• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.7
• /
• pp.1024-1029
• /
• 2010

Opuntia ficus-indica and Aloe vera slices were dried using 20, 30, and 40% polyethylene glycol (PEG) 4,000 as a dehydration agent, and the dried samples were compared with the hot-air dried and freeze dried in terms of rehydration ratio, color, and sensory evaluation. The moisture content of the PEG-treated samples decreased with increasing concentrations of polyethylene glycol. The rehydration ratio of the PEG-treated samples was better than those of the hot air-dried or freeze-dried samples. The color of the PEG-treated samples was similar to that of the freeze-dried samples and better than that of the hot air-dried samples. The sensory evaluation of PEG-treated samples was better than those of the hot air-dried or freeze-dried samples. These results suggest that dehydration of Opuntia ficus-indica and Aloe vera slices using PEG is very effective in terms of rehydration ratio and minimal damage of cell structure.

• Food Science and Preservation
• /
• v.11 no.2
• /
• pp.269-275
• /
• 2004

This study was conducted to develop an optimization model using Box's Complex Algorithm, and to determine optimum operating conditions to minimize costs for the drying and storage system using the grain cooler. To minimize the system operation cost, the optimum moisture contents after the first drying were found to be from 17.2 to 19.8 %. And optimum drying and cooling capacities were obtained. The combination of the dryer and grain cooler was found to be economical, showing enhancement of the drying capacity over 50%, and decrease of drying cost over 10%. When the circulating grain dryers of 6 and 20 ton/batch were used in conjunction with the grain cooler, the cost required for drying and storage system for paddy were 28,464∼33,317won/ton and 20,588∼26,511 won/ton, respectively, which was from 2.6 to 27.3% lower than that of conventional drying and storage system.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.108-114
• /
• 2002

Red pine(Pinus densiflora) square timbers with 14.0 cm and 16.5 cm of face size and 24 m long were dried in a vacuum-press kiln and in a radio-frequency/vacuum(RF/V) kiln to compare drying rate, moisture content(MC) distribution and specific energy. RF/V drying rate was higher than vacuum-press drying rate. The effect of size of cross section on the RF/V drying rates were more pronounced than those of vacuum-press drying. The longitudinal- and the transverse MC distribution of dried square timber showed convex profile for the vacuum-press drying and concave profile for the RF/V drying. Moisture gradient of width direction was similar to the thickness direction in vacuum-press dried square timber and was more slight than that of the thickness direction in the RF/V dried large square timber. The specific energy consumption curve increased as MC decreased. Specific energy(kWh/kg of water evaporated) of the vacuum-press process required more than that of the RF/V process.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.46-51
• /
• 2004

The objective of this study was to evaluate the applicability of high temperature drying to pitch pine (Pinus rigida) lumber, especially intended for use as lamina of structural glued laminated timber (glulam), to enhance the efficient utilization and provide added-value to that species. The high temperature schedule and drying procedures utilized were shown to be reasonable for drying glulam lamina due to the occurrence of small moisture gradients, minimal residual drying stress, and low warpage. Through preliminary tests, it was confirmed that residual resin at lamina surfaces did not adversely affect the gluing process. However, quantitative analysis of resin is required for developing a method to constrain the occurrence of pitch trouble with respect to decreasing long-term adhesive and finish durability of glulam in use after manufacturing. The final moisture content of high temperature dried lamina was much lower than target moisture content and discoloration was more severe than anticipated. In a further study, it will be necessary to determine the optimal drying conditions, such as temperature, humidity, drying time, and top load restraint level, which could best control discoloration, warpage, and moisture content of the lamina, while minimizing fuel expense.

• Journal of Forest and Environmental Science
• /
• v.11 no.1
• /
• pp.50-60
• /
• 1995

This study was carried out to estimate drying schedules of Larix Leptolepis and Pinus koraiensis by oven-drying at $100^{\circ}C$ which aimed to elucidate the characteristics such as current moisture content, drying process. initial check, collapse, internal check and drying rate during drying following each board thickness (2, 3. 4, 5, 6cm). the results were summerized as follows; Current moisture content of each board showed a rapid drying curve with the decrease of board thickness. At 20% moisture content, the drying rate of Larix leptolepis was higher than that of Pinus koraiensis and the drying rate of boards was lower with the increase of board thickness. From the estimated drying schedules. the initial conditions of drying of Larix leptolepis had to be milder than those of Pinus koraiensis and the boards thickness of 5cm, 6cm had to be most mild conditions.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.99-99
• /
• 2017

국내 콩의 소비량은 계속적으로 증가하고 있다. 재배 면적은 1995년 10,000ha에서 2013년 8,000ha까지 계속적으로 감소하였으며, 수입은 2009년 644.9백만 달러에서 2013년 883.3백만 달러까지 계속적인 증가 추세에 있다. 건조는 품질 손상을 최소화 및 수분을 제거하는 공정이다. 모든 곡물에는 건조 조건에 따라서 품질이 크게 변화하며, 건조 과정을 해석하여 해당 곡물의 적정 건조 조건을 구명하여 품질을 유지하는 위해서는 중요하다(Keum, 등 1977). 얇은 두께의 곡물층을 단층으로 하여 건조속도 및 건조공기의 조건을 나타내는 것을 박층(Thin layer)건조모델이라 한다. 박층건조모델을 계속적으로 쌓은 모델을 후층(Deep layer)모델이라 하며, 건조기 개발 및 건조조건 구명에 가장 기본이 된다(Basunia and Abe, 1998). 그러나 해외에서 만들어진 콩 박층건조 모델은 국내의 검은콩과 물성이 상이하여 건조조건이 다르게 설정 되어야 한다. 따라서, 본 연구목적은 건조온도 2수준, 상대습도 3수준에 대하여 검은 콩의 건조속도 측정하고, 곡물건조방정식으로 많이 이용되고 있는 4개의 건조방정식에 대하여 모델 적합성을 검정하여 검은콩 건조에 적합한 박층건조모델 결정하는데 있다. 공시재료는 2015년 강원도지역에서 생산된 검은콩을 실험에 사용하였으며, 초기 함수율은 14.7%,w.b.였다. 박층 건조공기 조성은 공기조화장치(MTH4100, SANYO, UK)를 사용하여 조성하였으며, 송풍기에 의해 공기충만실을 통과하여 건조 층을 통과하도록 구성하였다. 목표 평형함수율에 도달하면 실험을 종료하였다. 건조 층의 초기중량 및 경시적 변화는 전자저울(GF-4000, AND, Japan)을 이용하여 10분 간격 측정하여 저장하였다. 적정 박층건조모델을 결정하기 위하여 기존의 곡물건조방정식 중 널리 사용되고 있는 4개(Lewis, 1921; Page, 1949; Thompson, 1967; Moisture diffusion, 1975)의 건조모델을 이용하여 비교 검증하였다. 건조 초기 2시간 까지는 급격히 감소하다가 건조속도에 영향을 미치는 반건조시간(MR=0.5) 이후에는 완만하게 건조되는 것으로 나타났고 건조조건으로 건조온도 및 상대습도 모두의 영향이 미치는 것으로 나타났다. 4가지 건조 모델과 비교한 결과 Thompson 모델이 전체 건조 영역에서 비교적 잘 일치하였다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.4
• /
• pp.345-350
• /
• 1991

Rough rice samples of Chucheongbyeo, Bongkwangbyeo and Hwaseongbyeo were collected by the National Agricultural Products Inspection Office. Drying methods of rough rice were sun drying and forced ventilation drying by an oven dryer and temperature of the oven dryer was set to 43, 60, 70, or 8$0^{\circ}C$. Moisture content of samples was reduced from ca. 20% to 15% at the end of drying, and additionally to 12.5 % for the drying at 8$0^{\circ}C$. Characteristics related to rice grain quality, milling recovery, ratio of broken and cracked rices, percentage of germination, and sensory scores of the cooked rices were evaluated. Yielding percentage of brown rice and polished rice remarkably decreased by drying at 8$0^{\circ}C$. Percentages of cracked rice and broken rice were within the criterion of the second grade government brown rice (20%) only in the sun dried and the rices dried at 43$^{\circ}C$, on the basis of damaged rice, opaque kernel rice and colored rice. Broken rice percentage of the polished rice was within the criterion for the standard of government rice (5%) in the sun dried and the rices dried at 43$^{\circ}C$. Germination percentage of rough rice was higher than 80% in sun drying and drying at 43$^{\circ}C$, but remarkably decreased by drying rice at 6$0^{\circ}C$ and over. Sensory palatability of the cooked rice decreased with increase in drying temperature. The present governmental method of judging rough rice on the basis of moisture content and appearance of the rough rice appears to be improved to include the ratio of broken and cracked rices.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.2
• /
• pp.27-30
• /
• 2009

Purpose: Transmittance at UV-visible spectra range was measured to confirm the effect of wet/dry state of commercially available SCL on human eyes. Method: Commercially available five SCLs fabricated by different materials were selected to measure optical properties according to humidity. Results: A relatively high transmittance above about 80% in the visible spectra range of the SCLs were observed. In the UV spectra range, the wet samples showed higher transmittance than those dried except an unusual case. Conclusions: All the samples having a high optical properties in the visible spectra range exhibit a high transmittance in the UV region. Further research will be needed to develop new materials having a sharp absorption edge in the UV spectra range.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.349-356
• /
• 2009

Logs with average diameters of 20~30 cm were dried with microwave to investigate microwave drying characteristic of log and determine the optimal drying conditions. Microwave dryer with output of 20 kW was controlled with respect to the temperature of log during drying. Japanese red pine logs with average diameter of 281.9 mm were dried safely by microwave to below moisture content of 20% within 48 hours. Chinese toon logs showed serious surface checks during microwave drying. Higher drying rates were found with higher initial moisture content.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.11-16
• /
• 2007

This study was carried out to investigate the effect of Vapor-dam treatment on drying drying rates, prevention of checks and V-shaped split during air circulating oven drying bamboo (Phyllostachys pubescens Mazel et Z) tube. It was shown that the drying time from green to around 7~8 % of moisture content was required less as drying schedule was more severe, and distinctly dominated by the drying rate during the initial drying stage. Area shrinkages in cross section and thickness shrinkages measured during air circulating oven drying test were very large. Surface checks and V-shaped splits were occurred in untreated samples just after the beginning of drying, while sixty seven percentages of all the Vapor-dam treated samples could be produced without drying defects. The V-shaped splits occurred in the Vapor-dam treated samples were influenced more by the sealing of the vapor evaporation through the cross section than drying schedule.