• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.226.1-226.1
• /
• 2014

이온빔 소스는 반도체 및 디스플레이 공정에 있어, 표면 에칭 및 증착 등 여러 응용 분야에 활발히 이용되고 있다. 본 연구에 사용된 원형 이온빔 소스는 선형 이온빔 소스의 가장자리에서의 특성 분석을 위해 제작되었으며, 높은 직류전압과 자기장 공간에서 플라즈마를 방전시키고 발생된 이온들을 가속시켜 높은 에너지의 이온빔을 발생시킨다. 이온빔 특성 분석을 위해 전위지연 탐침과 패러데이 탐침을 개발하였다. 전위지연 탐침은 격자판에 전압을 인가하여 선택적으로 이온을 수집하고, 이온의 에너지분포함수를 측정한다. 패러데이 탐침은 이온 수집기와 가드링으로 구성되어 수집기 표면에 일정한 플라즈마 쉬스를 형성하여 정확한 이온전류밀도를 측정한다. 본 연구에서는, 아르곤 기체를 이용하여 기체유량(8~12 sccm) 및 방전전압(1~2 kV)에 따라 방전전류 16~54 mA, 소모전력 16~108 mW의 특성을 보였다. 운전압력은 0.4~0.54 mTorr이며, 이온소스로부터 18 cm 거리에서 이온전류밀도와 이온에너지분포를 측정하였다. 또한, 중공음극선을 이용하여 인위적으로 전자를 이온 소스에서 발생된 플라즈마에 공급하고 이온빔 및 플라즈마의 특성 변화를 위 시스템에서 분석하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.91-102
• /
• 2020

This study constructed production frontiers of inputs and outputs in a sequential manner, measured inefficiencies by applying a non-radial sequential weighted Russell directional distance function to these frontiers, and analyzed Luenberg productivity indices and the contribution of each of input and output factor based on these distances. The results are as follows. First, the productivity of banks increased due to technical changes after the global financial crisis. Second, productivity growth decreased between 2009 and 2014 due to technical changes after the recession, as previous studies have shown that technology progressed before the global financial crisis but then largely decreased or remained the same thereafter. After 2014, the productivity of banks improved. This result may be due to both technology improvement after 10 years of stagnation and reduction of inputs and non-performing loans. Third, the 3.6% annual of productivity growth for 10 years was comprised of 1.77% household loans, 0.67% corporate loans, 0.98% manpower, 1.18% non-performing loans, -0.5% total deposits, and -1.25% securities. Finally, this study has limitations since it could not control risks such as capital structure and interest volatility.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.369-376
• /
• 2003

We analyzed the aspheric and/or diffractive surface effects to the performance in the long wavelength infrared (8-12 $\mu$m). Also we investigated the dependence of the NA values for the fixed effective focal length 100 mm when the field angle was varied from 5 degrees to 30 degrees stepped by 5 degrees. We chose the merit function as a criteria to compare the performance of the different lenses. Based on the analysis of the aspheric and/or diffractive surface effects, we designed the optical system of F/l.0 for the uncooled thermal imaging system. As for detector the pixel size was 45 $\mu$m square and the number of pixels were a 320${\times}$240 pixels.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2757-2763
• /
• 2015

p-Snake is an energy minimizing algorithm that applies an additional prototype energy to the existing Active Contour Model and is used to extract the contour line in the area where the edge information is unclear. In this paper suggested the creation of a prototype energy field that applies a variable prototype expressed as a combination of circle and straight line primitives, and a fudge function, to improve p-Snake's contour extraction performance. The prototype was defined based on the parts codes entered and the appropriate initial contour was extracted in each primitive zones acquired from the pre-processing process. Then, the primitives variably adjusted to create the prototype and the contour probability based on the distance to the prototype was calculated through the fuzzy function to create the prototype energy field. This was applied to p-Snake to extract the contour from 100 images acquired from various small parts and compared its similarity with the prototype to find that p-Snake made with the adaptive prototype was about 4.6% more precise than the existing Snake method.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.06a
• /
• pp.246-248
• /
• 2019

최근 딥 러닝을 이용한 방법들이 이미지 분류에서 뛰어난 성능을 보임에 따라, 컴퓨터 비전의 중요한 문제 중 하나인 이미지 검색에도 이를 활용하고 있다. 특히, 이미지 검색에 사용할 수 있는 이미지 기술자 (Image descriptor)를 깊은 신경망 구조의 일부분인 Fully-connected layer에서 추출하여 사용하는 방법들이 제시되고 있고, 이를 위해 알맞은 목적함수를 설계하여 깊은 신경망을 학습하는 것이 중요해지고 있다. 딥 러닝을 통해 얻은 이미지 기술자는 실수형 데이터로서, 한 장의 이미지를 수치화하여 표현하는 데 많은 메모리를 소모하게 된다. 이를 보완하기 위해 이미지 기술자를 작은 용량의 이진코드로 mapping 하는 해싱 (hashing) 이라는 과정이 필수적이나 이에 따른 한계점이 발생한다. 본 연구에서는 실수형 데이터가 갖는 거리 계산에서의 이점과 이진코드의 장점을 동시에 살릴 수 있는 Product Quantization 방식의 이미지 검색 방법을 이용하여 한계점을 극복하였다. 우리는 제안한 방법을 얼굴 이미지 데이터 셋에 실험하였고 기존 방식보다 뛰어난 성능을 보이는 것을 확인할 수 있었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.1229-1231
• /
• 2022

RGBD 영상은 다양한 3 차원 비전 연구에서 유용하게 사용되며 고품질 RGBD 영상을 취득하기 위한 많은 연구들이 수행되었다. 기존의 영상 생성 연구들은 주로 좁은 FoV(Field of View) 영상을 사용하여서 전체 장면 중 상당 부분이 소실된 영상에 대한 정보를 생성한다. 본 논문에서는 기존의 좁은 FoV 영상으로부터 360 도 전방향 RGBD 영상을 생성하는 기법을 제안한다. 오버랩 되지 않는 4 장의 소수 영상으로부터 전체 파노라마 영상에 대해서 상대적인 FoV 를 추정하고, 360 도 RGBD 영상을 동시에 생성하는 적대적 생성 신경망 기반의 영상 생성 네트워크이다. 360 도 영상의 특징을 반영하도록 설계하여서 개선된 성능을 보인다.

• Explosives and Blasting
• /
• v.9 no.1
• /
• pp.3-13
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ${\phi}70mm$ on the calcalious sand stone (soft -modelate -semi hard Rock). The total numbers of test blast were 88. Scale distance were induced 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagtion Law in Blasting Vibration $V=K(\frac{D}{W^b})^n$ were V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum charge per delay-period of eight milliseconds or more (kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents where the quantity $\frac{D}{W^b}$ is known as the scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagorized in three groups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge Per delay Plots of peak particle velocity versus distoance were made on log-log coordinates. The data are grouped by test and P.P.V. The linear grouping of the data permits their representation by an equation of the form ; $V=K(\frac{D}{W^{\frac{1}{3}})^{-n}$ The value of K(41 or 124) and n(1.41 or 1.66) were determined for each set of data by the method of least squores. Statistical tests showed that a common slope, n, could be used for all data of a given components. Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom over loom distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m ------- under l00m ${\cdots\cdots\cdots}{\;}41(D/sqrt[2]{W})^{-1.41}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}A$ Over 100m ${\cdots\cdots\cdots\cdots\cdots}{\;}121(D/sqrt[3]{W})^{-1.66}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}B$ where ; V is peak particle velocity In cm / sec D is distance in m and W, maximLlm charge weight per day in kg K value on the above equation has to be more specified for further understaring about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.487-494
• /
• 2020

The distance between the source and the detector, the diameter of the detector, and the volume effect of the radiation source result in a change in solid angle at the detector entrance, which affects the determination of detection efficiency by causing a difference in path length within the detector. A typical analysis method for calculating solid angles was useful only for a source (⁶⁰Co) with a simple geometric structure, so in this experiment, the distance between the detector and the source was measured by switching on for up to 25 cm with the reference point of window cap 0.5 cm. In addition, 450 and 1000 ㎖ Marinelli beaker of standard volumetric sources were closely adhered to the detector. For circular point sources co-axial with the detector, the change in the solid angle to the distance from the detector window is equal to half the square radius of the source versus the square radius of the detector, if the resulting relationship of the calculation analysis results in the detector being less than the radius of the source. Since the solid angular difference is 0.5 the result of Monte Carlo is acceptable. The relationship between detector and source distance is shown. Solid angles have been verified to decrease rapidly with distance. Measurement and simulation results for a volumetric source show a difference of ±1.01% from a distance of 0 cm and less than 4 % when the distance is reduced to 5 and 10 cm. It can be seen that the longer distance, the smaller efficiency angle, and the exponential increase in attenuation as the energy decreases, is reflected in the calculation of efficiency. Thus, the detection efficiency has proved sufficient for the use of solid angle and Monte Carlo codes.

• Korean Journal of Environment and Ecology
• /
• v.2 no.1
• /
• pp.50-65
• /
• 1988

Trail and campground deteriorations and their environmental changes of soil and vegetation were studied in Guryong district of Mt. Chiak National Park in 1988. The Widths of both the entire trail and the bare portion as the trail condition were significantly greater on the more heavily used trail. and regressions showed the significant positive relationship between slope along the trail and maximum depth of the trail($R^2$=0.35). Deterioration types of trail which had higher frequency for a total of 63 observations were rock exposure(48%), trail deepening(29%) and root exposure(27%) in the high order. And occurence of trail deterioration was considerably influenced by slope along the trail Ecological changes of soil and vegetation of trailsides were not found at a uniform tendency but could be grouped, by the types of user's disturbance. On campsites. tree damage types and their frequencies were basic as a means of which grasp the limits of user's impact. The area with damaged trees on campsite in pine forest were larger than that in mixed forest and the frequency by damage type of trees varied according to the distance from the core of campsite and to the crown layer. Water content, pH and hardness of soil. coverage of lower trees, species and individuals per 100$m^2$, basal areas of upper and middle layer of trees had significant relationship with the distance from campsite to forest. The range influenced by user's disturbance was more than 70-80m, md Staphylea bumalda, Morns bombycis, Stephanandra incisa and Securinega suffruticosa were considered as tolerant species to user's impact.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11C
• /
• pp.957-964
• /
• 2010

In this paper, we propose an indoor positioning algorithm based on 3 points near field angle-of-arrival estimation without side information. The conventional angle-of-arrival based positioning scheme requires the distance between the listener and the center of two points which is obtained by a received signal strength based range estimation. However, a received signal strength is affected by structure of room, placement of furniture, and characteristic of signal, these effects cause a large error to estimation of angle. In this paper, the proposed positioning scheme based on near field angle-of-arrival estimation can be used to estimate the position of listener without a prior distance information, just using time-difference-of-arrival information given from 3 points microphones. The performance of the proposed scheme is shown by cumulative distribution function of root mean squared error.