• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.522-522
• /
• 2023

지하수 시스템의 방출은 저지대 강에서 건조기에 흐르는 하천 유지유량의 원천이 된다. 수자원 분야에서 분포형 모형이 도입되며 수문 분석의 고도화가 이루어지고 있는 오늘날에도, 아직 대수층 깊이 등 지하수관련 매개변수에 대한 연구는 미진한 실정이다. 본 연구는 분포형 모형의 지하수 관련 매개변수 중 지형자료에 해당하는 대수층 깊이의 물리적인 분포형태를 예측하고, 지하수 모의결과를 검토하여 해당 기법의 적용성을 확인하였다. 본 연구에서는 북측의 미계측 유역을 포함한 소양강 유역을 연구대상 지역으로 설정하였고, 정밀한 분포형 모형인 GSSHA(Gridded Surface Hydrologic Analysis)를 활용하였다. 대수층 깊이 추정 방법은 크게 세가지 시나리오로 구분하여 모의를 진행하였다. 유역의 지하수 데이터를 통해 도출된 대수층깊이 등분포(시나리오1), 지표 고도와 대수층 깊이의 선형 반비례 관계를 가정한 선형 회귀식(시나리오2), 동일한 가정을 두고 Log차원에서 회귀식을 적용한 경우(시나리오 3). 위 3가지 시나리오를 통해 산정된 유출량과, 지하수 수위 등을 소양강댐 유입량 자료 및 유역 내 6개 지하수 관측소를 대상으로 결과를 비교하여 적용성을 확인하였다. 시나리오별 유출량 모의 오차평가 결과, 관측 첨두 유량을 가장 잘 반영하고 있는 기법은 일반적으로 선행 연구에서 많이 활용하고 있는 등분포형 기법으로 분석되었으며, 과소·과대 모의된 정도를 나타내는 지표와 모형의 효율성을 나타내는 지표는 선형 회귀분석 기법이 가장 우수한 결과로 분석되었다. 따라서, 대수층 깊이를 등분포하여 모의하던 기존 방식에 비해 지면고도-대수층깊이 간의 반비례 관계를 적용하는 방식이 지하수 모의에 있어서 보다 합리적일 것으로 판단된다. 향후 임의의 인자와 대수층 깊이간의 정밀한 회귀관계를 도출한다면 더욱 합리적이고 신뢰성 높은 결과를 얻을 수 있을것으로 기대된다. 또한 유역 단위의 지하수 모의가 정밀하게 이루어진다면 최근 많은 관심이 집중되는 하천 유지유량과 건기 유출 등의 연구 분야에도 많은 기여를 할 수 있을 것으로 기대된다.

• Analytical Science and Technology
• /
• v.30 no.5
• /
• pp.270-278
• /
• 2017

The absorption of blood onto the surfaces of white cotton, polyester, rayon, and nylon fabrics was studied. Different categories of fabrics (woven and knitted) with diverse thickness, were manually folded twice to obtain four fabric layers, and $100{\mu}L$ of human blood was dropped onto the surface of the fabrics. The amount of blood that penetrated the fabric layer and the shape of bloodstain observed on the fabrics were influenced by the chemistry, thickness, and texture of the fabric. The blood bearing fabrics were left to dry for 3 days, washed by hand using tap water, and Lumiscene was then sprayed onto the fabrics to enhance the latent bloodstain for comparison of the shape of the bloodstain before and after washing by hand. The features of the bloodstain after washing varied greatly with the recipient fabrics. Additionally, stronger luminescence was observed at the surface where the blood was deposited compared to the background. However, it was confirmed that physical contact during the washing can deform the original shape of the bloodstain. The effect of the drying time on the bloodstain after hand washing was also studied. $100{\mu}L$ of blood was dropped on the surfaces of the fabrics and dried for 0, 1, 12, 24, 72 h, and 7 days, then washed by hand, before the bloodstain was enhanced with Lumiscene. The results of this experiment indicated that the increased drying time induces stronger chemiluminescence of Lumiscene. However, after drying of the bloodstain for 7 days, the luminescence of the bloodstain was decreased at the blood deposited site and increased around the blood deposited site.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.3
• /
• pp.3-15
• /
• 1986

This study was carried out to investigate the drying rate and drying defects of Populus euramericana using the SDR (Saw-Dry-Rip) process. Flitches for SDR process were rough edged for compact kiln stacking, and then kiln-dried to 10 percent moisture content with dimensions in the same run, using the kiln-drying schedule ($T_8-F_4$) recommended by Rasmussen. The results obtained were as follows: 1. Drying rate of dimensions was slower than that of flitches. 2. Final moisture content and moisture distribution of dimensions were lower than those of flitches. 3. Average bowing, cupping, crooking, and twisting were reduced 20 percent, 25 percent, 54.9 percent, and 13.4 percent by SDR process respectively. 4. Bowing and cupping were more severe in dimensions from the area near the pith than in those from the area near the bark, and for crooking and twisting the reverse was true. 5. Surface checking of dimensions developed less than that of flitches and end checking of dimensions was similar to that of flitches. 6. Honeycomb, thickness shrinkage, and collapse of dimensions were similar to those of flitches. 7. The degree of casehardening of dimensions was higher than that of flitches.

• Magazine of the Korea Concrete Institute
• /
• v.5 no.2
• /
• pp.181-188
• /
• 1993

In this study, a numerical method for the material nonlinear analysis of reinforced concrete shell structures including the time dependent effects due to creep and shrinkage is developed. Degenerate shell elements with the layered approach are used. The perfect or strain hardening plasticity model in compression and the linearly elastic model in tension until cracking for concrete are employed. The reinforcing bars are considered as a steel layer of equivalent thickness. Each :steel layer has an uniaxial behaviour resisting only the axial force in the bar direction. A bilinear idealization is adopted to model elasto-plastic stress-strain relationships. For the nonlinear anaysis, incremental load method combined with unbalanced load iterations for each load increment is used. To include time dependent effects of concrete, time domain is divided into several time steps which may have different length. Some numerical examples are presented to study the validity and applicability of the present method. The results are compared with experimental and numerical results obtained by other investigator.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.535-540
• /
• 2012

This study is to research the differences of tear film for young people in of a day in a restricted indoor space. The subjects are 58 eyes volunteers for twice preliminary inspection and tear test of a day. 58 healthy individuals with no eye disease, no body disease, orthophoria, corrective visual acuity more than 0.8, binocular spherical equivalence difference over 0.50 diopter, the flattest corneal curvature in horizontal meridian and the steepest corneal curvature in vertical meridian were tested. The uncorrective visual acuity, refractive error, corneal curvature, schirmer test and tear break up test were performed in the morning and afternoon. Schirmer test were $16.0{\pm}7.0mm$ in the morning and $14.1{\pm}7.1mm$ in the afternoon. TBUT were $11.3{\pm}0.6$ sec in the morning and $12.1{\pm}0.9$ sec in the afternoon. They have no significant differences.

• Journal of the Korean Geophysical Society
• /
• v.2 no.4
• /
• pp.251-258
• /
• 1999

A high-resolution seismic survey was conducted on the abandoned tidal flat in Shihwa Lake on the west coast of Korea. A portable vibrator was used as a seismic source and 217 shot gathers with 48-channel system were acquired. F-k filtering, residual static corrections and post-stack frequency filtering are found to be useful for signal enhancement. The overburden is divided into two seismic depositional units. Unit I is deposited in tidal environment characterized by parallel and high continuity reflection pattern. This unit comprises a dry layer (Unit Ia) and a wet layer (Unit Ib) having averagely 5 and 15 meters thick, respectively. Unit II unconformably overlain by Unit I exhibits discontinuity and hummocky reflection pattern, indicating complex channel-fill sediments in estuary. The maximum thickness of this unit is approximately 20 meter. Acoustic basement is considered as Precambrian granitic gneiss occurred in the surrounding area.

• Composites Research
• /
• v.33 no.6
• /
• pp.336-340
• /
• 2020

In this study, carbon aerogels (CA) were prepared by sol-gel polycondensation of resorcinol and furfural in isopropanol using hexamethylenetetramine as a catalyst, and then directly drying the organic gels under isopropanol freeze-drying conditions, followed by carbonization under a nitrogen atmosphere. The preparation conditions of the CA were explored by changing the mole ratio of resorcinol to furfural. The effect of the preparation conditions on the pore structure of the CA was studied by nitrogen adsorption isotherms. The characteristics of the CA were studied by scanning and transition electron microscopy, and infrared spectrometry. The accessibility of pores and performance of the CA as an electrode in electric double layer capacitors were also electrochemically investigated. As a result, BET surface area and specific capacitance increased with the molar ratio of resorcinol to catalyst (R/C) ratio; the maximum values of 765 ㎡/g and 132 F/g were achieved at the R/C ratio of 200, respectively. Consequently, it was confirmed that increasing the R/C ratio increased the average pore size of the CA electrode, which improved the rate capability of the system.

• Journal of Sensor Science and Technology
• /
• v.9 no.3
• /
• pp.233-241
• /
• 2000

This paper presents comparative results of various commonly used anti-stiction methods for polysilicon surface micromachining using identical test structures. Four different types of cantilevers - single cantilevers, cantilevers with dimples, cantilevers with anti-stiction tip, cantilevers with plate - with different widths and lengths were employed as test structures. The detachment length of cantilevers was examined depending on the anti-stiction methods and test structure types. After sacrificial layer was removed, evaporation and sublimation drying methods were used in the drying step when takes place the stiction between structure and substrate. Various final rinsing liquids such as methanol, IPA, and DI water were employed to compare anti-stiction results depending on surface tension and rinsing temperature. For sublimation drying method, methanol was used as an intermediate rinsing liquid. Also, the influence of a stress gradient of the polysilicon was investigated by performing the identical anti-stiction experiments on identical test structures with a stress gradient. In conclusion, sublimation drying method showed superior results to various evaporation drying methods and hence it is considered the best method for releasing polysilicon microstructure in polysilicon surface micromachining.

• Food Industry
• /
• s.99
• /
• pp.32-37
• /
• 1989

양질의 국산 생강엑기스 제조기술 개발을 위한 본 연구결과를 요약하면 다음과 같다. 1) 본 연구에서 시료로 사용한 생강은 전라북도 봉동산과 충청남도 서산산이며, 이들 건강은 수분이 약$10\%$, 회분 $8\~9\%$, 조지방 $4\~5\%$이다. 2) 생강엑기스의 유효성분들은 건강입자에 내포되어 있는 상태에서 추출 속도는 반응층을 통한 확산모델로 설명된다. 침출 효율을 개선하기위해서는 다음과 같은 조건이 필수적이다. 3) 건강의 입자는 $10\~20{\mu}m$정도의 전분입자가 될수록 많이 노출되도록 160목을 통과하는 작은 입자로 분쇄하면 추출효율은 최대화 할 수 있다. - 추출온도는 엑기스의 주요성분의 손실이 무시되는 최대온도, $40^{\circ}C$가 최적이다. - 160목, $40^{\circ}C$에서 추출시간 3-4시간이 최적이다. - 이같은 조건에서의 엑기스 회수율은 약 $8\%$이다. 4) 엑기스내의 비자극성 성분은 회분 $0.5\~0.8\%$, 조지방 $1.2\~1.8\%$, 조단백 $2.8\~3.5\%$이고, 유리당은 거의 침출되지 않는다. 엑기스내의 주요 지방산은 Linoleic acid가 가장 많이 함유되어 있다. 5) 기계건조보다 일광건조에 의한 건강에서 추출된 엑기스의 품질이 양호하며, 외국산 고급 엑기스와 품질면에서 대등한 것이다. 6) 위와 같은 결과는 TLC로 분리하고 분리된 각 Spot를 HPLS로 분석, IR, NMR, LC/MS를 사용하여 주요성분을 확인 및 정량화하였다. 이로부터 엑기스내의 주요성분은 gingerol이 약 0.38, Shogaol이 약 0.027, 그리고 Paradol이 0.03의 농도분율을 가지고 있음을 알았다. 7) 기계건조 건강으로부터 얻은 엑기스는 상온 $\~100^{\circ}C$ 범위에서 휘발 및 열분해에 의한 무게감량이 양건강에 비해 약 2.7배나 높다. 그러므로 생강엑기스를 사용하여 제조되는 생강차 제조시 열풍건조($60^{\circ}C$, 30분)는 품질에 지대한 영향을 미친다는 것을 발견하였다. 8) 생강엑기스 제조는 건강 재배방법 저장기간과 방법, 건조방법이 건강특성을 좌우한다. 9) 본 연구에서 제시된 열분석(DSC와 TGA)방법을 도입한다면 신속하고 경제적으로 생강 엑기스 품질을 평가하는 데에 큰 기여가 있을 것으로 생각된다. 10) 양호한 생강차를 만들 수 있다고 선정된 엑기스는 수입 엑기스와 함께 양건강의 제품이다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.4
• /
• pp.199-206
• /
• 2011

The influence of water salinity on the hydraulic conductivities of compacted bentonites with several dry densities were studied. The hydraulic conductivity increases with increasing salinity only when the dry density of bentonite is relatively low. The degree of increase becomes more remarkable at a lower dry density of bentonite. For bentonite with the density of 1.0 $Mg/m^3$ and 1.2 $Mg/m^3$, the hydraulic conductivity of the 0.4 M NaCl solution increases up to about 7 times and 3 times, respectively higher than that of freshwater. However, for the bentonite with a dry density higher than 1.4 $Mg/m^3$, the salinity has an insignificant effect on the hydraulic conductivity, and the hydraulic conductivity is nearly constant within the salinity range of 0.04 to 0.4 M NaCl. The pre-saturation of the bentonite specimen with freshwater has no significant influence on the hydraulic conductivity.