• Title/Summary/Keyword: 거리 추정

Search Result 1,613, Processing Time 0.026 seconds

Impact of GTX-A Line to Seoul Metropolitan Integrated Public Transit Fare Paradox (GTX-A 노선의 수도권 통합대중교통 요금 Paradox 영향 추정)

  • Seongil Shin;Seok Ho Kim;Hee Chun Kim
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.22 no.1
    • /
    • pp.25-38
    • /
    • 2023
  • Seoul Metropolitan Urban Railroad has an undecided route that does not estimate the passenger transportation route. For this reason, the fare of the urban railroad is calculated by the assumption that passengers pass through the minimum distance. Therefore, if a transfer station on the urban railroad is added, the trip shortest distance could be decreased and the fare also reduced. In this study, this phenomenon defines the fare paradox(Shin, 2022) and estimates the impact of the fare paradox by opening the GTX-A. For this purpose, a scenario before and after the opening of the GTX-A has been established, and an additional fare has been estimated by proportional planning of the Seoul Metropolitan Integrated Distance Based Fare Policy. Fare Paradox was analyzed to about 0.024 % of daily income. It is expected to be used as a plan to determine a rate policy, such as the establishment of a GTX-A, B, C, D, and a light rail line.

Study on the Development of Advanced Road Environment Sensor and Estimation Formula for Fog Visibility Distance (보급형 도로환경센서 및 안개 가시거리 추정식 개발 연구)

  • Cho, Jungho;Jin, Minsoo;Cho, Wonbum
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.21 no.4
    • /
    • pp.50-61
    • /
    • 2022
  • Snow, rain, fog, and particulate matter interfere with the vehicle driver's vision, which causes a non-secure safety distance and an increase in speed deviation, causing repetitive large-scale traffic accidents. This study developed a road environment sensor capable of measuring 11 types of fog, snow, rain, temperature, humidity, direction of wind, speed of wind, Insolation, atmospheric pressure, fine particles, rainfall, etc. and compared the visibility measured by the infrared signal value of the development sensor. The relationship between the existing fog visibility sensor and the development sensor measurement was derived from data measured at a visibility of 500m or less that directly affects road safety.

Calculation of Total Benefit by the Contingent Valuation Method for Cost-Benefit Analysis: Focusing on Income and Distance-Decay Effects (비용편익분석을 위한 조건부가치측정법에서의 총편익 산정: 소득효과 및 거리-소멸 효과를 중심으로)

  • Lee, Jongyearn
    • KDI Journal of Economic Policy
    • /
    • v.36 no.1
    • /
    • pp.43-80
    • /
    • 2014
  • This study suggests a model for calculating total benefit rigorously to use the contingent valuation method (CVM) in cost-benefit analysis (CBA). Estimating households' willingness to pay through survey method, the study attempts to demonstrate if a respondent's income and the distance between a respondent's residence and the location of a target facility affect her willingness to pay. The estimation results from a structural model show that income and distance-decay effects exist and that the calculated total benefit varies largely when these effects are ignored. The study emphasizes the effects of income and distance-decay on the total benefit must be carefully considered in using CVM for CBA. Even though the total project cost is precisely estimated, the benefit/cost (B/C) ratio may differ largely when the total benefit is not correctly calculated. Also, an ad hoc model generates significantly different estimates from the utility difference model this study adopted. The difference in estimates suggests that the total benefit has to be estimated by a structural model. Finally, simulations are performed to check the validity of the model as well as to predict consequences when income and distance-decay effects are not properly treated. The results from simulations reveal it is not desirable to ignore those effects considering the perspectives of balanced regional development.

  • PDF

An Improved Chamfer Matching Using Chamfer Distance Interpolation and Subpixel Search (Chamfer 거리 보간과 서브픽셀 탐색을 이용 한 개선된 Chamfer Matching)

  • Cho, Tai-Hoon
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2007.05a
    • /
    • pp.353-356
    • /
    • 2007
  • chamfer 정합(matching)은 많은 응용분야에서 사용되온 에지(edge) 기반 정합기법으로, 변환된 모델에지와 영상에지간의 거리를 최소화하는 과정이다. 이 거리는 보통 거리변환을 이용하여 픽셀분해능으로 계산된다. 본 논문에서는 서브픽셀(subpixel) 거리계산을 위해 거리계산시 보간법을 사용하여, 정확한 chamfer 정합을 구현한, 개선된 chamfer 정합 방법을 제안한다. 또한, 보다 정밀한 정합을 위해, 최소거리를 갖는 픽셀위치의 주변영역을 이용하여 최적의 위치를 추정하지 않고, 서브픽셀로 실제 거리계산을 통해 최소 거리를 찾기 위해 Powell 의 최적화기법을 이용하였다. 실험결과는 제안된 방법의 타당성을 보여주었다.

  • PDF

Localization Using Extended Kalman Filter based on Chirp Spread Spectrum Ranging (확장 Kalman 필터를 적용한 첩 신호 대역확산 거리 측정 기반의 위치추정시스템)

  • Bae, Byoung-Chul;Nam, Yoon-Seok
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.49 no.4
    • /
    • pp.45-54
    • /
    • 2012
  • Location-based services with GPS positioning technology as a key technology, but recognizing the current location through satellite communication is not possible in an indoor location-aware technology, low-power short-range communication is primarily made of the study. Especially, as Chirp Spread Spectrum(CSS) based location-aware approach for low-power physical layer IEEE802.15.4a is selected as a standard, Ranging distance estimation techniques and data transfer speed enhancements have been more developed. It is known that the distance measured by CSS ranging has quite a lot of noise as well as its bias. However, the noise problem can be adjusted by modeling the non-zero mean noise value by a scaling factor which corresponds to the change of magnitude of a measured distance vector. In this paper, we propose a localization system using the CSS signal to measure distance for a mobile node taken a measurement of the exact coordinates. By applying the extended kalman filter and least mean squares method, the localization system is faster, more stable. Finally, we evaluate the reliability and accuracy of the proposed algorithm's performance by the experiment for the realization of localization system.

A Comparative Analysis of Linearity and Range of Gravity and Magnetic Data Using Variogram (베리오그램을 이용한 중력과 자력 자료의 선형성 및 상관거리 비교 분석)

  • Park, Gye-soon;Park, No-Wook
    • Journal of the Korean earth science society
    • /
    • v.31 no.2
    • /
    • pp.119-128
    • /
    • 2010
  • To make reliable interpretations on the sparse spatial data, the spatial distribution characteristics that are inevitable for spatial estimation should be properly analyzed. Variograms have been widely used for obtaining the spatial characteristics inherent to data in spatial estimation problems. But their applications were limited as the basic information for further data estimation. Therefore, the additional analysis of the meaning of variograms is required for more reliable data processing and interpretations. In this paper, we investigated the proper meaning of variogram values and the specific features of distributions which can be obtained through variogram analysis. Variograms can provide the information on both linearity and the strength changes of interrelationships between the data sets according to the direction and lag distance. First, sill and range values, which are main parameters of variograms, were analyzed. Then a similarity range using spatial auto-correlation values was introduced to verify the applicability of linearity analysis through the comparative study of spatial distribution features of gravity and magnetic data collected in Hwasan caldera. Through these analyses, we were able to identify the dissimilar patterns of gravity and magnetic data that became apparent according to the distribution and variation ranges of the data sets. It is inferred that the gravity and magnetic anomalous bodies are extended to the ground because linearity direction of gravity and magnetic data appear similarly with linearity derection of topography in Hwasan caldera.

Penalized least distance estimator in the multivariate regression model (다변량 선형회귀모형의 벌점화 최소거리추정에 관한 연구)

  • Jungmin Shin;Jongkyeong Kang;Sungwan Bang
    • The Korean Journal of Applied Statistics
    • /
    • v.37 no.1
    • /
    • pp.1-12
    • /
    • 2024
  • In many real-world data, multiple response variables are often dependent on the same set of explanatory variables. In particular, if several response variables are correlated with each other, simultaneous estimation considering the correlation between response variables might be more effective way than individual analysis by each response variable. In this multivariate regression analysis, least distance estimator (LDE) can estimate the regression coefficients simultaneously to minimize the distance between each training data and the estimates in a multidimensional Euclidean space. It provides a robustness for the outliers as well. In this paper, we examine the least distance estimation method in multivariate linear regression analysis, and furthermore, we present the penalized least distance estimator (PLDE) for efficient variable selection. The LDE technique applied with the adaptive group LASSO penalty term (AGLDE) is proposed in this study which can reflect the correlation between response variables in the model and can efficiently select variables according to the importance of explanatory variables. The validity of the proposed method was confirmed through simulations and real data analysis.

Estimating Farmland Prices Using Distance Metrics and an Ensemble Technique (거리척도와 앙상블 기법을 활용한 지가 추정)

  • Lee, Chang-Ro;Park, Key-Ho
    • Journal of Cadastre & Land InformatiX
    • /
    • v.46 no.2
    • /
    • pp.43-55
    • /
    • 2016
  • This study estimated land prices using instance-based learning. A k-nearest neighbor method was utilized among various instance-based learning methods, and the 10 distance metrics including Euclidean distance were calculated in k-nearest neighbor estimation. One distance metric prediction which shows the best predictive performance would be normally chosen as final estimate out of 10 distance metric predictions. In contrast to this practice, an ensemble technique which combines multiple predictions to obtain better performance was applied in this study. We applied the gradient boosting algorithm, a sort of residual-fitting model to our data in ensemble combining. Sales price data of farm lands in Haenam-gun, Jeolla Province were used to demonstrate advantages of instance-based learning as well as an ensemble technique. The result showed that the ensemble prediction was more accurate than previous 10 distance metric predictions.

Improvement of Multilateration using Vector Prediction Algorithm and Kalman Filter (벡터 예측 알고리즘과 칼만 필터를 이용한 다변측량법 개선)

  • Kim, Jung-Ha;Joo, Yang-Ick;Lee, Sung-Geun;Park, Sang-Gug;Seo, Dong-Hoan
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.16 no.12
    • /
    • pp.2792-2799
    • /
    • 2012
  • Multilateration that consists of three or more fixed nodes has been widely used in the field of indoor real time location system(RTLS). However, when one or two among fixed nodes are partially out of communication reachability due to obstruction and unstable node, it is difficult to obtain an efficient location information. In order to improve the challenges of poor ranging measurements and fluctuations in these environment, this paper presents, based on TOF(Time of Flight), a new algorithm which can reduce the inherent ranging measurements errors in the conventional multilateration using a vector prediction algorithm for the displacement estimation of mobile node and Kalman filter for an efficient distance average. Even if a person moves with mobile node and then it fails ranging measurement from some of fixed nodes, the proposed algorithm using a present and previous measurement value can predict the distance between mobile node and fixed node which fails ranging measurement. The experimental results are shown that the proposed system improves the localization accuracy and efficiency compared with conventional method, respectively.

세종 산개성단 탐사관측 (SOS) II. 중년 산개성단 NGC 2353의 UBVI CCD 측광

  • Im, Beom-Du;Seong, Hwan-Gyeong;Karimov, R.;Ibrahimov, M.
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.35 no.2
    • /
    • pp.79.1-79.1
    • /
    • 2010
  • 세종 산개성단 탐사관측 연구의 일환으로 중년 산개성단 NGC 2353에 대한 UBVI CCD 측광을 수행하였다. 측광학적인 방법으로 성단 내의 구성원을 선정하였으며, 이로부터 이 성단의 성간소광과 거리를 각각 E(B-V)=$0.10\pm0.02mag$$d=1.17\pm0.04\;kpc$으로 얻었다. 성단 구성원의 공간적인 분포를 통해서 성단의 형태가 북서 방향에서 남동 방향을 잇는 축을 중심으로 타원의 형태를 띠고 있는 것을 발견하였다. Padova 그룹이 제시한 이론적인 등연령 곡선을 관측한 색등급도에 맞춤으로써 이 성단의 나이를 1억 3천만년으로 추정하였으며, 이는 기존 연구보다 나이가 많은 것으로 나타났다. 구성원의 거리지수 분포에서 이 성단의 거리지수보다 밝은 곳에 나타나는 쌍성의 분포를 Gaussian 분포와 맞추어 $46\pm4%$ 정도의 최소 쌍성비율을 추정하였다. 마지막으로 광도함수와 질량함수를 유도하였고, 질량함수의 기울기는 $\Gamma=-1.4\pm0.2$를 얻었다.

  • PDF