• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.5
• /
• pp.371-380
• /
• 2017

The risk-targeted seismic design concept was first included in ASCE/SEI 7-10 to address problems related to the uniform-hazard based seismic concept that has been constructed without explicitly considering probabilistic uncertainties in the collapse capacities of structures. However, this concept is not yet reflected to the current Korean building code(KBC) because of insufficient strong earthquake data occurred at the Korean peninsula and little information on the collapse capacities of structures. This study evaluates the risk-targeted seismic performance of steel ordinary concentrically braced frames(OCBFs). To do this, the collapse capacities of prototype steel OCBFs are assessed with various analysis parameters including building locations, building heights and soil conditions. The seismic hazard curves are developed using an empirical spectral shape prediction model that is capable of reflecting the characteristics of earthquake records. The collapse probabilities of the prototype steel OCBFs located at the Korean major cities are then evaluated using the risk integral concept. As a result, analysis parameters considerably influence the collapse probabilities of steel OCBFs. The collapse probabilities of taller steel OCBFs exceed the target seismic risk of 1 percent in 50 years, which the introduction of the height limitation of steel OCBFs into the future KBC should be considered.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.1 s.71
• /
• pp.93-103
• /
• 2006

It is absolutely essential that safety assessment of the containment buildings during service life because containment buildings are last barrier to protect radioactive substance due to the accidents. Therefore, this study describes an enhanced degenerated shell finite element(FE) which has been developed for nonlinear FE analysis of reinforced concrete(RC) containment buildings with elasto-plastic material model. For the purpose of the material nonlinear analysis, Drucker-Prager failure criteria is adapted in compression region and material parameters which determine the shape of the failure envelop are derived from biaxial stress tests. Reissner-Mindlin(RM) assumptions are adopted to develop the degenerated shell FE so that transverse shear deformation effects is considered. However, it is found that there are serious defects such as locking phenomena in RM degenerated shell FE since the stiffness matrix has been overestimated in some situations. Therefore, shell formulation is provided in this paper with emphasis on the terms related to the stiffness matrix based on assumed strain method. Finally, the performance of the present shell element to analysis RC containment buildings is tested and demonstrated with several numerical examples. From the numerical tests, the present results show a good agreement with experimental data or other numerical results.

• Archives of design research
• /
• v.15 no.4
• /
• pp.263-274
• /
• 2002

This study aims to analyze the image of long-span structures. For the intention, it analyzes the relationship between images and physical attributions of elements such as materials, stresses, configurations, compositions and shapes of structures. The image of structures can represent following 5 factors; friendly-unfriendly, strong-weak, dynamic-calm, superior-inferior, and regular-irregular. The friendly-unfriendly in the image of structure mostly determines on a finished material and partly with a structural shape. The strong-weak in the image of structure determines on configuration of the structural members. The dynamic-calm in the image of structure determines on the structural shape. Hence the structure has dynamic forms when it seems to be open and sharp, namely when it receives the flow of forces in the structural shape, and it has a (-) gauss curved rate or an diagonal appearance. The superior-inferior in the image of structure determines on composition of structural elements. The structure seems to be superior is contributed not simply to support load but positively to create design as a tectonic element. From now on, this study can provide the useful information on the long-span structure design through the more appropriate analysis of the image.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.2
• /
• pp.14-19
• /
• 2010

Theories for advanced composite structures are too difficult for such design engineers for construction and some simple but accurate enough methods are necessary. The senior author has reported that some laminate orientations have decreasing values of $D_{16}$, $B_{16}$, $D_{26}$ and $B_{26}$ stiffnesses as the ply number increases. For such plates, the fiber orientations given above behave as specially orthotropic plates and simple formulas developed by the senior author. Most of the bridge and building slabs on girders have large aspect ratios. For such cases further simplification is possible by neglecting the effect of the longitudinal moment terms(Mx) on the relevant partial differential equations of equilibrium. In this paper. the influence of the aspect ratio on the natural frequency of the composite laminated plates is studied and it is concluded that the method used is sufficiently accurate for engineering purposes.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.1
• /
• pp.53-60
• /
• 2001

Theories for advanced composite structures are too difficult for such design engineers for construction and some simple but accurate enough methods are necessary. The senior author has reported that some laminate orientations have decreasing values of $D_{16}$, $B_{16}$, $D_{26}$ and $B_{26}$ stiffnesses as the ply number increases. For such plates the fiber orientations given above behave as specially orthotropic plates and simple formulas developed by the senior author. Most of the bidge and building slabs on girders have large aspect ratios For such cases frurther simplification is possible by neglecting the effect of the longitudinal moment terms(Mx) on the relevant partial differential equationsof equilibrium In this paper, the result of the study on the subject problem is presented.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.53-56
• /
• 2008

In this investigation, results of laboratory tests on six reinforce concrete flat plate interior connections with elongated rectangular column support which has been used widely in tall residential buildings are presented. The purpose of this study is to evaluate an effect of column aspect ratio(${\beta}$c=$c_1/c_2$) on the hysteretic behavior under earthquake type loading. The aspect ratio of column section was taken as 0.33${\sim}$3($c_1/c_2$=1/3, 1/1, 3/1). Other design parameters such as flexural reinforcement ratio of slab and concrete strength was kept constant as ${\rho}$=1.0%, 1.5% and $f){ck}$=40MPa, respectively. Gravity shear load($V_g$) was applied by 30 percents of nominal vertical shear strength(0.3$V_o$) of the specimen. Experimental observations on punching failure pattern, peak lateral-load and story drift ratio at punching failure, and stiffness degradation were achieved and discussed in accordance with different column aspect ratio.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.293-293
• /
• 2019

최근 도심지 침수예방을 위해 구조적 비구조적인 대책 등이 수행되어 왔으나, 도심지의 국지성 호우의 발생빈도가 증가함에 따라 단시간의 도심지 침수예측의 중요성이 다시 대두되고 있다. 이에 도심지 침수 예측을 위해서는 수치모의 프로그램을 사용한 연구가 진행되어 왔으나, 국지성 호우에 의한 침수를 막을 만킁의 실시간 위험예측은 아직까지 힘든 실정이다. 한편 해양재난의 침수를 예방하기 위해서 국립재난안전연구원(2017)에서는 과학적 보간법을 적용한 침수예측 모형인 SIND(Scientific Interpolation for Natural Disaster) Model을 개발한 바 있다. 따라서 본 연구에서는 SIND Model을 도심지 침수예측에 적용하여 집중호우와 같은 단기간의 침수를 예방하고자 한다. SIND Model은 기 구축된 침수예상도를 활용하여 모든 시나리오에 대한 침수 위험도 등급을 실시간으로 평가하는 모형이다. 국토부에서 제공하는 국가홍수위험지도와 내수침수지도를 활용하였고, SIND Model은 Comsol Multyphisic를 활용하여 침수예측지도를 생성하였다. 기존에 해양재난 예측을 위해 사용하였던 Risk Grade 방정식에 시간 항(time term)과 도심지의 최초 침수 발생위치에 생성 항(source term)을 추가하여 도심지 침수특성을 반영하였다. 결과를 평가하기 위하여 CRITIC(CRiteria Importance Through Intercriteria Correlation) 방법을 활용한 형상유사도를 산출하였다. 그 결과, 기 구축된 홍수위험지도와 형상유사도는 전체 구역 중 80%의 구역이 0.8 이상의 값을 나타내었다. 20%의 구역에서는 복잡한 도심지의 건물, 구조물 등의 침수특성을 반영하지 못하여 형상유사도가 낮게 평가된 것으로 판단되며, 향후 위험도 예측을 위해 배수시스템 등의 영향인자를 고려한다면 위험도 등급 예측의 정확도를 높일 수 있을 것이라 기대된다.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.2
• /
• pp.130-141
• /
• 2012

This study examines the characteristics of landscape elements and the reappearance techniques of traditional landscape image in Chinatown of the Shanghai Street in Busan, Korea. The subjects of the study are commercial buildings owned by Chinese residents, commercial buildings' naming design and environmental sculptures in the Shanghai Street. The results are as follows: First, the design methods of the front side of commercial buildings were classified into two parts: facede design of buildings and signboard design. The design form of the buildings' facades were classified into five types, there are: emphasis type on Chinese characters' signboard, addition type on decorative signboard, introduction type of traditional patterns, imitation type of traditional architectures and modern architectures' modes. The signs of chinese commercial buildings were observed mostly as having a traditional Chinese font in yellow/white on a red background. It has been found that this style was the most popular method of sign design. Secondly, The commercial buildings' naming design was analyzed into design methods and meanings. Design methods were classified into three types: a combination of meaning and place, a combination of season and atmosphere and tourist attractions. The meaning of the commercial buildings' names was divided into three kinds: the wishes of the prosperity, elegant type and the appropriation of local attractions. Thirdly, the environmental sculptures of Shanghai Street were found to have been influenced by both through out Chinese culture with mixed Korean culture. Finally, as for characteristics of landscape elements, we found three reappearance techniques - addition, replacement, juxtaposition. The technique of addition is added new face to the base map by just two methods - extending and overlapping area. Replacement is created new faces from base map by the action of replacing, it has three types - local replacement, package replacement, successive replacement. Juxtaposition is the fact of two or more things placed together with contrasting effect, it also has three types - the same kind juxtaposition, a different kind juxtaposition, topological juxtaposition. This study is the basic research which is analyzing the landscape design in chinatown. But the research only on Shanghai Street may have some limits in scope. It is considered an necessary study to add, which is about chinatown in other city such as Incheon, Jeonju. Then it is expected that the results of this study can be used for the basic data of the landscape plans, that municipalities are actively progressing their respective development projects of Chinatown.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.557-560
• /
• 2009

본 연구에서는 건물의 규모, 용도 및 형식 등에 따라 다양하게 요구되는 성능에 대응할 수 있도록 하기 위한 성능설계에 대한 개념을 검증하고, 강구조 건축물의 특성을 고려한 성능레벨 및 성능한계에 대한 분류방법을 제안하였다. 또한 강구조 건축물의 경우 강도가 높고 경량인 특성에 의해 다른 구조형식에서는 크게 고려하지 않아도 되는 거주성능 및 진동특성을 제어하여 기능을 유지하기 위한 성능레벨을 설정하여 구조물이 항복하기 전의 성능레벨을 기능유지 및 무손상의 2단계로 제시하고, 이 때의 한계치를 기능한계 및 손상한계로 구분하였다. 강구조 건축물의 손상한계를 정의하기 위해 강구조 건축물의 설계 예를 이용하여 항복 층간변형각을 조사하였다. 그 결과 구조물의 손상발생을 억제할 수 있는 손상한계를 규정하기 위해 주로 사용하고 있는 층간변형각은 구조형식 및 설계방법에 따라 편차가 크게 나타나고 있으므로 손상한계치의 층간변형각을 임의로 설정하는 것은 매우 어려우며 향후 이에 대한 해석적, 실험적 검증이 필요할 것으로 판단되었다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.200-204
• /
• 2009

구조물의 건전도를 평가하기 위하여 계측된 데이터로부터 구조물의 동특성 변화를 분석하여 손상정도를 추정하는 방법이 많이 사용되고 있다. 최근, 다점 측정된 가속도 데이터로부터 구조물의 고유진동수 및 모드형상을 추출하고 이를 초기값과 비교하여 손상탐지를 실시함으로써 손상위치 및 손상정도를 추정하는 기법이 활발히 연구되고 있다. 그러나 이러한 방법을 실제 적용하기 위해서는 계측시스템 구축에 많은 비용이 소요되며, 손상탐지를 위한 해석과정이 복잡하기 때문에 실시간에 가깝게 유용한 정보를 거주자에게 제공하는데 한계가 있다. 따라서 본 연구에서는 실용적인 계측유지관리 시스템을 구축할 수 있도록 구조물의 손상도에 따른 동적특성의 변화를 사전에 예측하여 실제 계측된 동적특성에 대한 관리 한계치를 제공하는 방안을 제시하고자 한다.