• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.907-910
• /
• 2007

최근 물류의 양이 증가함에 따라 컨테이너를 사용한 해상 물동량이 급격히 증가되어 부두에서 처리하여야할 컨테이너 양이 많이 증가되었다. 이에 항만에서의 물류비용 절감을 위해 항만 자동화에 관한 관심이 증대되고 있다. 항만의 자동화는 선박에서 컨테이너를 운반할 트레일러가 통과하는 RFID를 이용한 게이트의 자동화, 정박한 선박에 설려 있는 화물을 취급하는 Quay-Side 컨테이너 크레인(QC)의 자동화, 야드에서 컨테이너를 이적하는 갠트리크레인(GC), 게이트 사이에서 컨테이너를 수송하는 컨테이너 트랜스 포터의 자동화로 크게 분류할 수 있다. 부두의 운용 효율을 증가시키기 위해서는 야드 크레인의 정확한 위치 검출이 상당히 중요한 과제이다. 본 논문에서는 UWB위치인식 시스템을 적용한 야드 크레인의 자동화에 대하여 논의하고 개발방향을 제시하고자 한다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2007년도 추계학술대회 및 제23회 정기총회
• /
• pp.272-276
• /
• 2007

최근 해상교량의 건설이 증가하면서 해상교량의 건설로 인한 여러 가지 문제점들이 보도되고 있다. 인천 제2연륙교의 건설지연을 비롯한 여러 가지 문제점은 이러한 분쟁의 대표적인 예라고 할 수 있다. 특히 해상교량 건설 이전에 이미 그 해역을 항행하고 있던 선박과 그 선박을 이용해 이루어지던 물류의 흐름을 저해하는 해상교량의 건설은 장기간의 국가경제라는 측면에서 보면 커다란 손실을 입히게 될 것이라는 것을 누구라도 예측할 수 있다. 이 연구에서는 해상교량이 건설될 경우 선박교통의 흐름과 항만 운영에 미치게 되는 영향에 대하여 조사함과 동시에 실제 선박을 조선하여 해상교량 하부의 항로를 통과하여야 하는 도선사들의 의견을 수렴하여 문제점을 분석하고, 그 결과를 정리하여 향후 해상교량 건설의 표준안을 세우는데 기초 자료로 활용하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.307-307
• /
• 2000

The swing motion of the spreader during and after movement causes an efficiency problem of position control in unmaned gantry crane. The objective of this research is to design implementable stabilizing controllers that minimize the swing motion of spreader in precise position control. The dynamic equations related to trolley, rope, and spreader are derived. For constitute a similar actual system, we introduced a conception of spring and damper in the connector. It is located between the trolley and link that is used in stead of rope. We derived dynamic equation by appliance that friction and external disturbance are occurred to the connector. We constituted of position servo system and velocity servo system for the control of position and velocity of the trolley and constituted of lag compensator system for the control of sway of the spreader. And we will show an effect of the proposed system in this research finally.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.219-223
• /
• 2006

This paper presents a gantry type 3-axes positioning system, which is useful to test control algorithms for coordinate measuring machines and industrial cranes. The dynamic characteristics of the system have been investigated through a series of finite element analysis and experiments. In order to minimize the residual vibration during movement, this paper implements input shaping algorithms for the system with the information from the dynamic analysis. The results show that the dynamic performance of the system can be significantly improved by the dynamic analysis and implementation of input shaping

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.545-550
• /
• 2001

This paper studied on the lateral motion and yaw motion of the gantry crane that is used for the automated container terminal. Though several problems are occurred in driving of the gantry crane, they are solved by the motion by the operators. But, if the gantry crane is unmanned, it is automatically controlled without any operator. There are two types, cone and flat type in driving wheel shape. In cone type, the lateral vibration and yaw motion of crane are issued. In flat type, the collision between wheel-flange and rail or the fitting between wheel-flanges and rail is issued. Especially, the collision between wheel-flange and rail is a very critical problem in driving of unmanned gantry crane. To bring a solution to the problems, the lateral and yaw dynamic equations of the driving mechanism of two driving wheels are derived. Then, we investigate the driving characteristics of gantry crane. In this study, the proposed controller, based on Model Based Controller, is used to control the lateral displacement and yaw angle of the gantry crane. And the availability of the proposed controller is showed through the comparison with the result of the proposed controller and PD controller. The simulation results of the driving mechanism, using the Runge-Kutta Method that is one of the numerical analysis methods, are presented in this paper.

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.165-170
• /
• 2011

In this paper, wind force coefficient by wind tunnel experiment is obtained to compute the accurate wind force of the gantry crane model to be used for mobile harbor ship. The first crane model was tested under 20, 30, 40, 52m/s, partially 58m/s and the wind force coefficient is about 2.0 which is very close to the suggested theoretical value. The other is the more reliable crane model and tested under 20, 30, 40m/s also giving the similar realistic wind force coefficient. Also structural analysis of crane model was performed giving the reliable stress level. Since the rolling effect is important for mobile harbor ship, the safety of the crane on the ship needs to be guaranteed. For this, using the computed reaction forces, a tie-down design is suggested which connects the crane and ship to resist the turnover motion of the crane.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.159-167
• /
• 2000

During the operation of crane system in the container yard, it is necessary to control the crane trolley position so that the swing of the hanging container is minimized. Recently an automatic control system with high speed and rapid transportation is required. Therefore, we designed a controller to control the crane system with disturbances and weight change. In this paper, we present the neural network two degree of freedom PID controller to control the swing motion and trolley position. Then we executed the computer simulation to verify the performance of the proposed controller and compared the performance of the neural network PID controller with our proposed controller in terms of the rope swing and the precision of position control. Computer simulation results show that the proposed controller has better performances than neural network PID with disturbances.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.708-712
• /
• 2000

The sway motion of the spreader during and after movement causes an efficiency problem of position control in unmaned gantry crane. The objective of this research is to investigate the phenomenon that the load is taken by the sway motion of crane. For deriving the dynamic equations related to the swing motion of crane, we introduced a conception of spring and damper in the upper part of the crane. During the crane and trolley is driving along the velocity profile, the swing motion of the spreader and crane will be simulated. The simulation result of the equation of motion using the Rung-Kutta method is presented in this paper. And we will show an effect of the swing of the crane in this research.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.283-283
• /
• 2000

In this paper, we deals with a decentralized control scheme with input compensation form for gantry crane systems. By considering the gantry crane's characteristics, the system is decentralized into two subsystems such as the travelling and sway subsystem, and the hoisting subsystem. For decentralizing the system, a simple algorithm is proposed using observability canonical form. The decentralized subsystems include unknown input which coupled with other subsystems and actuator failures. These unknown input and actuator failures are estimated by using PI observation techniques and those estimated values are used to construct an input compensation form. Lastly, the proposed decentralized control scheme far the gantry crane systems is verified by crane simulation.

• 제어로봇시스템학회논문지
• /
• 제7권4호
• /
• pp.281-287
• /
• 2001

In this paper, we deal with a decentralized control scheme with input compensation form for gantry crane systems. By considering the gantry cranes characteristics, the system is decentralized into two subsystems, the travelling and swaying subsystem and the hoisting subsystem. For decentralizing the system, a simple algorithm is proposed using the observability canonical form. The decentralized subsystems include unknown inputs that one coupled with other subsystems and actuator failures. These unknown input and actuator failures are estimated by using PI observation techniques. And those estimated values are used to construct an input compensation form. Finally, the proposed decentralized control scheme for the gantry crane systems is verified by crane simulation.