• The Journal of the Acoustical Society of Korea
• /
• v.34 no.1
• /
• pp.20-35
• /
• 2015

Underwater acoustic channel impulse responses (CIR) are influenced by sound speed profile (SSP), and the variation of CIR has significant effects on the performance of underwater acoustic communication systems. A significant change of SSP can occur within a short period, which must be considered during the design of underwater acoustic modems. This paper statistically analyzes the effect of the variation of SSP on the long-range acoustic signal propagation in shallow-water with thermocline using numerical modeling based on the data acquired from JACE13 experiment near Jeju island. The analysis result shows that CIR changes variously according to the SSP and the depth of the transmitter and receiver. We also found that when the transmitter and receiver are deeper, the variation of sound wave propagation pattern is smaller and signal level becomes higher. All CIR obtained in this study show that a series of bottom reflections due to downward refraction and small bottom loss in the shallow water with thermocline can be very important factor for long-range signal transmission and the performance of underwater acoustic communication system in time varying ocean environment can be very sensitive to the variation of SSP even for a short period of time.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1429-1433
• /
• 2010

수공구조물의 설계, 수자원 관리계획의 수립, 재해영향 검토 등을 수행할 때, 재현기간에 따른 확률개념의 강우량, 홍수량, 저수량 등을 산정하여 사용하게 되며, 보통 대상지역의 장기 수문관측 자료를 이용하여 수문사상의 확률분포를 산정한 후 재현기간을 연장하여 원하는 설계빈도에 해당하는 양을 추정하게 된다. 미계측지역 또는 관측자료의 보유기간이 짧은 지역의 경우는 지역빈도 분석 결과를 이용하게 된다. 지역빈도해석을 위해서는 강우자료들의 동질성을 파악하는 것이 가장 기본적인 과정이 되며 이를 위해 통계학적인 범주화분석이 선행되어야 한다. 지점 빈도분석의 수문학적 동질성 판별을 위해 L-moment 방법, K-means 방법에 의한 군집분석 등이 주로 사용되며 관측소 위치좌표를 이용한 공간보간법을 적용하여 시각화하고 있다. 강수량은 시공간적으로 변하는 수문변량으로서 강수량의 시간적인 특성 또한 강수량의 특성을 정의하는데 매우 중요한 요소이다. 이러한 점에서 본 연구를 통해 강수지점의 공간적인 좌표 및 강수량의 양적인 범주화에 초점을 맞춘 기존 지역빈도분석의 범주화 과정에 덧붙여 시간적인 영향을 고려할 수 있는 요소들을 결정하고 이를 활용할 수 있는 범주화 과정을 제시하고자 한다. 즉, 극치강수량의 발생 시기에 대한 정량적인 분석이 가능한 순환통계기법을 이용하여 관측 지점별 시간 통계량을 산정하고, 이를 극치강수량과 결합하여 시 공간적인 특성자료를 생성한 후 이를 이용한 군집화 해석 모형을 개발하는데 연구의 목적이 있다. 분석 과정에 있어서 시간속성의 정량화 및 일반화는 순환통계기법을 사용하였으며, 극치강수량과 발생시점의 속성자료는 각각의 평균과 표준편차를 이용하였다. K-means 알고리즘을 이용해 결합자료를 군집화 하고, L-moment 방법으로 지역화 결과에 대한 검증을 수행하였다. 속성 결합 자료의 군집화 효과는 모의데이터 실험을 통해 확인하였으며, 우리 나라의 58개 기상관측소 자료를 이용하여 분석을 수행하였다. 예비해석 단계에서 100회의 군집분석을 통해 평균적인 centroid를 산정하고, 해당 값을 본 해석의 초기 centroid로 지정하여, 변동적인 클러스터링 경향을 안정화시켜 해석이 반복됨에 따라 군집화 결과가 달라지는 오류를 방지하였다. 또한 K-means 방법으로 계산된 군집별 공간거리 합의 크기에 따라 군집번호를 부여함으로써 군집의 번호순서대로 물리적인 연관성이 인접하도록 설정하였으며, 군집간의 경계선을 추출할 때 발생할 수 있는 오류를 방지하였다. 지역빈도분석 결과는 3차원 Spline 기법으로 도시하였다.

• Journal of Life Science
• /
• v.20 no.7
• /
• pp.1086-1092
• /
• 2010

To estimate the genetic characteristics and cumulative power of discrimination (CPD) within Korean native commercial chicken, we used a total of 395 genomic DNAs from six breeds population (Korean Native Red chicken: R, Korean Native Yellow chicken: Y, Korean native Commercial Chicken: C, Ogal chicken: S, Hy-Line Brown: H, White Leghorn: W). Genetic diversity indices including mean allele number among loci, unbiased heterozygosity ($h_i$) within locus, effective number of alleles ($N_e$) and polymorphism information content (PIC) as well as the unbiased average heterozygosity (H) among loci in the populations were calculated using the generated allele frequencies by each marker. Frequencies of microsatellites markers were used to estimate heterozygosities and genetic distances. The nearest distance (0.119) was observed between the C and Y strains. The generated unbiased average heterozygosity among loci in each population was integrated to the global formula of CPD and the result demonstrated that the CPD within the six chicken populations was 99.461%.

• The Korean Journal of Ecology
• /
• v.28 no.6
• /
• pp.375-382
• /
• 2005

The American bullfrog, Rana catesbeiana was imported from Japan for farming for the human consumption in 1970's and introduced populations were a great threat to native habitats in the pond and lake ecosystem. However, it is thought that the population of bullfrog has rapidly declined for past years in Korea. In this study, we investigated the intra-genetic diversity of R. catesbeiana habitated in Korea. The nucleotide sequences of 1,215bp mitochondrial ND1/tRNA region in bullfrogs sampled from 5 sites in Jeollanamdo were analyzed and compared to the original sequence of R. catesbeiara reported in Genbank. The nucleotide similarity between Korean and North American bullfrog was ranged from 98.7% to 100% based on kimura-2-parameter distance. In addition, bullfrogs analyzed in this study were clustered into two groups with one including Jangheung and the other including Gwangju populations in the neighbor-joining tree. North American R. catesbeiana was grouped in Jangheung cluster, indicating that there is the very low genetic difference between Korean and North American populations. The maximum parsimony tree in which North American R. catesbeiana was set as an outgroup suggests that Jangheung group represents the introduced population to Korea. Taken together, the results indicate that the population of R. catesbeiana in Korea has not segregated geographically yet, after the introduction.

• Journal of Korean Society of Forest Science
• /
• v.103 no.1
• /
• pp.59-64
• /
• 2014

This study describes analysis of genetic diversity and spatial genetic structure of Korean poplar (Populus koreana Rehder) in Mt. Odae using I-SSR markers. P. koreana is a deciduous broad-leaved tree species that primarily grows in the alpine valleys of China, Russia and North Korea. In South Korea, P. koreana is found limitedly in Gangwon province. Especially, the population in Mt. Odae is located on the southern limit line, its importance is emphasized from the genetic resource conservation perspective. The Shannon's diversity (I=0.230) and the expected heterozygosity (He=0.151) were relatively low as compared with those of other plant species. Spatial autocorrelation analysis using Tanimoto's distance showed that the genetic patch was founded within 400 m. It is suggested that individual trees for ex situ conservation should be sampled with a minimum distance of 400 m between trees.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.73-78
• /
• 2005

본 연구에서는 서울시 한강에 위치한 교량을 대상으로 다양한 조망점에 따른 경관조명의 물리량을 측정하고 그 특성을 분석함으로써 동일한 연구대상에 대하여 조망점이 달라졌을 때 나타나는 물리적 변화를 통해 경관조명분야의 물리량평가방법론의 새로운 접근방법론을 제시하는 것이 목적이다. 이를 위하여 연구대상의 선정은 교량구조형식에 따라 분류하고. 경관조명이 설치된 교량 17개소 중 다양한 조망점과 현장측정의 편리성 등을 고려하여 광진교(거더교), 올림픽대교(사장교), 동작대교(트러스교), 동작대교(아치교)를 연구대상으로 선정하였다. 조망점은 한강둔치를 이용하는 방문객들이 바라보는 투시뷰, 교량주변 건축물에서 바라보는 건물뷰 그리고 교량 위를 이동하면서 바라보는 주행뷰로 구분하였다. 이러한 연구방법으로 도출된 결과는 동일한 경관조명연출을 토대로 교량별 조망점에 따른 휘도측정 및 분석에서 측정되는 각도, 거리, 방향에 따라 정형화된 비율은 아니지만 휘도값에 있어서 차이가 있다는 것을 확인 할 수 있었으며, 투시뷰와 건물뷰는 동일한 교량 구성요소를 갖고 있어 상호간 비교 분석이 가능하고 경관조명평가 요소로서 그 기능을 담당 할 수 있다고 판단되며, 주행뷰는 교량형식과 가로등의 영향을 많이 받으므로 평가요소로써 조망점을 활용하기에는 조금 더 깊은 연구가 선행되어야 할 것으로 보인다. 따라서 경관조명을 평가함에 있어 다양하게 바라보는 조망점은 조명연출로 인한 시각적 인식에 차이를 유발시킬 수 있어 경관조명을 평가할 때 다양한 조망점의 설정이 보다 객관적이고 정확한 분석이 가능할 것으로 판단된다.ridinium의 분포는 chlorophyll-a농도와 밀접한 관련성이 있었다. 담수적조의 현존량은 상류지역에서 $8.5\;{\times}\;10^3\;cell\;mL^L{-1}$로서 많았고, 댐부근의 하류지역($4.4\;{\times}\;10^2\;cell\;mL^L{-1}$)으로 갈수록 감소하는 양상을 보였다. 또한, 담수적조의 원인종으로 규조류 Synedra acus와 남조류 Microcystis aeruginosa도 소량관찰되었다. 저수지의 수질 부영양화 현상은 기존 경사사면형 농경지를 기반으로 조성되었으므로 저층으로부터 풍부한 영양환경을 내재하고 있었고, 담수 초기에 발생할 수 있는 가능성을 포함하고 있었다. 또한 유입수량의 부족과 현재 수질개선을 위해 적용하고 있는 수중폭기시설등의 물리적인 영향도 직 ${\cdot}$ 간접적으로 작용하였을 것으로 추정되었다 따라서 향후 이에 대한 중장기적인 모니터링이 필요하였고 유역과 저수지의 통합적인 수질관리계획 이 요구되었다.group으로, 용존산소량, 전기전도도, pH, 인산염이 정점 3, 4, 5에서 같은 group으로 묶였다.유의적인 CAT 활성 증가효과가 나타났고, 간조직의 시토졸 1획분에서는 대조군 대비 15${\sim}$27%의 CAT 활성 증가효과가 인정되었다. 이상의 결과에서 목초액의 장기간 투여는 간조직 중의 활성산소의 억제효과뿐만 아니라 방어시스템으로서 활성산소 제거효소의 역할도 충실히 수행하여 노화를 효과적으로 예방하고 억제할 수 있을 것으로 기

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1087-1096
• /
• 2011

Vehicular Ad Hoc Network(VANET) using wireless network is offering the communications between vehicle and vehicle(V2V) or vehicle and infrastructure(V2I). VANET is being actively researched from industry field and university because of the rapid developments of the industry and vehicular automation. Information, collected from VANET, of velocity, acceleration, condition of road and environments provides various services related with safe drive to the drivers, so security over network is the inevitable factor. For the secure message authentication, a number of authentication proposals have been proposed. Among of them, a scheme, proposed by Jung, applying database search algorithm, Bloom filter, to RAISE scheme, is efficient authentication algorithm in a dense space. However, k-anonymity used for obtaining the accurate vehicular identification in the paper has a weak point. Whenever requesting the righteous identification, all hash value of messages are calculated. For this reason, as the number of car increases, a amount of hash operation increases exponentially. Moreover the paper does not provide a complete key exchange algorithm while the hand-over operation. In this paper, we use a Received Signal Strength Indicator(RSSI) based velocity and distance estimation algorithm to localize the identification and provide the secure and efficient algorithm in which the problem of hand-over algorithm is corrected.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.588-594
• /
• 2015

Although GPS technology for location positioning system has been widely used, it is difficult to be used in intelligent transport systems, due to the large positioning error and limited area for receiving radio signals. Thanks to the rapid development of LED technology, LED lights become popular in many applications. Especially, visible light communications (VLC) has raised a lot of interests because of the simultaneous functioning of LED illumination and communication. Recent studies on positioning system using VLC mainly focused on indoor environments and still difficult to satisfy positioning accuracy and simple implementation simultaneously. In this paper, we propose a positioning system based on VLC using the coordinate information of LEDs installed on the road infrastructure. Extracting the LED signal, obtained through VLC, from the easily accessible camera image, it is possible to estimate the position of the car on the road. Simulation results show that the proposed scheme can achieve a high positioning accuracy of 1 m when large number of pixels is utilized and the distance from the LED light is close.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.393-402
• /
• 2006

The contamination characteristics of BTEX and TPH components in silty soils with the oil leakage event from point source were studied. The over ratios of three soil pollution standard for TPH component were $1.5{\sim}1.7$ times higher than that of BTEX component. The mean and maximum values of BTEX and TPH components with sample points were B-zone > A-zone > C-zone, and the highest concentrations were measured at $1{\sim}2m$ depth below surface. BTEX and TPH components were increased with linear distance in zone within 120 m and 80 m from point source. For the zone more than 120 m, BTEX and TPH concentrations were under soil pollution standard. The cutoff values of indicator kriging using BTEX and TPH components were defined as confirmative limit, warn- ing limit and counterplan limit. The variograms of indicator-transformed data were selected linear model. The contamination ranges of BTEX and TPH components using confirmative limit and warning limit were estimated similar, but the contamination range of those using counterplan limit was much reduced. The maximum contamination probabilities were estimated by probability maps usinB confirmative limit, warning limit and counterplan limit. The maximum contamination probabilities with three soil pollution standard were estimated 26%, 26% and 13% for BTEX component, and 44%, 38% and 26% for TPH component.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.12
• /
• pp.1086-1092
• /
• 2012

It has been studied for DGPS/INS(Differential Global Positioning System/Inertial Navigation System) to offer the more precise and reliable navigation data with the aviation industry development. The flight performance evaluation of navigation system is very significant because the reliability of navigation data directly affect the safety of aircraft. Especially, the high-level navigation system, as DGPS/INS, need more precise flight performance evaluation method. The performance analysis is performed by comparing between the DGPS/INS navigation data and reference trajectory which is more precise than DGPS/INS. The GPS receiver, which is capable of post-processed CDGPS(Carrier-phase DGPS) method, can be used as reference system. Generally, the DGPS/INS is estimated the CG(Center of Gravity) point of aircraft while the reference system is output the position of GPS antenna which is mounted on the outside of aircraft. For this reason, estimated error between DGPS/INS and reference system will include the error due to lever arm. In order to more precise performance evaluation, it is needed to compensate the lever arm. This paper presents procedure and result of flight test which includes lever arm compensation in order to verify reliability and performance of DGPS/INS more precisely.