• The Safety technology
• /
• no.136
• /
• pp.48-51
• /
• 2009

• The Safety technology
• /
• no.93
• /
• pp.64-67
• /
• 2005

• Proceedings of the Safety Management and Science Conference
• /
• 2006.11a
• /
• pp.1-8
• /
• 2006

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.317-318
• /
• 2012

Although installations and usages of gang-form that has advantages of preventing fall disaster, the serious disasters from gang-form occur every year. This research focused on the continuous prevention of disasters in construction of outer wall of apartment working site through step by step safety management worker's checking table. The result is the worker's checking table for safety management in apartment gang-form works, through safety guidelines case studies, interviews with safety management experts and then extracting a check list.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.97-98
• /
• 2018

Despite of its advantange on shortening framework period of a super-tall building, gangform is prone to high safety risk due to its heavy weight during operation. Thus, this study is conducted to investigate the applicability of a lightweight gangform made of engineering composite materials. Compared to the conventional gangform, the proposed gangform showed greater performance not only in reduction of safety accidents on-site, but also in constructability and environmental aspects. The results of this study are expected to be served as the basis for developing the lightweight gangform in future.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.135-136
• /
• 2017

This paper examines the efficiency of the application of conventional and insulated gang forms for curing and protection of concrete by comparing the amount of electric energy required therefor. In addition, a thermal vision camera was used to identify heat loss from surfaces of the gang forms after each placement of concrete. Experimental results, show that the heat loss at the submerged temperature was large at the submerged surface due to the large calorific value at the surface of the mold. The insulated gang form had some heat loss in the horizontal bars. In the case of adiabatic reforming, the pattern shows a constant calorific value over time. In conclusion, the insulation performance is better than that of general gang form.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.11-12
• /
• 2011

This study examine Effect of Change of Compressive Strength of Concrete Members with Insulating Gang form on Temperature History of Concrete Positions. Test show, insulating gang forms differences and gang forms have 10℃ on peak point temperature of surface and Center if temperature history have 24Mpa by change of compressive strength. In addition, there have 14℃(16℃) on peak point temperature of surface and Center if temperature history have 40(60)Mpa. Therefore, insulating gang forms have an effect insulating performance.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.114-115
• /
• 2019

Gangform is used as exterior wall forms in the most of apartments. Existing system forms developed for high-rise building, RCS and ACS, are too heavy and over-designed to be applied to general apartments, leading to higher costs. A more simplified rail Gangform(R/GF) is also used, but it depends entirely on T/C for the lift like Gangform. The T/C's legal inactivity time for moving Gangform and materials has increased, and the higher allowances have to be paid for overtime work, thus causing to the cost increase and time delay. Therefore, this study aims to develop an automated Gangform climbing system that can be used universally and economically in apartment houses. The use of the development system is expected to improve the safety of Gangform operations and reduce the workload on T/C.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.2
• /
• pp.127-134
• /
• 2017

In this study, moist curing equipment was used in the exist gang-form system. By achieving sufficient spray curing, the quality of the concrete was improved and the cracking occurred in building's side wall was decreased. The following results could be made as the conclusion. For the compressive strength, all zones showed the similar results. Comparing with the zone without using moist curing equipment, the zone used moist curing equipment showed higher rebound hardness results. For the cracking, the zone utilized moist curing equipment showed the cracking averaged as 6.6 m and the zone without using moist curing equipment showed the cracking averaged as 10.3m. The effectof reducing cracking by utilizing moist curing equipment is about 36 %. Using moist curing equipment is considered as a good solution to reduce the cracking in the structure. Considering all the factors analysed, using moist curing equipment improved the quality of the concrete and decreased the cracking. When this equipment was used in the construction site, it is expected that the construction periodcan be shrunk and the ratio of defect caused by drying shrinkage can be decreased. In this research conditions, The 0.3mm sized moist curing equipment provided the most desirable results on concrete quality and preventing cracking.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.863-873
• /
• 2023

This research explores the efficacy of safety vest colors at construction sites to enhance worker safety. Utilizing the Munsell color system and the Korean Standard Color Analysis program(KSCA), the study developed a prototype safety vest tailored to specific types of construction work. A safety vest with a color contrasting the site's environment significantly improves worker visibility and intuitiveness in identification, potentially reducing safety incidents. The study determined the optimal color specifications(hue, value, chroma) for safety vests in various construction roles, such as 10GY, 8, 8 for rebar placement, 8.75B, 7, 8 for Euroform, 3.75B, 2, 4 for Gangform, and 6.25BG, 5, 10 for steel erection. Feedback from construction experts on these prototypes, particularly regarding the safety vests for rebar placement and steel framework, was overwhelmingly positive(90% approval). Consequently, the proposed safety vest color scheme is deemed highly effective.