
• 2020

The efficiency of the synthetic magnesium silicate used in basic polyols and edible oil purification is evaluated by its purification ability and filtration rate and is affected by the particle size and surface area of magnesium silicate. In this study, it was investigated the change on the particle size of magnesium silicate was influenced by the reaction temperature, injection rate, injection order (Si, Mg) and Mg/Si reaction mole ratio. The synthesized magnesium silicate was compared and analyzed for the synthesis, grinding, and refining processes. In the synthesis process, the reaction temperature and feed rate did not affect the average particle size change of magnesium silicate, while the reaction molar ratio of Mg / Si and the order of injection acted as main factors for the change of average particle size. The average particle size of magnesium silicate increased by 8.7 ㎛ from 54.4 ㎛ to 63.1 ㎛ at Mg injection when Mg molar ratio increased from 0.125 to 0.500, and increased by about 4.8 ㎛ from 47.3 ㎛ to 52.1 ㎛ at Si injection. The average particle size according to the order of injection was 59.1 ㎛ for Mg injection and 48.4 ㎛ for Si injection and the difference was shown 10.7 ㎛, therefore the filtration rate was about 2 times faster under the condition of Mg injection. That is, as the particle size increases, the filtration time is shortened and washing filtration rate can be increased to improve the productivity of magnesium silicate. The cake form of separated magnesium silicate after filtration becomes a solid through drying process and is used as powdery adsorbent through the grinding process. As the physical strength of the dried magnesium silicate increased, the average particle size of the powder increased and it was confirmed that this strength was affected by the reaction molar ratio. As the reaction molar ratio of Mg / Si increased, the physical strength of magnesium silicate decreased and the average particle size after grinding decreased by about 40% compared to the average particle size after synthesis. This reduction of strength resulted in an improvement of the refining ability due to the decrease of the average particle size and the increase of the amount of fine particle after the pulverization, but it resulted in the decrease of the purification filtration rate. While the molar ratio of Mg/Si was increased from 0.125 to 0.5 at Mg injection, the refining ability increased about 1.3 times, but the purification filtration rate decreased about 1.5 times. Therefore, in order to improve the productivity of magnesium silicate, the reaction molar ratio of Mg / Si should be increased, but in order to increase the purification filtration rate of the polyol, the reaction molar ratio should be decreased. In the synthesis parameters of magnesium silicate, the order of injection and the reaction molar ratio of Mg / Si are important factors affecting the changes in average particle size after synthesis and the changes of particle size after grinding due to the changes of compressive strength, therefore the synthetic parameter is an important thing that determines productivity and refining capacity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제46권4호
• /
• pp.435-441
• /
• 2017

The present study was carried out to evaluate the applicability of Tenebrio molitor larvae (mealworm) as a health functional food material in order to contribute to the development of the domestic insect industry and health functional food industry. Protein hydrolysates were prepared from mealworm powder by enzymatic hydrolysis using five different proteases (alcalase, bromelain, flavourzyme, neutrase, and papain), and the hydrolysates were then tested for their antioxidant activities. Based on available amino group contents and sodium dodecyl sulphate-polyacrylamide gel electrophoresis analyses, mealworms treated with alcalase ($4,781.39{\mu}g/mL$), flavourzyme ($5,429.35{\mu}g/mL$), or neutrase ($3,155.55{\mu}g/mL$) for 24 h showed high degree of hydrolysis (HD) value, whereas HD values of bromelain ($1,800{\mu}g/mL$) and papain-treated ($1,782.61{\mu}g/mL$) mealworms were much lower. Protein hydrolysates showing high HD values were further separated into > 3 kDa and ${\leq}3kDa$ fractions by a centrifugal filter system and then lyophilized, and the production yields of the low molecular weight protein hydrolysates (${\leq}3kDa$) by alcalase, flavourzyme, and neutrase were 42.05%, 26.27%, and 30.01%, respectively. According to the RC_{50} values of the protein hydrolysates (${\leq}3kDa$) obtained from three different antioxidant analyses, all three hydrolysates showed similar antioxidant activities. Thus, alcalase hydrolysates showing the highest production yield of low molecular weight protein hydrolysates were further tested for their inhibitory effects on peroxidation of linoleic acid by measuring thiobarbituric acid values, and the results show that peroxidation of untreated linoleic acid increased dramatically during 6 days of incubation. However, pretreatment with the hydrolysates ($100{\sim}800{\mu}g/mL$) significantly inhibited linoleic acid peroxidation in a dose-dependent manner over 6 days.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제46권10호
• /
• pp.1164-1170
• /
• 2017

Protaetia brevitarsis larvae (PBL) has recently been registered as a temporary food in Korea, and this study evaluated the application potential of PBL proteins as health functional food materials. Protein hydrolysates were prepared from PBL powder by enzymatic hydrolysis using five different proteases (alcalase, bromelain, flavourzyme, neutrase, and papain), and based on the results from the peptide content and SDS-PAGE analyses, PBL treated with alcalase or flavourzyme showed a high degree of hydrolysis (HD) value, whereas the HD value of those treated with neutrase, bromelain, or papain was minimal. The protein hydrolysates showing a high HD value were separated further into the fractions of >3 kDa and <3 kDa by a centrifugal filter system and then lyophilized, and according to the $RC_{50}$ values of the protein hydrolysates (<3 kDa) obtained from three different antioxidant analyses; the alcalase hydrolysates showed the highest antioxidant activity. Therefore, the alcalase hydrolysates were tested further for their inhibitory effects on the peroxidation of linoleic acid by measuring the thiobarbituric acid values. The results showed that the peroxidation of untreated linoleic acid increased dramatically during 6 days of incubation, but a pretreatment with the hydrolysates ($100{\sim}800{\mu}g/mL$) significantly inhibited the linoleic acid peroxidation in a dose-dependent manner for 6 days. Our current studies are focused on the identification of active peptide sequences from alcalase hydrolysates.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제34권2호
• /
• pp.176-180
• /
• 2005

This study was conducted to examine effect dietary protein and calcium levels on calcium metabolism of the rat. Weaned 6-week old male rats were divided into 4 groups and were fed experimental diets for six weeks. Experimental groups were HPNC group-high protein normal calcium (protein: 400 g/kg diet, calcium: 0.5%), HPLC group-high protein low calcium (protein: 400 g/kg diet, calcium: 0.1%), NPNC group-normal protein normal calcium (protein: 200 g/diet, calcium: 0.5%), NPLC group-normal protein low calcium (protein: 200 g/diet, calcium: 0.1%). The calcium excretion in urine was higher in high protein group than in normal protein group, and it was highest in HPLC group. The activation of alkaline phophatase had a tendency to low in normal calcium group, and the concentration of parathyroid hormone (PTH) was the lowest in HPLC group. The deoxypyridinoline (DPD) concentration of urine was investigated as the highest in HPLC group and it was significantly lower in HPNC group that consumed normal calcium. The bone density of the femur was the highest in NPNC group and the lowest in NPLC group. As the results of this study, calcium excretion in urine and DPD density were the highest and the bone density was the lowest in HPLC group. It may suggest that the deficiency of calcium causes adversely effect in calcium metabolism upon consuming high protein diet. Therefore, it should be emphasized to consume enough calcium to prevent the hindrance of skeletal metabolism caused by deficiency of calcium upon consuming high protein diet.

• Economic and Environmental Geology
• /
• 제57권2호
• /
• pp.205-217
• /
• 2024

This study evaluated the physical characteristics and quality of volcanic rocks distributed in the Jeju Island-Ulleung Island area as aggregate resources. The main rocks in the Jeju Island area include conglomerate, volcanic rock, and volcanic rock. Conglomerate is composed of yellow-red or gray heterogeneous sedimentary rock, conglomerate, and encapsulated conglomerate in a state between lavas. Volcanic rocks are classified according to their chemical composition into basalt, trachybasalt, basaltic trachytic andesite, trachytic andesite, and trachyte. By stratigraphy, from bottom to top, Seogwipo Formation, trachyte andesite, trachybasalt (I), basalt (I), trachybasalt (II), basalt (II), trachybasalt (III, IV), trachyte, trachybasalt (V, VI), basalt (III), and trachybasalt (VII, VIII). The bedrock of the Ulleung Island is composed of basalt, trachyte, trachytic basalt, and trachytic andesite, and some phonolite and tuffaceous clastic volcanic sedimentary rock. Aggregate quality evaluation factors of these rocks included soundness, resistance to abrasion, absorption rate, absolute dry density and alkali aggregate reactivity. Most volcanic rock quality results in the study area were found to satisfy aggregate quality standards, and differences in physical properties and quality were observed depending on the area. Resistance to abrasion and absolute dry density have similar distribution ranges, but Ulleung Island showed better soundness and Jeju Island showed better absorption rate. Overall, Jeju Island showed better quality as aggregate. In addition, the alkaline aggregate reactivity test results showed that harmless aggregates existed in both area, but Ulleungdo volcanic rock was found to be more advantageous than Jeju Island volcanic rock. Aggregate quality testing is typically performed simply for each gravel, but even similar rocks can vary depending on their geological origin and mineral composition. Therefore, when evaluating and analyzing aggregate resources, it will be possible to use them more efficiently if the petrological-mineralological research is performed together.

• Journal of Nutrition and Health
• /
• 제39권5호
• /
• pp.433-443
• /
• 2006

The effects of Allium vegetables on blood glucose levels and lipid metabolism in streptozotocin (S12) induced diabetic rats were investigated. Diabetes mellitus was induced by S1'2 injection (45 mg/kg 5.w.) into the tail vein. Sprague-Dawley rats weighing $220\;{\pm}\;10\;g$ were randomly assigned to 7 groups: normal, S1'2-control and five Allium groups (Allium cepa, Allium fistulosum, Allium sativum, Allium tuberosum and Allium victorialisL Normal and S12control groups were fed an AIN-93 diet and five Allium groups were fed a modified diet containing. 10% Allium powder each for 4 weeks. Body weight, diet intake, food efficiency ratio (FER) and organ weights- were monitored. Activities of aspartate aminotransferase (AST) & alanine aminotransferase (ALT) were observed: Plasma lev~ls of glucose, free fatty acid, triglyceride and HDL-cholesterol were analyzed. Levels of glycogen, cholesterol and triglyceride in liver were determined. Levels of malondialdehyde (MDA) in liver, lung, kidney, and pancreas were assayed. The hepatic contents of chromium (Cr) , iron (Fe), zinc (Zn) and manganese (Mu) were measured. The Allium sativum group had weight gain and suppressed a hypertrophy of the kidney significantly. The activity of ALT was significantly lowered in the diabetic groups except Allium sativum group compared to STZ-control group. The Allium sativum and Allium tuberosum groups showed the hypoglycemic effects at 4 weeks. There were no significant differences between the control and all the other diabetic groups in the plasma levels of cholesterol, HDL-cholesterol, triglycerides and free fatty acids. Most of the Allium groups except Allium fistulosum were observed significantly lowered level of MDA in the lung compared to STZ-control group. The diabetic rats fed the Allium cepa and Allium sativum have shown significantly lowered hepatic Zn contents. The results suggested that the intake of the Allium vegetables may be effective in the antihyperglycemia by lowering blood glucose levels.

• KSBB Journal
• /
• 제14권3호
• /
• pp.328-336
• /
• 1999

A green microalga, Chlorella vulgaris UTX 259, was cultivated in a bench-scale raceway pond. During the culture, 15%(v/v) $CO_2$ was supplied and industrial wastewater discharged from a steel-making plant was used as a culture medium. In a small scale culture bottle, the microalga grew up to 1.8 g $dm^{-3}$ of cell concentration and ammonia was completely removed from the wastewater with an yield coefficient of 25.7 g dry cell weight $g^{-1}\;NH_3-N$. During the bottle-culture, microalga was dominant over heterotrophic microorganisms in the culture medium. Therefore, the amount of carbon dioxide fixation could be estimated from the change of dry cell weight. In a semi-continuous operation of raceway pond with intermittent lighting (12 h light and 12 h dark), increase of dilution rate resulted in increase of the ammonia removal rate as well as the $CO_2$ fixation rate but the ammonia removal efficiency decreased. Ammonia was not completely removed from the medium (wastewater) of raceway pond which was operated in a batch mode under a light intensity up to 20 klux. The incomplete removal of ammonia was believed due to insufficient light supply. A mathematical model, capable of predicting experimental data, was developed in order to simulate the performance of the raceway pond under the light intensity of sun during a bright daytime. Simulation results showed that the rates of $CO_2$ fixation and ammonia removal could be enhanced by increasing light intensity. According to the simulation, 80 mg $dm^{-3}$ of ammonia in the medium could be completely removed if the light intensity was over 60 klux with a continuous lighting. Under the optimal operating condition determined by the simulation, the rates of carbon dioxide fixation and ammonia removal in the outdoor operation of raceway pond were estimated as high as $24.7 g m^{-2} day^{-1}$ and $0.52 g NH_3-N m^{-2} day^{-1}$, respectively.

• Journal of Animal Environmental Science
• /
• 제17권2호
• /
• pp.71-80
• /
• 2011

Trickling filter has been extensively studied for the domestic wastewater treatment especially for the small scale plants in rural area. The purpose of this research is to survey the physical and microbial characteristics of wood chip media and the removal efficiency of animal wastewater using wood chip trickling filter system. The trickling filtration system comprises a filtration bed packed with wood chip media having a particle dia. of 5~7cm. The method comprises natural air from the bottom of the bed. The system also comprises a control mechanism including a time a constant discharge pump for controlling supply of the wastewater into the bed. The following conclusions were obtained from the results of this research. 1. The specific surface area of wood chip was 0.4123 $m^2$/g, pore volume was 0.0947 $cm^3$/g, density was 0.49 g/$cm^3$. It has forms of parallelogram and oblong which have numerous small pore space. This wood chip has been good condition for microorganism's habitat, having very larger specific surface area by complex the three dimension structure of cellulose at wood's major ingredients. 2. The total counts of in attached aerobic microbes were ranged from $10^6$ to $10^8$ CFU/g, and anaerobes microbial numbers were from $10^4$ to $10^7$. The aerobic microbial numbers appeared to be much more than those of anaerobic microbial numbers. 3. The average efficiency of $BOD_5$ and CODcr were 74.5% and 51.5%, respectively. The removal efficiency of T-N and T-P were 61.4%, 56.2%, respectively. But SS removal levels remain 19.3%.

• Korean Journal of Plant Resources
• /
• 제27권1호
• /
• pp.80-88
• /
• 2014

This study was carried out to understand the effect of sowing date on growth characteristics, flower duration of a total of 6 domestic rapeseed cultivars, "Sunmang", "Tammiyuchae", "Tamlayuchae", "Naehanyuchae", "Yongsanyuchae" and "Hallayuchae" with different sowing dates (25 Sept., 5 Oct., 15 Oct., 25 Oct., 5 Nov.) in Muan, Jeollanamdo, Republic of Korea. The results obtained were summarized as the follows: The number of seedling stand after overwintering was decreased in all 6 cultivars. It changed little until 5 Oct., and then showed continuously largely decrease as the sowing date being delayed. As the sowing date was being delayed, plant height was decreased while Silique length and thousand seed weight were increased. Seed yield in all 6 cultivars decreased almost linearly with late sowing date. In correlation analysis between the delaying sowing date and growth characteristics, it was inversely correlated with plant height ($r=-0.769^{**}$), No. of branches/plant ($r=-0.760^{**}$), No. of siliqua/panicle ($r=-0.631^{**}$) and seed yield ($r=-0.946^{**}$), while showed a positive correlation with silique length (r=0.635), seed diameter ($r=0.629^{**}$) and thousand grain weight ($r=0.422^*$). No. of seeds/silique and seed set percentage were not significantly correlated with the delaying sowing date. The flower duration was long in order of Sunmang, Tammiyuchae, Yongsanyuchae, Naehanyuchae, Hallayuchae and Tamlayuchae. Varietal variation of flowering date was larger with early sowing date than with delaying sowing date. The range of flower duration across all cultivars was from 1 day of Tamlayuchae to 14 days of Sunmang according to the sowing date, and the end flowering date was able to be extended from 2 to 9 days, compared to normal date of end flowering.

• Korean Journal of Food Science and Technology
• /
• 제33권5호
• /
• pp.507-513
• /
• 2001

An effective extraction methods of a garlic were investigated in order to improve the functional properties of the extracts. The solid yield, electron donating ability (EDA), nitrite-scavenging effects (NSE), peroxide value (POV) and total thiosulfinates contents of garlic extracts were determined. In order to improve the functional properties of extracts prepared with several organic solvents and acids, concentration and pH adjustment of the selected solvent and addition of acids and salts to solvents were also examined. Among the solvents tested, the methanol and ethanol extracts were found to be the most effective on the base of functionality and solid yields. The highest EDA, NSE and thiosulfinate value were obtained with 50% ethanol. The pH control of solvent and addition of citric acid, NaCl and phosphates to 50% ethanol did not affect on the functionality of the extracts. Therefore the optimal solvent for the best functional properties of garlic extract was 50% ethanol.