• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.5
• /
• pp.1-8
• /
• 2005

Daylight responsive dimming systems have been used to save the energy in office buildings. It is needed to consider a configuration of photosensor shape for efficient management of daylight responsive dimming systems. The configuration of optimal photosensor shape must be able to measure the exact luminous flux without changing of setting positions corresponding to the changes of room situations. On this occasion optimal photosensor shape must be designed with configuration of a proper photosensor spatial distribution and location for the daylight responsive dimming systems.

• 건축구조
• /
• v.12 no.4
• /
• pp.62-63
• /
• 2005

• Computational Structural Engineering
• /
• v.25 no.1
• /
• pp.8-12
• /
• 2012

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.6
• /
• pp.67-74
• /
• 2010

Because of the difference between the actual and computed eccentricity of buildings, symmetrical buildings will be affected by torsion. In provisions, accidental eccentricity is intended to cover the effect of several factors, such as unfavorable distributions of dead- and live-load masses and the rotational component of ground motion about a vertical axis. The torsional amplification factor is introduced to reduce the vulnerability of torsionally imbalanced buildings. The effect of the torsional amplification factor is observed for a symmetric rectangular building with various aspect ratios, where the seismic-force-resisting elements are positioned at a variable distance from the geometrical center in each direction. For verifying the torsional amplification factor in provisions, nonlinear reinforced concrete models with various eccentricities and aspect ratios are used in rock. The difference between the maximum displacements of the flexible edge obtained between using nonlinear static and time-history analysis is very small but the difference between the maximum torsional angles is large.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.923-929
• /
• 2008

Due to the increasing need for 3D spatial data, modeling of topography and artificial structures plays an important role in three-dimensional Urban Analysis. This study suggests a methodology for solving the problem of calculation for the extraction of building boundary, minimizing the user's intervention, and automatically extracting building boundary, using the LIDAR data. The methodology suggested in this study is characterized by combining the merits of the point-based process and the image-based process. The procedures for extracting building boundary are three steps: 1) LIDAR point data are interpolated to extract approximately building region. 2) LIDAR point data are triangulated in each individual building area. 3) Extracted boundary of each building is then simplified in consideration of its area, minimum length of building.The performance of the developed methodology is evaluated using real LIDAR data. Through the experiment, the extracted building boundaries are compared with digital map.

• Spatial Information Research
• /
• v.21 no.3
• /
• pp.79-87
• /
• 2013

The purpose of this study focuses on the development of the lightweight BIM shape format(LBSF) structure to present the large volume BIM geometry object based on GIS as the viewpoint of the building facility management. Recently, the BIM-based facility management with GIS is researching with the purpose of the urban facility management etc. To implement these use-cases, the BIM geometry objects can be visualized based on urban level with GIS effectively. To do this, the lightweight BIM shape format is designed with the considerations and the prototype for the pilot test is implemented. In the pilot test phase, after developing the IFC file and LBSF file about the model data of the three areas, the performance with the data volume, the screen loading time etc was compared.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.251-254
• /
• 2010

본 연구에서는 세계 각지의 초고층 건축물 사례 55개를 대상으로 초고층 형상의 비정형성을 대표적 유형에 따라 분류하고 해당 유형에 적용된 구조시스템을 조사함으로써 건축물의 비정형 형상과 이를 구현하기 위해 적용된 구조시스템간의 상관관계를 분석하였다. 대표적인 비정형 형상을 5개 유형으로 분류하고 구조시스템의 적용빈도를 조사한 결과, 적용 사례가 많은 Extrusions와 Tapers 형태에서는 적용된 구조시스템과의 유의미한 상관관계를 파악할 수 있었으며, 적용 사례가 많지 않은 Twisters, Tilted, Free Form 형태에서는 구조시스템의 상대적 적용 경향을 파악할 수 있었다. 본 연구의 결과는 비정형 형상에 적합한 구조시스템 대안의 우선순위를 설정하고 구조시스템 생성을 위해 형상으로부터 추출해내야 할 초기 파라미터를 선정하는데 활용할 수 있을 것으로 기대된다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.484-487
• /
• 2010

본 논문에서는 BIM(Building Information Modeling)의 핵심기술인 파라메트릭 기술을 기반으로 하여 철근콘크리트 구조물의 기둥부재 주철근 자동배근시스템을 구축함으로써 기존 프로그램에서 사용자가 직접 입력해야하는 변수의 수를 최소화하고 사용성과 정확성을 높이는 것을 목적으로 한다. 기존 철근배근 형상 자동 모델링에서 기둥철근의 자동 모델링은 기둥단면이 변하는 부분에서의 철근 배근과 정착 및 이음길이를 고려하지 않고 있다. 만약 고려하더라도 이용자가 직접 입력하는 방식이기 때문에 규모가 큰 건물일 경우 방대한 정보의 처리 미숙으로 인해 정확한 모델링을 기대하기 어려운 실정이다. 본 연구에서는 기둥 부재에 대하여 대상 건물을 선정하고 구조해석 모델링을 구축한 후 구조해석 결과 데이터베이스를 추출하여 얻은 정보와 건축구조설계기준에 따른 정착 및 이음 길이 산정에 관한 알고리즘을 구축하여 철근배근 형상 자동화 모듈에 적용하여 배근 자동 설계 및 자동 형상화 모듈을 생성하였다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.136-150
• /
• 2008

Many studies have been carried out for automatic extraction of building by LiDAR data or airphoto. Combining the benefits of 3D location information data and shape information data of image can improve the accuracy. So, in this research building recognition algorithm based on contour was used to improve accuracy of building recognition by LiDAR data and elaborate building boundary recognition by airphoto. Building recognition algorithm based on contour can generate building boundary and roof structure information. Also it shows better accuracy of building detection than the existing recognition methods based on TIN or NDSM. Out of creating buffers in regular size on the building boundary which is presumed by contour, this research limits the boundary area of airphoto and elaborate building boundary to fit into edge of airphoto by double active contour. From the result of this research, 3D building boundary will be able to be detected by optimal matching on the constant range of extracted boundary in the future.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.279-282
• /
• 2010

최근 단일 고해상도 위성영상과 건물과 지형에 대한 정보를 가지고 있는 수치지도(DEM:Digital Elevation Model)를 이용하여 3차원 영상으로 구축하는 연구가 많이 이루어지고 있다. 3차원영상을 구축하기 위해서는 건물과 지형의 위치, 크기, 형상에 관한 정보가 필요하나 위성영상만으로는 구하기가 어려워 수치지도를 활용한다. 본 논문에서는 수치지도를 이용하여 3차원 건물과 지형의 고도 정보를 추출하고, 위성영상과 Snake 모델을 이용하여 반자동으로 추가적인 건물 높이와 바닥면에 대한 정보를 추출하여, 3차원 영상을 생성 하는 방법을 제안한다.