• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.492-498
• /
• 2021

In this paper, the electromagnetic wave transmittance of the reinforced concrete structure wall was analyzed using the performance measurement system of electromagnetic wave shielding. Recently, electromagnetic wave shielding technologies on the reinforced concrete wall conditions have been studied, and the shielding effectiveness have been tested on unit cell size. However, the unit cell size tests have problems on that the measurement range for shielding performance is insufficient and it is difficult to reflect the real conditions of the concrete wall. Therefore, we constructed a shielding performance measurement system using a large sample of 2.2m × 2.2m like a real wall. To verify the measurement system, general reinforced concrete test samples were selected, and real shielding performance measurements and numerical analysis were proceeded. Test and numerical analysis results showed similar tendencies in the evaluation frequency range of 75MHz to 2GHz. Thus we validated the effectiveness of this shielding performance measurement system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.163-170
• /
• 2022

The present study investigates NO_x-removal and sound-absorption performances of photocatalytic porous concrete prepared by various TiO₂ application methods. Photocatalytic porous concrete samples were prepared by one of the following: 1) mechanically mixing TiO₂ during casting; 2) mixing bottom ash aggregate pretreated with TiO₂ during casting; and 3) spraying TiO₂ solution to the normally fabricated porous concrete. The test results indicated that the mechanical mixing of TiO₂ decreased the compressive strength as the added TiO₂ content increased. The use of pretreated bottom ash aggregate reduced the porosity, yet the compressive strength of the concrete was similar to that measured from the former method. Porous concrete samples sprayed with the TiO₂ solution exhibited enhanced compressive strength, while the porosity was analogous to those measured from other methods. The NO_x-removal performance was the highest in the samples sprayed with the TiO₂ solution, followed by the samples using pretreated bottom ash aggregate and mechanically mixed TiO₂. The samples with mechanically mixed TiO₂ identified a relationship between soundabsorption performance and porosity. However, no particular tendency was observable in the samples with other TiO₂ application methods.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.703-708
• /
• 2006

In the United States and Japan ITS device performance test-beds have been widely developed to enhance the reliability of traffic information and to expedite the standardization of components for securing the compatibility of device. In this study the selection criteria for developing ITS device performance test-bed are investigated by analyzing the cases and studies of overseas. Based on the criteria, a test-bed is developed and test-run. The importance of developing ITS device performance test-bed was identified as the result of reviewing the test run of each selection.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.402-410
• /
• 2022

The present study introduces a calibration method of the CSC model implemented in the LS-DYNA program for considering the material properties of ultra-high performance concrete(UHPC). Based on previous experimental studies, various parameters, which constitute three shear failure surfaces, pressure-volumetric strain curve, fracture energy, dynamic increase factor(DIF), and so on, are modified. Then, the proposed calibration method is verified by comparing the numerical result with the experimental data through the single element analysis. In addition, based on the established finite element models, the applicability of the calibrated CSC model is examined for UHPC structures subjected to impact and blast loadings.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2020.10a
• /
• pp.65-65
• /
• 2020

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2020.10a
• /
• pp.64-64
• /
• 2020

• 전기의세계
• /
• v.39 no.11
• /
• pp.37-44
• /
• 1990

원자력발전소의 건설은 막대한 비용과 시간이 소요되는 기한산업이므로 발전소의 수지선정, 설계, 제작, 건설에 이르는 건설단계에서는 철처한 안전대책, 품질관리 및 검사확인을 체계적으로 하는 것이 완전확보의 관건이 되며 운전단계에서는 절차주수와 성능유지가 가장 중요한 요소이다. 본고에서는 이러한 안전대책 현황을 포함하여 현재 진행되고 있는 개선노력을 기술하였다.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.735-740
• /
• 2022

The construction is the industry with the highest fatalities, and the fatalities has not decreased despite various institutional improvements. Accordingly, real-time safety management by applying artificial intelligence (AI) to CCTV images is emerging. Although some research on worker detection by applying AI to images of construction sites is being conducted, there are limitations in performance expression due to problems such as complex background due to the nature of the construction industry. In this study, the YOLO model and the OpenPose model were fused to improve the performance of worker detection and posture estimation to improve the detection performance of workers in various complex conditions. This is expected to be highly useful in terms of unsafe behavior and health management of workers in the future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.58-62
• /
• 2017

우리나라는 하상계수가 큰 하천의 특성 때문에 년 중 일정한 하천수위를 유지하기 어렵다. 더욱이 지류하천의 중 상류는 갈수기에는 건천화가 발생하곤 하며, 홍수기에는 빠른 유속으로 하류의 홍수위를 상승시키곤 한다. 따라서 지류하천 중 상류에는 수위조절 기능을 가지는 가동보를 설치하여 저류와 분배기능을 부여하고, 수재해 예방에 활용할 필요가 있다. 본 연구에서는 부력 승강식 가동보에 의한 수위자동조절 효과를 금강 지류인 치성천의 중 상류를 대상으로 수문학적 홍수추적 방법을 이용하여 분석하고, 성능구현을 위한 조건들을 검토하였다. 부력 승강식 가동보는 저류와 자동방류 기능으로 홍수기에는 하류의 홍수위 완화에 효과적이었으며, 다단으로 연속 배치할수록 효과는 향상되는 것으로 분석되었다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.63-64
• /
• 2022

Inter-floor noise in an apartment building is a serious problem that causes conflicts between tenants. Accordingly, there are various attempts to solve this problem, but it is not easy to find a clear solution. Therefore, in this study, a soundproofing material between floors was developed that can improve the sagging that occurs after construction. And as a result of testing the developed interlayer soundproofing material, both light weight and weight were grade 1. And it was analyzed that maintenance performance could be improved with integrated structural characteristics.