• Journal of Animal Environmental Science
• /
• v.11 no.1
• /
• pp.25-34
• /
• 2005

The study aimed to develop a tractor drawn animal slurry manure sub-soil injector for arable land and thus, can reduce the waste management cost through effective treatment and utilization of animal slurry manure. The application of animal slurry manure to agricultural land will probably be one of the most effective ways to enrich the soil with vital nutrients. However, some existing slurry manure spenders are not suitable in the field because of their adverse effects to the environment. Based on this premise, a prototype was designed and assembled using 5 sub-soiling standards attached to the sin injector device. The traction force of the Prototype measured in the depth of 10 cm and 15 cm from the ground surface of a paddy field was 1,062 kgf and 1,214 kgf, respectively. A unique feature of the machine was that there was an equal volume of slurry manure flowing from each delivery pipe and regulated by a pressurized container that was likewise synchronized with the speed of the tractor The sub-soiling manure injection system can mitigate or reduce the harmful emission of obnoxious gases and malodor during the injection operation.

• Korean Journal of Food Science and Technology
• /
• v.46 no.5
• /
• pp.601-608
• /
• 2014

In this study, we investigated the antioxidant activity of green kohlrabi juice (GKJ) and purple kohlrabi juice (PKJ) using various in vitro methods. The results of 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) radical scavenging activities, ferric ion reducing antioxidant power (FRAP), reducing power, and nitrite scavenging activities showed that GKJ possessed higher antioxidant activity than PKJ. Green kohlrabi powder (GKJP) and purple kohlrabi powder (PKJP) inhibited hydrogen peroxide-induced cell death in human dermal fibroblasts. In addition, GKJP and PKJP suppressed intracellular reactive oxygen species (ROS) production induced by hydrogen peroxide in human dermal fibroblasts. These results suggest that green and purple kohlrabi juices are potential natural sources of antioxidants.

• Korean Journal of Food Science and Technology
• /
• v.52 no.2
• /
• pp.177-182
• /
• 2020

This study evaluated the effect of steam heating, gamma irradiation, and ultraviolet (UV) irradiation on microorganism reduction in order to determine an effective sterilization method for red pepper powder. The effect of each treatment on the reduction of thermoduric bacteria and total aerobic bacteria in red pepper powder were as follows: 10 kGy gamma irradiation, reduction of 4 log and 6 log CFU/g, respectively; 12 mW/㎠ UV irradiation (264 nm UV-C), reduction of less than 1 log CFU/g; steam heating at 120℃ for 40 s, reduction of approximately 2 log CFU/g. High-temperature short-time processing at 110℃ for 30 s reduced the total bacterial count in Gochujang solution from 5.70 log CFU/g to 2.26 log CFU/g; at 121℃, the solution was commercially sterile. Steam heating resulted in 1, 2, and 4 log microbial inactivation in garlic, onion, and pepper powder, respectively. Steam sterilization, which consumers prefer over other methods, may be an effective method for reducing microorganisms in spice powders, including those in red pepper powder.

• Asian Journal of Turfgrass Science
• /
• v.23 no.2
• /
• pp.279-286
• /
• 2009

This study was carried out to utilize the waste heat from office building for turfgrass culture on a roof garden. Heating system had been installed in the middle of soil profile on the turf areas in the garden plots. The results showed that the installation of heating system increased the shoot density, turfgrass quality, coverage rate, and root length compared with the control plots. The surface temperature of heating plots reached at $10.9^{\circ}C$ when the control plot showed $0^{\circ}C$, however, the soil moisture content was decreased 1.9% by the heating system. When the height of the snow accumulation reached over a 15cm, the it took only 4 days to melt out completely, while the height did not changed those period at the control plots. When the water temperature in boiler increased to $60^{\circ}C$ from a proper temperature of $55^{\circ}C$ in turf growth, the desiccation from leaf tip was started to occur caused by drought stress. More detail research should be followed in stress physiology in turf management in roof garden operation.

• Korean Journal of Plant Resources
• /
• v.13 no.2
• /
• pp.95-103
• /
• 2000

To study the effects of soil moisture and texture on characteristics of growth, content of saikosaponins and activity of antioxidative enzymes in Bupleurum falcatum L., content of saikosaponins(a, c and d) and activities of superoxide dismutase(SOD) and peroxidase(POD) were investigated with two Bupleurum genotypes(Jangsoo and Samdo). Two Bupleurum genotypes were grown under different soil moisture(deficit, normal, surplus) and soil texture(sandy, sandy loam, loam) conditions. Among the tested soil conditions, dry weight accumulation rate of both cultivars could be ranked in the order surplus > normal > deficit soil for soil moisture and sandy > sandy loam > loam for soil texture. Under the surplus soil condition, growth retardation of Samdo cultivar was more severer than that of Jangsoo. Furthermore, content of saikosaponin a, d, and c also could be ranked in the order deficit > normal > surplus and sandy > sandy loam > loam for soil moisture and texture, respectively. Although both Jangsoo and Samdo cultivars grown under water deficit condition showed the highest POD and SOD activity, in general POD and SOD activity in both shoot and root was remarkably high in Jangsoo cultivar compared with Samdo. Saikosaponin content of root was positively correlated with POD and SOD. However, shoot and root length were negatively correlated with POD.

• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.385-392
• /
• 2018

The slope stabilization analysis was performed by conducting survey and selecting the representative section in order to improve slope composition and management technology of masonry embankments in the quarry area, The mean slope of the masonry retain wall (A, B, C, D, E, F) was $38.5^{\circ}$, although the steep slope of the lowest slope (A) as $59^{\circ}$. The horizontal distance of the masonry embankments is 66.2 m and the slope height is 48.3 m. However, the inclination of the masonry embankments is relatively steep and visually unstable. The slope stability analysis for the slope stability analysis was taken into account during the drying and saturation. The slope stability analysis during saturation was performed by modeling the fully saturated slope. The strength constants of the ground were divided into two groups. The safety factor for dry period was 1.850 and the safety factor for rainy season was 1.333. The safety rate of dry period and rainy season was above 1.5 and 1.2. However, the weathered granite on the upper part of the masonry embankments at the time of heavy rainfall is considered to have a high risk of slope erosion and collapse. Therefore, it is considered necessary to take measures for stabilization through appropriate maintenance such as drainage installation.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.3
• /
• pp.329-338
• /
• 2019

Suction of unsaturated bentonite buffers is a very important input parameter for hydro-mechanical performance assessment and design of an engineered barrier system. This study analyzed suction measurement techniques and constitutive models of unsaturated porous media reported in the literature, and suggested suction measurement techniques and constitutive models suitable for bentonite buffer in an HLW repository. The literature review showed the suction of bentonite buffer to be much higher than that of soil, as measured by total suction including matric suction and osmotic suction. The measurement methods (RH-Cell, RH-Cell/Sensor) using a relative humidity sensor were suitable for suction measurement of the bentonite buffer; the RH-Cell /Sensor method was more preferred in consideration of the temperature change due to radioactive decay heat and measurement time. Various water retention models of bentonite buffers have been proposed through experiments, but the van Genuchten model is mainly used as a constitutive model of hydro-mechanical performance assessment of unsaturated buffers. The water characteristic curve of bentonite buffers showed different tendencies according to bentonite type, dry density, temperature, salinity, sample state and hysteresis. Selection of water retention models and determination of model input parameters should consider the effects of these controlling factors so as to improve overall reliability.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.91-91
• /
• 2019

전북 완주군 농가에서 2017년 12월에 재배한 '시베리아'와 '메두사' 품종을 1시간 이내에 국립원예특작과학원 실험실로 이동하였다. 알약(SmartFreshTM, AgroFresh Inc., USA)형태의 1-MCP를 1.875g/3.55m3 기준으로 정량하여 Activator Kit(SmartFreshTM, AgroFresh Inc., USA)에 넣어 마개를 닫고 몇 번 흔들어주어 녹인 후 1.5 ppm이 되도록 처리하였으며 3시간 훈증 후 30분 환기하였다. 훈증처리 후 절화 백합은 유공 필름 슬리브를 이용하여 포장한 후 골판지상자에 넣어 모의 수출환경에서 수송방식은 건식(건조처리)상태로 $4^{\circ}C$ 저장고에 암상태로 저장하면서 무처리를 대조로 에틸렌 노출 조건 조성을 위하여 후레쉬라이프(탑프레쉬) 5g 봉지를 상자내부 5개, 상자외부 저장고 내에 10개로 총 15개의 에틸렌 발생제 처리를 하였다. 백합 절화 신선도 유지기간 연장을 위한 선도유지제 전처리 효과는 1.5 ppm 1-MCP 3시간 훈증처리에 의해 잎의 황화현상을 지연시키는 효과가 있었다. 전체적으로 판정한 절화수명은 '시베리아'는 무처리 9.0일, 1-MCP 훈증 9.0일, 에틸렌 발생제 8.3일, 1-MCP 훈증+에틸렌 발생제 9.5일이었으며 '메두사'는 무처리 6.5일, 1-MCP 훈증 7.5일, 에틸렌 발생제 5.7일, 1-MCP 훈증+에틸렌 발생제 8.5일로 나타났다. 에틸렌에 노출은 꽃의 빠른 노화를 야기하여 절화수명을 단축 시켰으며 이상개화를 보이는 꽃도 있어 상품성이 크게 떨어졌다. 1-MCP에 의해 잎의 황화 억제에 효과적이었으며 저장 중 에틸렌 발생제를 동시에 처리하였을 때 품질유지 효과가 더 크게 나타났으며 '메두사' 품종에서는 만개시 화색도 더 진하게 나타났다. 따라서, 저온저장이나 선적시 에틸렌 발생이 많은 품목과 혼합하게 될 것이 예상될 경우에 품질유지를 위해 1-MCP 훈증처리를 하면 효과적일 것으로 사료된다.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.339-344
• /
• 2021

In order to improve the PEMFC (Proton Exchange Membrane Fuel Cell) durability, it is important to accurately evaluate the durability of the membrane in a short time. Recently, DOE (Department of Energy) reported a protocol that combines the chemical and mechanical durability of membranes to evaluate them effectively. This protocol applies chemical/mechanical deterioration to the membrane by repeating wet/dry while OCV (Open Circuit Voltage) holding. The problem of this protocol is that it is highly affected by electrode degradation due to change cycles in OCV and that the evaluation time is long. By using oxygen instead of air as the cathode gas while leaving the other conditions of the DOE protocol as it is, the durability evaluation time could be reduced from 408 hours to 144 hours. By reducing the number of voltage change cycles to 1/3, the electrode degradation due to the voltage change cycle was reduced to 1/12 when oxygen was used compared to air at the end, thereby enabling more accurate evaluation of polymer membrane durability.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.498-505
• /
• 2020

Aggregate occupies about 70-85% of the concrete volume and is an important factor in reducing the drying shrinkage of concrete. However, when constructing high-rise buildings, it acts as a problem due to the high load of natural aggregates. If the load becomes large during the construction of a high-rise building, creep may occur and the ground may be eroded. Material costs increase and there are financial problems. In order to reduce the load on concrete, we are working to reduce the weight of aggregates. However, artificial lightweight aggregates affect the interface between the aggregate and the paste due to its higher absorption rate and lower adhesion strength than natural aggregates, affecting the overall strength of concrete. Therefore, in this study, in order to grasp the interface between natural aggregate and lightweight aggregate by type, we adopted a method of measuring electrical resistance using an EIS measuring device, which is a non-destructive test, and lightweight bone. The change in the state of the interface was tested on the outside of the material through a blast furnace slag coating. As a result of the experiment, it was confirmed that the electric resistance was about 90% lower than that in the air-dried state through the electrolyte immersion, and the electric resistance differs depending on the type of aggregate and the presence or absence of coating. As a result of the experiment, the difference in compressive strength depending on the type of aggregate and the presence or absence of coating was shown, and the difference in impedance value and phase angle for each type of lightweight aggregate was shown.