• Korean Journal of Construction Engineering and Management
• /
• v.13 no.3
• /
• pp.43-55
• /
• 2012

A methodology for BIM Quality Assurance in the construction industry is becoming increasingly an important issue to determine the reliability of BIM. However, the quality assurance of BIM is currently limited to check 3D models, such as clash detection and space layout while verification methods for disciplinary BIM results from structural engineering, mechanical engineering, and estimation do not exist yet. Particularly, in the BIM-based estimation mathematical equations to take off quantities are not clearly exposed so that the results are not quite accepted at practices. With the concept of reliability engineering defined in the manufacturing industry to improve reliability of outcomes of BIM-based quantity take-off, impacting factors that affect reliability of BIM-based quantity take-off were derived. It was found that the factors also include the modeling method and the features of a BIM tool. Therefore, this research aims to propose modeling and verification methods to improve reliability of BIM-based quantity take-off through the pilot test that was performed with commercial BIM tools and IFC-based BIM data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.321-321
• /
• 2022

유역 모델링은 유역에 강우의 유출 과정을 재현할 수 있는 과정이다. 과거 유역 모델링은 1차원 수준에서 유출과정을 모의하는데 그쳤으나, 기술이 발전함에 있어 입력하는 매개변수 수가 증가함에 따라 모의값의 신뢰성이 높아지고 있다. 본 연구에서는 다양한 매개변수 중 공간매개변수로써 널리 활용되고 있는 수치표고모델의 신뢰성과 범용성을 확인하고자 한다. 유역모델링 연구에 있어, 수치표고모델 정확성은 결과값의 신뢰성을 좌우하는 중요한 인자 중 하나이다. 수치표고모델이란 실제 지형이 나타내는 표고 정보를 수치화 하여 격자 안에 담은 형태의 파일로 대표적으로 DEM(Digital Elevation Models)과 DSM(Digital Surface Models)로 나눌 수 있다 DEM의 경우 해당 지형의 고도정보만을 담고있으며, DSM은 지표면 상의 나무, 건물 등 포함한 지표면의 고도를 담고 있다. 현재 NASA에서는 전 지구의 30m격자 크기로 SRTM-DSM을 제공하고 있으며, 우리나라 국토지리정보원에서도 90m 격자크기의 DEM을 제공하고 있다. 본 연구에서는 남한강 유역의 수치표고모델을 세 가지 Case로 나눠서 유출량 변화 검토를 진행하였다. 산지가 많은 남한강 유역의 10개의 소유역을 선정하였고, 다음과 같이 3개의 Case를 적용하였다. Case1, DEM 자료를 입력했을 경우, Case2, DSM 자료를 입력했을 경우, Case3 DSM+DEM 자료를 입력했을 경우, 각 Case에 대해 유출량을 산정하였고, 그 결과값을 분석하였다. 해당 유역에 세 가지 Case 모두 유출량의 변화량의 큰 차이를 보이지 않았으며, 공간매개변수 적용에 있어 타당성을 보였다. 따라서 본 연구는 인공위성을 통해 산출된 수치표고모델의 신뢰성을 확인 하였고, 활용가능성을 검토 하였다. 이에 따라 향후 연구에 수치표고모델 적용에 있어 미계측유역에도 활용가능한 연구로 기여할 수 있을 것으로 판단된다.

• Korean Institute of Interior Design Journal
• /
• v.25 no.6
• /
• pp.70-78
• /
• 2016

This paper aims to describe a case study of parametric interior design based on BIM (Building Information Modeling). As the practical use of BIM-based design grows, its influence expands into the field of interior architecture design. BIM makes possible to check various design plan, reach decision making in an effective way, and change design plan in an efficient method. Therefore, BIM is also promising field in interior architecture design. However, compared to other fields in architecture, engineering, and construction (AEC) industry, there have been less research and projects on BIM in the field of interior architecture. For increasing the feasibility of adapting BIM in interior architecture design, this paper describes a case study-projecting images for designing interior panels using parametric modeling. This process needs elaborate, delicate, and precise steps for harmonious output. For continuous use of building, users look forward to the design which variable and changeable according to user's preference and environment. Therefore, demand for parametric design in the interior design part such as panel pattern design for various decoration is growing. Treated process in this paper deals with an advanced phase which much effective in decreasing time consumption and useless part of process. Finally, this paper suggests the possibility of using BIM in the interior design process and field where BIM can be applied.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2012.05a
• /
• pp.316-317
• /
• 2012

문화 유적에 대한 관심은 외부환경으로부터 이를 보존하려는 수동적인 노력과 함께 문화 유적에 대한 시대상황을 보다 잘 이해할 수 있도록, 역사적 정보제공을 위한 기술적 노력이 필요하다. 더욱이 이미 사라져 문헌에만 남아 있는 이야기나 역사적 가설을 그 때의 시대적 상황에 맞게 재구성하여 사실감 있는 정보를 전달하는 기술이 필요하다. 이러한 맥락에서 본 연구는 옛 백제의 마지막 도읍지인 사비성을 3차원으로 복원하여 가상공간을 재현하고 인터렉티브 전시 콘텐츠를 개발하는 것을 궁극의 목표한다. 먼저, 고증을 통해 그 시대의 건축양식을 이해하고 가상공간 구성에 필요한 건물을 모델링한다. 사실적 표현을 통해서 사용자의 임장감을 높이면서도 사용자와의 상호작용을 통해 시대적 상황이나 역사적 정보를 제공하는 것은 물론, 다양한 콘텐츠로의 활용가능성을 고려하여 전통건축을 3차원으로 복원한다.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.5
• /
• pp.3-11
• /
• 2015

This paper aims to review and discuss a graph-based approach for the representation and analysis of building circulation using BIM models. To propose this approach, the authors survey diverse researches and developments which are related to building circulation issues such as circulation requirements in Korea Building Act, spatial network analysis, as well as BIM applications. As the basis of this paper, UCN (Universal Circulation Network) is the main reference of the research, and the major goal of this paper is to extend the coverage of UCN with additional features we examined in the survey. In this paper we restructured two major perspectives on top of UCN: 1) finding major factors of graph-based circulation analysis based on UCN and 2) restructuring the UCN approach and others for adjusting to Korean Building Act. As a result of the further studies in this paper, two major additions have demonstrated in the article: 1) the most remote point-based circulation representation, and 2) virtual space-based circulation analysis.

• Journal of the Korea Society for Simulation
• /
• v.19 no.2
• /
• pp.1-8
• /
• 2010

With recent development of computer hardware and 3D graphic technique, a lot of people have concern for something to express as the 3D graphic that look the real environment. Because the request of users have increased, the 3D simulation is developed and popularized in the many field. In this paper, we design and implement the simulation system that humans evacuate a building fires using the 3D graphic techniques. In this paper, we use the A* algorithm to humans have the artificial intelligence at evacuating a building fires, calculate the evacuation speed of each human considering temperature damage and smoke damage. In this paper, we applied the real building to demonstrate the effect of proposed evacuation simulation. Experimental results showed that the evacuation speed is affected by the temperature condition and the smoke density.

• Geophysics and Geophysical Exploration
• /
• v.8 no.4
• /
• pp.251-261
• /
• 2005

The quality of MT (magnetotellurics) data highly depends on the level of artificial noise form industrial sources. We have conducted the feasibility study of MT noise modelling using digital spatial data and spatial modelling through the comparison between the predicted and the measured MT noises. A simple noise model predicting the intensity of electromagnetic field radiated from the latent noise sources, that is, the electric facilities in the building, road and high-voltage powerline, is developed in consideration of the propagation property of electromagnetic waves. From the analysis of correlation between the predicted and the measured noise power, the correlation coefficients of electric field are higher than those of magnetic field in whole frequency band. The magnetic field component has the high correlation in the narrow band near 60 Hz only. The spatial noise modelling proposed in this study would provide some useful informations for the MT surveys in the noisy environment like urban area.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.4
• /
• pp.313-322
• /
• 2022

The number of architects who adopt BIM(Building Information Modeling) as the design method are gradually increasing because of its productivity and efficiency. Climate Change and Global Warming lead to legislation of new energy regulations and strengthen existing ones. The current architectural design methods (2D CAD) take a lot of time and effort to verify energy codes and are hard to adjust according to the design changes. The purpose of this study is to show the effectiveness of the BIM in building envelop energy modeling of the housing project. In the process of design method change, We could contribute to increasing productivity and efficiency in building energy verification through BIM because the updated value could be calculated simultaneously without information omission or recalculation process. The procedure for the study is as follows. Using BIM of the Goldin at Essex Crosing Housing Project by Revit 2011 as a case model, this study analyze the criteria for energy plan to conform to the energy code in NYC. The result value from the setting of the Revit model is compared with the reference value required by the NYC Energy Code. Finally, the data from BIM are entered into COMckeck, the energy verification program provided by U.S. Department of Energy, to check whether the building envelope energy performance conforms to NYC Energy Code.

• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.1
• /
• pp.55-61
• /
• 2017

The V-world, korean type spatial information open platform, provides various services to easily utilize 2D, 3D map and administrative information of the country. Among them, V-world 3D map service, modeled in individual building unit, require requests for each building model file and the draw calls for drawing models on the screen by the request. This causes a large number of model requests and draw calls to occur that increase the latency occurring during the transmission and conversion process between the central processing unit(CPU) and the graphic processing unit(GPU), which lead to the performance degradation of the 3D map service. In this paper, we propose a performance improvement plan to reduce the performance degradation of 3D map service caused by multiple model requests and draw calls. Therefore, we tried to reduce the number of requests and draw calls for the model file by applying a 3D tile model that combined multiple building models to single tile. In addition, we applied the quadtree algorithm to reduce the time required to load the model file by shortening the retrieval time of the model. This is expected to contribute to improving the performance of 3D map service of V-world.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.462-464
• /
• 2012

최근 건물 내 에너지 소비량의 30%를 점유하고 있는 조명 에너지 절감을 위해 자연광을 이용하여 인공조명의 의존도를 낮추고 에너지 사용을 최소화하기 위한 다양한 연구가 진행되고 있다. 이에 본 논문에서는 조명 에너지 소비 절감 및 재실자의 작업 능률 향상을 위해 조명시뮬레이션 소프트웨어인 Relux를 이용하여 소규모 사무 공간을 3D로 모델링하고, 이를 기준으로 시간대별 자연광의 유입량에 따라 조명장치를 점멸제어, 조광제어, 스텝제어의 다양한 제어방법을 적용하여 반복적인 시뮬레이션 과정을 통해 각 제어방법에 따른 에너지 절감률을 비교 및 분석하였다. 분석 결과 조광제어가 60.5%로 가장 높은 에너지 절감률을 보였다.