• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.161-174
• /
• 2011

The purpose of this study was to evaluate the effect of ethanol addition on efficacy of two-step total-etch adhesive under over-wet condition by measurement of remaining volatile part (RVP), microtensile bond strength (${\mu}TBS$), and degree of conversion (DC). Two-step total-etch adhesive, Optibond Solo Plus (Kerr, Orange, USA), was used. Experimental groups were divided into 8 groups: Group 1 (only 10 ${\mu}l$ adhesive), Group 2 (mixture of 3 ${\mu}l$ distilled water and 10 ${\mu}l$ adhesive), From Group 3 to Group 8 (mixture of 3 ${\mu}l$ distilled water, 10 ${\mu}l$ adhesive, and ethanol added in 1 ${\mu}l$ increment from 1 ${\mu}l$ to 6 ${\mu}l$). The mixtures were placed on slide glass and evaporated for 10 s, 30 s, and 60 s by air-drying. The weight of RVP was measured by precision weight. Same procedures were performed for ${\mu}TBS$ test and measurement of DC. The condition of mixed solution was observed under light microscope. For RVP weight, the weights of experimental groups except for group 1 decreased with the increase of air-drying time (p<0.05). The DC increased with the increase of air-drying time in only group 5 and 6 (p<0.05). The ${\mu}TBS$ increased with the increase of air-drying time in group only 5, 6, and 7 (p<0.05). The phase separation was examined and water blisters were diminished with the increase of air-drying time in group 5, 6, 7, and 8. Within the limits of this study, ethanol additionally applied to adhesive decreased RVP and increased DC and ${\mu}TBS$ under over-wet condition. It was shown that the addition of ethanol to two-step total-etch adhesive under over-wet condition would remove water and increase the efficacy of adhesive.

• Korean Journal of Food Science and Technology
• /
• v.22 no.3
• /
• pp.241-247
• /
• 1990

In order to develop a type of instant tea cassia tora seed, changes of constiuent amounts before and after roasting $(3{\pm}0.5min\;at\;170{\pm}5^{\circ}C)$ effective extracting solvent and it's optimum concentration, dehydration method and sensory scores were investigated. Moisture, lipid, reducing sugar, emodin and rhein were decreased by roasting, whereas protein, and total sugar of cassia tora increased. Color intensity and extracting efficacy were also increased. Of three kinds of solvent (water, methanol and ethanol), ethanol was highest in redness and yellowness of exeracts, and filtrate yield. Effective extracting concentration of ethanol for cassia tora was 50%(V/V). Freeze dry product(FDP) and spary dry product(SDP) showed coffee and aloe-like smell, coffee like brown color, rapid soluble in cold and hot water, and fast caking in air during storage. Free sugar contents were high in order of raffinose>fructose >glucose>maltose>sucrose Metallic contents were high in order of sodium>calcium>potassium>magnesium>iron. In sensory score for color, taste and aroma, FDP and SDP were both above 8.0 point, however, of them FDP more or less higher than SDP In addion, score in developing value as an instant tea was above 8.0 point (valuable).

• Proceedings of the Korea Database Society Conference
• /
• 2002.10a
• /
• pp.403-416
• /
• 2002

워크플로우 관리 시스템은 정부나 기업과 같은 조직의 작업을 처리하기 위한 비즈니스 프로세스를 컴퓨터를 기반으로 자동화함으로서 작업의 효율을 높이고 비용을 절감한다. 현재에 이르러 이런 워크플로우 시스템을 사용하는 조직들이 점차 거대화되어 가고 네트워크의 발달과 인터넷의 출현으로 인하여 워크플로우 시스템이 처리하여야 하는 작업의 수와 고객과 작업자 수 등이 빠른 속도로 증가하는 추세이다. 이런 추세에서 워크플로우 시스템은 거대 조직 환경에 적합한 워크플로우 시스템 아키텍쳐를 필요하게 된다. 이에 본 논문은 거대 조직 환경을 관리할 수 있는 워크플로우 관리 시스템으로 워크케이스 기반의 초대형 워크플로우 시스템의 아키텍쳐를 설계 및 구현 하고자 한다. 그리고 워크플로우 시스템 아키텍쳐를 분류, 분석하여 장단점을 가려내어 이를 기반으로 워크플로우 시스템 아키텍쳐의 성능을 예측하여 워크케이스 기반 워크플로우 시스템 아키텍쳐가 본 논문에서 제안하는 초대형 워크플로우 시스템의 아키텍쳐라는 것을 예측하여 본다. 또한 초대형 워크플로우 시스템을 위하하부 구조로 EJB(Enterprise Java Beans)를 사용하고 사용 이유를 기술한다. 본 논문에서는 이런 워크케이스 기반의 초대형 워크플로우 시스템 아키텍쳐를 위하여 개념적인 단계와 설계 단계, 구현 단계로 나누어 설계 및 구현을 하며 개념적인 단계에서는 워크케이스 기반 워크플로우 시스템 아키텍쳐에 대하여 상세히 기술하고 설계단계에서는 전체적인 기능 정의와 초대형 워크플로우 시스템의 구조를 설계한다. 그리고 구현 단계에서는 워크케이스 기반의 초대형 워크플로우 시스템 아키텍쳐를 실제 구현하기 위한 환경을 선택하고 구현 단계의 문제점들과 해결책을 기술한다. 다 솔레노이드방식 감압건조장치로 건조한 표고버섯으로 품위에 대한 유의성 검증결과, 표고버섯의 경우 온도별로는 색택과 복원률, 건조실 내부 압력별로는 수축률, 복원률에서 유의차가 있는 것으로 나타났다. 라. 본 연구에서 구명된 감압건조특성을 기초로 하여 배치식 감압건조기를 설계 제작에 활용하고자 한다.ational banks. Several financial interchange standards which are involved in B2B business of e-procurement, e-placement, e-payment are also investigated.. monocytogenes, E. coli 및 S. enteritidis에 대한 키토산의 최소저해농도는 각각 0.1461 mg/mL, 0.2419 mg/mL, 0.0980 mg/mL 및 0.0490 mg/mL로 측정되었다. 또한 2%(v/v) 초산 자체의 최소저해농도를 측정한 결과, B. cereus, L. mosocytogenes, E. eoli에 대해서는 control과 비교시 유의적인 항균효과는 나타나지 않았다. 반면에 S. enteritidis의 경우는 배양시간 4시간까지는 항균활성을 나타내었지만, 8시간 이후부터는 S. enteritidis의 성장이 control 보다 높아져 배양시간 20시간에서는 control 보다 약 2배 이상 균주의 성장을 촉진시켰다.차에 따른 개별화 학습을 가능하게 할 뿐만 아니라 능동적인 참여를 유도하여 학습효율을 높일 수 있을 것으로 기대된다.향은 패션마케팅의 정의와 적용범위를 축소시킬 수 있는 위험을 내재한 것으로 보여진다. 그런가 하면, 많이 다루어진 주제라 할지라도 개념이나 용어가 통일되지 않고

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.316-322
• /
• 2006

The current study evaluated the technical feasibility of the application of $TiO_2$ photocatalysis for the removal of nocotine which has well known as a representative material of environmental tobacco smoke(ETS). Four different preliminary experiments were performed for the evaluation of nicotine removal using photocatalyst-coated construction materials. The photocatalytic removal of nicotine was investigated for five parameters: dry condition of coating tiles, type of coating sol, number of coatings, relative humidity(RH), and input concentrations. Prior to performing the parameter tests, adsorption of nicotine onto the current experimental system was surveyed. All the variables tested in the present study exhibited to influence the photocatalytic decomposition of Nicotine. A dry condition of high temperature and short dry period presented higher photocatalytic oxidation(PCO) efficiency compared to that of low temperature and long dry period. ST-KO3 sol showed higher decomposition efficiency than E-T Sol. The PCO efficiency increased as the number of coating increased. High humidity and low input concentrations exhibited higher PCO efficiency. Consequently, it is noted that the five parameters tested in the present study should be considered for the application of photocatalyst-coated construction materials in cleaning nicotine in ETS.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.41-41
• /
• 2022

제주 내 크게 6개 지역에 흩어져 분포하고 있는 곶자왈은 화산활동으로 형성되었으며 제주 산림생물자원의 46%가 분포하여 생물종다양성이 매우 높은 것으로 알려져 있다. 곶자왈은 자갈과 바위로 이루어져 있으며 토양이 적게 발달하여 건조에 직면할 가능성이 크다. 본 연구는 곶자왈에서 서식하는 멸종위기종이자 산림청에서 희귀식물로 지정한 개가시나무(Quercus gilva)와 같은 속이면서 공존하고 있는 종가시나무(Quercus glauca)의 건조 내성에 대한 반응을 알아보고자 실내에서 생리 반응을 연구하였다. 온도(22±2.94℃)와 토양 양분(10%)은 자생지의 값을 기준으로 처리하였으며 수분 처리는 토양을 채운 화분에 물이 화분 밑으로 새어나가기 직전까지 포장용수량 700mL를 공급한 후 27일간 단수하였다. 단수기간에 수분함량의 변화는 토양수분함량측정기(Watch Dog)를 설치하여 데이터를 수집하였다. 항목은 토양수분함량에 따른 광합성률, 증산률, 수분이용효율, 기공전도도, Fv/Fm, Fo, Fm, 엽록소함량을 측정하였다. 토양수분함량은 25, 27일째를 제외한 기간에 개가시나무가 종가시나무보다 높았다. 광합성률은 27일째를 제외한 기간에 개가시나무가 종가시나무보다 높았다. 증산률은 4, 5, 11, 14, 25, 27일째에 개가시나무가 종가시나무보다 낮았다. 수분이용효율은 13일째를 제외한 기간에 개가시나무가 종가시나무보다 높았다. 기공전도도는 3, 9일째에 개가시나무가 종가시나무보다 높았다. Fv/Fm은 22, 27일째를 제외한 기간에 개가시나무가 종가시나무보다 높았다. Fo은 3, 14일째를 제외한 기간에 개가시나무가 종가시나무보다 높았다. Fm과 엽록소함량은 기간에 개가시나무가 종가시나무보다 높았다. 이와 같은 실험 결과로 보았을 때 개가시나무가 종가시나무보다 건조 내성에 강한 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.622-628
• /
• 2017

In order to develop value-added utilization technology of domestic oaks the processing yield rate from the standing tree to the flooring material for the Quercus variabilis and Quercus mongolica were investigated. Also, to reduce drying time, improved drying schedule was applied and the physical properties were measured. The drying time was 173 hours in total, and the final moisture content was 5.39% (Quercus variabilis) and 4.17% (Quercus mongolica). The color difference of oak lumber before and after drying showed a significant change as ${\Delta}E$ value from 7 to 11. The shrinkage rates of Quercus variabilis and Quercus mongolica during drying were 8.1% and 8.5% in the tangential direction and 5.0% and 6.2% in the radial direction, respectively. The lumber manufacturing yield rate of sawn lumber was 30 to 40% and that of the final product was 8 to 15%. It is expected that the processing characteristics of the Quercus species investigated in this research could contribute to formulate an efficient production plan of domestic hardwoods that are still under utilization.

• Water for future
• /
• v.29 no.6
• /
• pp.179-188
• /
• 1996

The chronical sequences of daily precipitation are of great practical importance in the planning and operational processes of water resources system. A sequence of days with alternate dry day and wet day can be generated by two state Markov chain model that establish the subsequent daily state as wet or dry by previously calculated vconditional probabilities depending on the state of previous day. In this study, a synthetic generation model for obtaining the daily precipitation series is presented by classifying the precipitation amount in wet days into multi-states. To apply multi-state Markov chain model, the daily precipitation amounts for wet day are rearranged by grouping into thirty states with intervals for each state. Conditional probabilities as transition probability matrix are estimated from the computational scheme for stepping from the precipitation on one day to that on the following day. Statistical comparisons were made between the historical and synthesized chracteristics of daily precipitation series. From the results, it is shown that the proposed method is available to generate and simulate the daily precipitation series with fair accuracy and conserve the general statistical properties of historical precipitation series.

• Korean Journal of Food Science and Technology
• /
• v.47 no.3
• /
• pp.281-285
• /
• 2015

An oleaginous fungus was isolated from soil and identified as Mortierella sp. (M-12) for producing arachidonic acid (AA). Cell disruption methods, extraction methods, and particle sizes of freeze-dried biomass were tested to achieve maximum extraction of total lipids and AA. M-12 grown in glucose yeast media at $25^{\circ}C$ for 7 days contained 35.5% total lipid, and 47% of the total lipid was AA. Lipid extraction yield from wet biomass was shown to be similar to that in a dry state. Maximum lipid extraction was achieved using a mixture of chloroform and methanol (2:1) as an extraction solvent. Different mechanical cell disruption methods did not affect lipid extraction yields. The smaller the particle size of the biomass, the better the lipid extraction yield was observed. Particle size of biomass was shown to more strongly affect lipid extraction than extraction time. The highest AA content was observed in the class of neutral lipids.

• Current Research on Agriculture and Life Sciences
• /
• v.21
• /
• pp.1-9
• /
• 2003

Plants are often subjected to periods of soil and atmospheric water deficit during their life cycle. To find critical levels for identification of tolerant rice variety to salt- and drought-stresses, we investigated the water deficiency in the leaf of a Dongjinbyeo (DJ) cultivar, identified as intolerant variety, subjected to NaCl- and Polyethylene glycol 6000 (PEG)- treatments. The relative water content and water potential in leaf of DJ plant sharply declined along the high concentration and time after treatment in NaCl- and PEG-treated rice plants. To elucidate the method of simple screening of tolerant variety to salt- and drought-stresses, we examined the relationship between relative water content and water potential of leaves in NaCl- and PEG-treated rice plants. The relationship between relative water content and water potential in leaf of DJ plant showed the highest correlation in 80 mM NaCl-treatment, and showed high correlation only 8% PEG treatment. These results indicate that the critical level of salt stress for screening of tolerant rice was 80 mM NaCl at 48 h after NaCl treatment, and the critical concentration of drought stress for screening of tolerant rice was 8% PEG at 96 h after PEG treatment.

• Journal of Aquaculture
• /
• v.19 no.4
• /
• pp.299-304
• /
• 2006

This study was conducted to investigate the effects of protein and lipid levels of extruded pellet on growth and body composition of juvenile flounder. Six extruded dry pellets were formulated to contain two protein levels (50 and 55%) and three lipid levels (8, 12 and 15%). Triplicate groups of fish (initial mean weight 21 g) were hand-fed to apparent satiation two times a day for 9 weeks. Survival, weight gain and daily feed intake were not significantly affected by dietary protein and lipid levels. Feed efficiency and protein efficiency ratio were significantly (P<0.001) affected by dietary lipid level, and tended to increase as dietary lipid level increased. Feed efficiency ratio of fish fed the 55% protein diet with 15% lipid was not significantly different from that of fish fed the 50% protein diet with 15% lipid, but significantly (P<0.05) higher than that of fish fed the other diets. Protein efficiency ratio of fish fed the 55% protein diet with 15% lipid was significantly (P<0.05) higher than that of fish fed the 50% protein diet with 8% lipid and 55% protein diets with $8{\sim}12%$ lipids. The contents of moisture, crude protein and lipid in the liver was significantly (P<0.01) affected by dietary lipid level. The results of this study indicate that an increase in lipid level at 50-55% protein in extruded pellet can improve feed efficiency for juvenile flounder.