• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.17-18
• /
• 2018

본 논문에서는 병실의 침대 위에서 움직임으로 침대 밖으로 떨어지는 것을 방지하기 위한 환자감시 시스템인 낙상 방지 시스템을 제안한다. 환자는 휴식을 취하거나 각종 처치를 위하여 침대에 머무르게 된다. 이 과정에서 대부분의 환자들은 기력이 낮아지고 자기 신체에 대한 제어 능력이 낮아져 침대의 바깥쪽으로 움직이는 경우가 종종 발생한다. 본 논문에서는 초음파를 이용한 환자까지의 거리 맵을 생성한 다음 거리 맵을 기반으로 환자의 위치를 추정하였다. 경과 측정거리는 10mm 이내로 측정이 가능하였고, 기존의 방식과 비교하여 내구성과 활용성이 우수하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.261-263
• /
• 2011

이 논문에서는 쿼리-바이-싱잉/허밍 (Query-by-singing/humming, QbSH) 시스템에서의 거리 함수를 다양화하면서 그 성능 변화를 살펴본다. QbSH는 디지털 음악의 사용이 보편화되면서 음악 검색의 방법으로 많은 연구가 진행되어 왔으며, 많은 경우, dynamic time warping (DTW) 방법으로 사용해서 정합하고 있다. 그러나, DTW에서 사용하는 거리에 대해서는 특별한 관심을 가지지 않았으며, 일반적으로 절대적 차이값이나 그것의 제곱값을 많이 사용해 왔다. 이 논문에서는 여러 가지 거리에 대해서 성능을 측정하였다. 성능측정은 특정한 시스템에서 이루어진 것이기 때문에 일반성을 가지지 않을 수 있으나, DTW에서 사용하는 거리를 기존의 것과 다른 것으로 변화시켜서 성능을 향상시킬 가능성이 있음을 이 논문에서는 밝힌다. 본 논문에서는 10-12초 길이의 1000번의 쿼리 (Query)에 대해서 28시간 정도의 데이터베이스에서 실험한 결과, 논문에서 제안하는 거리가 기존의 절대적 차이값을 사용한 것보다 제1후보 검출 정확도가 10% 가량 상승함을 확인할 수 있었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.7
• /
• pp.885-890
• /
• 2020

In the distance measurement system the time-to-digital conversion circuit used measures the distance using the time interval between the start signal and the stop signal. The time interval is generally converted to digital information using a counter circuit considering the response speed. Therefore, a clock signal with a high frequency is required to improve precision, and a clock signal with a high frequency is also required to measure fine distances. In this paper, a counter circuit was designed to increase the accuracy of distance measurement while using the same frequency. The circuit design was performed using a 0.18㎛ CMOS process technology, and the operation of the designed circuit was confirmed through HSPICE simulation. As a result of the simulation, it is possible to obtain an improvement of four times the precision compared to the case of using a general counter circuit.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.101-104
• /
• 2008

현대에 컴퓨터를 기반으로 무선으로 데이터를 측정하고 제어하는 device들이 보편화 되어있으며, 낮은 가격으로 높은 성능을 낼 수 있는 device들이 각광 받고 있다. 그리고 산업 환경에서 유선 이용이 불가능한 곳이나 직접 사람이 들어갈 수 없는 위험한 장소와 거리 측정할 때 Zigbee 통신 Solution을 이용한다면 공간의 제약 없이 컴퓨터로 데이터를 분석 처리할 수 있다. Zigbee 통신은 기존의 RF나 bluetooth등에 비해 전력 소모에서 효율적이고 battery 사용을 장시간 사용할 수 있는 장점을 가지고 있다. 또한 시스템 구현 비용이 아주 저렴하기 때문에 네트워크에 많은 노드들을 설치 할 수 있다. 이에 본 논문에서 구현한 거리 측정 무선 송/수신 시스템은 여러 개의 LMC(Laser Measuring Control)와 이에 상응하는 여러 개의 Slave Zigbee에서 하나의 Master Zigbee 까지 무선으로 데이터를 송신한다. Master Zigbee는 LMC에서 측정한 데이터들을 수신 받아 컴퓨터로의 처리를 하고자 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.8
• /
• pp.1813-1819
• /
• 2011

In this research, the location positioning system supposed is concerned with range recognition technology using phase and magnitude of radio wave and adding technology of image histogram by vision. By the proposed technology, we design the radio transmitter and receiver and realize the measurement system, and save the data in disk that is earned from 900Mhz RF signal, middle frequency 450Khz of analog signal. Range information is earned the data through digital signal processing of IF signal. For the estimation of range measured, we analyze the difference between real range and measurement range, and also suggest the method to improve the measurement error using average processing and amplitude properties.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.4
• /
• pp.808-814
• /
• 2007

In this paper, the measurement system of crane moving range is concerned with range recognition technology using phase and magnitude of radio wave. By the proposed technology, we design the radio transmitter and receiver and realize the measurement system, and save the data in disk that is earned from 900Mhz RF signal, middle frequency 450khz of analog signal. As a result of RF measurement, we got 9.3 dBm of RF output and 96 dBc@10khz of phase noise. Range information is earned the data through digital signal processing of IF signal. For the estimation of range measured, we analyze the difference between real range and measurement range, and also suggest the method to remove the measurement error using average processing and amplitude properties. A result is 0.12 and 0.00422 deviation in l0mn-30m and within 5m respectively, and then 2.4E-04 deviation in 4m by using compensation of level characteristics lately.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7A
• /
• pp.554-561
• /
• 2009

In this paper, we propose a novel Vehicular Ad-hoc Network(VANET) which includes communication and ranging features, using Spread Spectrum(SS) multi-carrier modulation scheme. In existing methods, a spread spectrum technique was used to communicate with other vehicles and raging was possible by detecting phase difference between transmission/reception of the PN signal. However, the use of high-speed PN signals is mandatory to detect possible errors of phase difference and to increase the analysis capacity. In the proposed system, multi-carrier modulation scheme was used as solution of mentioned problem. The multi-carrier modulation scheme uses smaller PN signal and chip-rate than the single-carrier modulation, so it is possible to send multiple carrier waves using the same frequency range. This technique (multiple carrier waves) allows to have the Equal Gain Combing (EGC) diversity effect, providing better result in phase difference error detection and raging accuracy.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.2
• /
• pp.73-84
• /
• 1992

This paper studies noise subtraction methods and distance measures for speech recognition in a noisy environment, and investigates noise robustness of the distance measures applied to the problem of isolated word recognition in white Gaussian and colored noise (vehicle noise) environments. Noise subtraction methods which can be used as a pre-processor for the speech recognition system, such as the spectral subtraction method, autocorrelation subtraction method, adaptive noise cancellation and acoustic beamforming are studied, and distance measures such and Log Likelihood Ratio ($d_{LLR}$), cepstral distance measure ($d_{CEP}$), weighted cepstral distance measure ($d_{WCEP}$), spectral slope distance measure ($d_{RPS}$) and cepstral projection distance measure ($d_{CP},\;d_{BCP},\;d_{WCP},\;d_{BWCP}$) are also investigated. Testing of the distance measures for speaker-dependent isolated word recognition in a noisy environment indicate that $d_{RPS}\;and\;d_{WCEP}$ which weigh higher order cepstral coefficients more heavily give considerable performance improvement over $d_{CEP}and\;d_{LLR}$. In addition, when no pre-emphasis is performed, the recognizer can maintain higher performance under high noise conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.575-582
• /
• 2009

The localization algorithm(LAtu) using the IDentification Code($C_{ID}$) is suggested in RSS(Received Signal Strength) based Wireless Sensor Network(WSN), and the localization system using the suggested algorithm is designed and implemented in this paper. In addition to this, the performance of ranging correction quality and localization error of the localization system(System(LAtu)) that is developed using the LAtu is analyzed and compared with that of the localization system(System(LAieee)) using the channel model of IEEE 802.15.4 standard(LAieee) by the actual experimentation. From the experimentation, the ranging correction quality is analyzed that the LAtu is highly better than the channel model of LAieee about 34% under the distance between the moving module and the beacon module($D_{MM-BM}$) is 2m, and is also a few better than that of the LAieee about average 5% under the $D_{MM-BM}$ is above 5m. The localization error quality of the System(LAtu) is lower than that of the System(LAieee)) about 1cm under the lecture room and 4cm in the large lecture room.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.9-16
• /
• 2005

The performance of satellite range measurement using tone method was analyzed in the presence of satellite link AWGN. The phase errors in range measurement are generated by AWGN of satellite up- and down-link and the degradations of satellite range measurement are dependent on the transmission mode and loop bandwidth of satellite measurement system. The analyzed effects for satellite measurement in presence of satellite link noise were also analyzed with the measured satellite range data via satellite range measurement system operating in satellite link AWGN. In RAU mode, the satellite range differences of 14.4 to 40.6 m were occurred according to the loop bandwidth of satellite range measurement system and the degradation of 0.3 dB compared with theoretical value was generated under condition of the signal-to-noise ratio of 43 dB. In RAU and TM mode, the performances of range measurement were approximately agreed to the that of RAU mode. In order to get the equal performance characteristics with RAU mode, the signal-to-noise ratio of satellite link for RAU and TM mode should be increased by signal power of 2.3 dB, which is a power loss due to transmission of telemetry signal.