• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.91-105
• /
• 1992

For the analysis of multistory frames with sidesway, no adequate procedures can be found in the classical methods of structural analysis. Even well-known procedures such as the slope-deflection method and the moment distribution method may not be effective tools since those methods require a multiple of computational labor and/or yield results of approximate values. In this study, a direct method is developed and proposed for the analysis of multistory frames with sidesway, which is due to the lateral loads, asymmetry of the structure itself, or asymmetry of vertical loadings. The proposed method is to obtain simple forms of equations derived by a mathematical formulation of the moment distribution procedure combined with successive correction concept. Numerical illustrations show that the results obtained by the proposed method agree well with those by rigorous ones. Undoubtedly, this newly developed method can be applied more easily for the analysis of structural frames without joint translation as well as continuous beams.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.3
• /
• pp.186-189
• /
• 2003

This experiment was conducted to evaluate the contents of allylisothiocyanate and the change of hardness of the rhizome part of Wasabia japonica Matsum. by months after planting in water cultivation. No difference was found in plant height and leaf length at 10th and 15th months after planting, respectively. The rhizome part of wasabi was cut half and the dry weight was weighed. Dry weight was obtained as 17.3% and 21.6% from fresh lower and upper part of rhizome at 10th month after planting. At 15th month after planting, dry weight was obtained as 21.2% and 22.3% from fresh lower and upper part of rhizome. The contents of allylisothiocyanate were 0.047 mg/g and 0.633 mg/g at 10th and 15th month, respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.2
• /
• pp.199-208
• /
• 2001

The digital map in Korea has been producted and utilized independently according to scales such as 1:1,000, 1:5,000, and 1:25,000. Therefore, whenever we need to obtain the spatial data of other scales, we have to product the digital maps over and over again which it is time-consuming and ineconomic. To solve these problems, it has been accomplished many researches on map generalization to make digital maps in small scale from the master data of large scale. This paper aims to analyze the conversion characteristics of the large scale to the small scale by simplification of map generalization. For this purpose, it is proposed the algorithm for the simplification process of digital map and it is investigated the simplification characteristic of digital map through the experiment on the conversion of 1:5,000 scale into 1:25.000 scale. The results show that Area-Preservation algorithm indicates the good agreement with the original data in terms of the area and features of building layer compared to Douglas-Peucker algorithm and Reumann-Witkam algorithm.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.539-542
• /
• 2004

Nowadays, High-rise building becomes higher and bigger than ever. As a result, lots of construction materials are needed at the same times. Because of divided diverse process of construction, several different Processes concur simultaneously with complexity of procurement. So, effective construction material supply and lift-up are essential part of the spot. Especially, when ending part of construction, there are much conflict between finishing and equipment materials also problems of folding lift-up. The Purpose of this paper is suggesting better effective lift-up system through analysis of loading factors.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.1
• /
• pp.109-119
• /
• 2004

A design procedure for velocity-dependent supplemental dampers, such as viscous or viscoelastic dampers, required to meet the desired performance objectives was developed using displacement spectra. The amount of supplemental damping required to satisfy given performance limit state was obtained first from the nonlinear static procedure using displacement spectra, then dampers were appropriately distributed throughout the stories to realize the required damping. The proposed method was applied to multi-story steel frames, and the structures were analyzed by time history analysis to validate the accuracy of the design procedure. According to the analysis results the maximum displacements of the model structures retrofitted by the supplemental dampers turned out to be restrained well within the given target values.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.825-836
• /
• 2022

Micropiles can be used to support additional load in extended building structures. However, their use brings about a risk of exceeding the bearing capacity of existing piles. In this study, pre-compression was applied to distribute the load of an existing building to micropiles, and an indoor loading test was performed to confirm the structural applicability of a wedge-type anchorage device designed to improve its capacity. According to the test results, the maximum strain of the anchorage device was 0.63 times that of the yield strain, and the amount of slip generated at the time of anchorage was 0.11 mm, satisfying structural standards. In addition, using MIDAS GTS, a geotechnical finite element analysis software, the effect of the size of the pre-compression, the thickness of the soil layer, and the ground conditions around the tip on the reaction force of the existing piles and micropiles were analyzed. From the numerical analysis, as the size of the pre-compression load increased, the reaction force of the existing pile decreased, resulting in a reduction rate of up to 36 %. In addition, as the soil layer increased by 5 m, the reduction rate decreased by 4 %, and when the ground condition at the tip of the micropile was weathered rock, the reduction rate increased by 14 % compared with that of weathered soil.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.248-262
• /
• 1987

This experiment was conducted to study plant characteristics and dry matter production of several rice varieties. The results are summarized as follows. 1. Culm length was gradually shortened as varieties were improved and showed significant decrease in Japonica X Indica hybrids. 2. Panicle length seems to be shortened as varieties changed from group I to group III. However, varieties in group IV had longer panicle length in spite of shortening tendency in other groups. 3. Leaf blade length was decreased as varieties improved, but leaf blade width was increased. 4. Panicle exertion showed significant decrease as varieties improved. 5. Number of panicles per square meter among Japonica varieties was gradually increased and similar to the number of spikelets per panicle. Number of spikelets on Indica X Japonica hybrids were higher than Japonica varieties, whereas 1,000 kernel weight was slightly decreased. 6. Dry weight of leaf sheath and culm, and leaf blade was highest at the time of heading and the weight of panicle showed significant increase between 10 and 20 days after heading. 7. The maximum crop growth ratios of leaf blade, stem and panicles were attadined at the stage of heading, booting and milking, respectively. 8. The distribution ratio of dry matter was higher in leaf blade than in stem at the tillering stage. At the heading stage, the distribution ratio of dry matter was higher in order of culm, leaf blade and panicle. At the maturing stage, the ratio was higher in order of panicle, stem and laf blade. 9. Correlation coefficients among grain yield, harvest index, and biological yield were all significant and they were positive.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.4
• /
• pp.306-312
• /
• 2007

To investigate the effect of N fertigation on the growth, yield, and water and nitrogen use efficiencies during tomato cultivation, seedlings were transplanted in a sandy loam soil under plastic film house condition. 0, 88, 132, 176, $220\;kg\;ha^{-1}$ N rates, which correspond to 0 (NF0), 40 (NF40), 60 (NF60), 80 (NF80), 100% (NF100) N level of soil test-based N fertilization, were injected weekly through drip irrigation system for 15 weeks in N fertigation system, and the control (conventional N treatment) was installed for comparison. Herein, nitrogen was applied by top-dressing with 60% as a basal and 40% as additional fertilizer. There was little different in stem diameter growth among N fertigation treatments, but plant height and dry matter increased with increasing N fertigation rates as well as in N conventional treatment. Tomato yield was increased with increasing the number of marketable fruits in N fertigation treatments, and the fruit yield was maximized in NF 80 treatment ($176\;kg\;ha^{-1}$ N supply or $96.6\;mg\;L^{-1}$ N injection). Dry matter productivity and nitrogen uptake amount were significantly increased with increasing N fertigation rates. The ratio of fruits to the dry weight of whole plant was decreased with increasing N fertigation rates, but this ratio was $2.6{\sim}5.3%$ higher in N fertigation treatments than in the control. In addition, the ratios of nitrogen distributed toward fruits in N fertigation treatments were $3.7{\sim}21.7%$ higher than that of control. The apparent N recovery percentages showed significantly higher values as $71.8{\sim}102.3%$ in N fertigation treatments, compared to 45% in N conventional treatment. Water use efficiency was significantly increased by fertigation system with the maximum $361\;kg/ha\;cm^{-1}$ in NF 80, which is comparable to $324\;kg/ha\;cm^{-1}$ of the conventional treatment. Conclusively, N fertigation system was effective on increasing tomato productivity and nutrient efficiency as well as 20% reduction of N fertilization level.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.5
• /
• pp.655-661
• /
• 1995

This study was conducted to get basic information of dry matter production and agronomic characteristics for increasing grain ripening in rice cultivar with large grains. Three cultivars which have different grain size were used. Of the two large grain cultivars, SR7796-3-1-5-1-l(SR7796F$_{7}$) had long culm and SR11269-13-3-4-2(SR11269F$_{6}$) had short culm. On the other hand, Tamjinbyeo was recommended cultivar had medium size of grain and culm. LAI was highest in Tamjinbyeo, followed by the SR11269F$_{6}$ and SR7796F$_{7}$, LAI decrement was higher in large grain cultivars than that of Tamjinbyeo after 20days after heading. Total dry weight(TDW) of areal part was highest in SR11269F$_{6}$, followed by the Tamjinbyeo and SR7796F$_{7}$. Dry weight (DW) of stem (leaf sheath+culm) at harvesting stage was decreased 15%, 12% in Tamjinbyeo, SR11269F$_{6}$, respectively, but was increased 5% in SR7796F$_{7}$ compared to heading stage. In distribution rate of each organ to TDW, distribution rate of leaf blade was low in large grain cultivar, but that of stem in Tamjinbyeo, SR7796F$_{7}$ and SR11269F$_{6}$ was 36%, 38% and 42%, respectively. In canopy architecture leaf blade weight was the highest 30~40cm, 40~50cm and 70~8Ocm above the ground in SR11269F$_{6}$, Tamjinbyeo and SR7796F$_{7}$, respectively. Range of panicle distribution in the canopy was 40cm in Tamjinbyeo, and was 70cm in large-grain cultivars. The results suggest that it has to take a growing interest in developing culture method for increasing LAI during growth stage, especially, around heading, in keeping green leaf till ripening stage and also in growing unformly plant within rice hill in large grain cultivars.cultivars.ltivars.

• Economic and Environmental Geology
• /
• v.38 no.6 s.175
• /
• pp.717-729
• /
• 2005

Peak cooling load of large buildings is generally greater than their peak heating load. Internal and solar heat gains are used fur selection of adquate equipment in large building in cold winter climate like Canada and even Korea. The cost of geothermal heat exchanger to meet the cooling loads can increase the initial cost of ground source heat pump system to the extend less costly conventional system often chosen. Thermal ice storage system has been used for many years in Korea to reduce chiller capacity and shift Peak electrical time and demand. A distribution system designed to take advantage of heat extracted from the ice, and use of geothermal loop (geothermal heat exchanger) to heat as an alternate heat source and sink is well known to provide many benifits. The use of thermal energy storage (TES) reduces the heat pump capacity and peak cooling load needed in large building by as much as 40 to $60\%$ with less mechanical equipment and less space for mechanical room. Additionally TES can reduce the size and cost of the geothermal loop by 1/3 to 1/4 compared to ground coupled heat pump system that is designed to meet the peak heating and cooling load and also can eliminate difficuties of geothermal loop installation such as space requirements and thermal conditions of soil and rock at the urban area.